1 / 72

Principles of Voice & Data

Principles of Voice & Data. Lesson 5: Analog and Digital Signaling Bellevue Community College Bob Young, Instructor. Signaling Categories. Supervision Addressing Alerting Let's look at each of these three categories in more detail. Signaling Categories: Supervision.

fonda
Download Presentation

Principles of Voice & Data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Principles of Voice & Data Lesson 5: Analog and Digital Signaling Bellevue Community College Bob Young, Instructor

  2. Signaling Categories • Supervision • Addressing • Alerting Let's look at each of these three categories in more detail...

  3. Signaling Categories: Supervision • Detects changes to the line • On hook • Off hook • Call transfer • et cetera

  4. Signaling Categories: Addressing • Responsible for routing functions • Passes analog or digital routing information to the correct location to establish the connection • What are some analog routing signals? • What are some digital routing signals?

  5. Signaling Categories:Alerting • Signals intended for the user • often audible • ring • busy • call waiting • caller ID (inaudible) • et cetera

  6. In-Band & Out-of-Band Signaling • In-band signaling shares the same circuit or path as the voice or data • Out-of-band signaling uses a separate path

  7. In-Band Signaling • Also called "Channel Associated Signaling," or CAS

  8. In-Band Signaling • Standard for POTS lines • Standard for T1 circuits • Several inherent problems: • slow • susceptible to line noise • security issues

  9. Out-of-Band Signaling • Also called "Common Channel Signaling," or CCS

  10. Out-of-Band Signaling • Standard between Central Offices • Standard for ISDN • Several advantages: • faster • more reliable • more secure

  11. E & M Signaling • E & M Signaling is (was) used between Central Offices on trunks • It is (was) also used to connect DID trunks to PBX's

  12. E & M Signaling To prevent glare on E & M trunks: Use wink-start signaling!

  13. Wink-Start Signaling • A momentary change in line status sent as an acknowledgement. • Momentary loop current ("off-hook") • Momentary battery reversal • Momentary ground

  14. Glare • "Glare" is the condition that occurs when both ends of the same trunk are seized by two different switches for two different calls.

  15. 2-Wire E&M Voice Voice Voice Voice E-Lead E-Lead M-Lead M-Lead

  16. 4-Wire E&M RX Voice TX Voice RX Voice TX Voice TX Voice RX Voice TX Voice RX Voice E-Lead E-Lead M-Lead M-Lead

  17. E&M Signaling Types

  18. Ground Start Signaling Like E & M Signaling, • Ground Start Signaling is (was) used between Central Offices on trunks • It is (was) also used to connect DID trunks to PBX's

  19. Ground Start Signaling Primary advantage/reason for Ground Start Signaling: Prevents glare!

  20. Ground Start Signaling • To initiate a call, a ground is applied to the ring wire momentarily • The far end responds by grounding the tip momentarily • Start loop current, send DTMF or MF

  21. T1's and In-Band Signaling • Channelized T1 • 24 DS0's • 64 kbps channels • Minus 8 kbps for signaling • Leaves 56 kbps per DS0

  22. T1's and In-Band Signaling • Unchannelized T1 • One complete data "pipe" • 24 x 64 kbps = 1.536 Mbps

  23. T1's and In-Band Signaling • Bit robbing • Superframe (SF) robs 2 bits • A & B • Extended Superframe (ESF) robs 4 bits • A, B, C, & D • Indicate on-hook and off-hook for both ends of the circuit

  24. Uses for A & B Bits • Used for supervision in: • Digital E&M circuits • Digital loop start circuits • Digital ground start circuits • Digital OPX circuits

  25. ISDN • Integrated Services Digital Network • "ISmell Dollars Now!" • "It Still Does Nothing!"

  26. ISDN • All digital, from subscriber premise to Central Office • Uses out-of-band signaling • Also called "common channel signaling (CCS)

  27. Channel Structure Bearer Service -- 64 Kbs Data Channel -- 16 Kbs Overhead -- 48 Kbs

  28. Service Levels • Basic Rate Interface (BRI) • 2 Bearer Services plus 1 Data Channel • (2B+D) • Linking (Bonding) of Bearer Services • Primary Rate Interface (PRI) • 23 Bearer Services plus 1 Data Channel • (23B+D) • Linking (Bonding) of Bearer Services

  29. Let's Do the Math… • 2B+D = (2 x 64) + 16 = 144 Kbs • With overhead: 2B+D+O = (2 x 64) + 16 + 48 = 192 Kbs

  30. The Data Channel At the PRI level, a single Data Channel can support multiple "T1's" with 24 Bearer Services each.

  31. PRI Bearer Services • For example: • 3 "T1's" 24 + 24 +23 B channels 1 D channel

  32. "Parts" and Service • ISUP • Integrated Services User Part • SCCP • Signaling Connection Control Part • TCAP • Transaction Capability

  33. H Channels • Whenever ISDN B channels are combined, they are called H Channels

  34. ISDN H Channels

  35. ISDN in the UK • UK: ISDN 2e equivalent to US BRI • Bearer channels are called e-channels • Multiple Subscriber Numbering (MSN) service is used to provide voice and data signaling services

  36. ISDN in the UK • ISDN 30 equivalent to US PRI • ISDN 30 (ADS 2) provides up to 30 bearer channels • Not compatible with Europe • ISDN 30 (I.421) provides up to 30 bearer channels • Compatible with Europe

  37. ISDN Protocols • I.430 • Q.921 • Q.931 • Q.932 • Let's examine these...

  38. ISDN Protocols: I.430 • Defines the reference points between the CO and the terminal equipment (user's equipment)

  39. ISDN Protocols: I.430Reference Points • U Interface: 2 wire connection, terminated by an RJ-11 • S/T Interface: 4 wire connection, terminated by an RJ-45 • Network Termination Equipment (NTE) • Converts U Interface to S/T Interface • Terminal Adaptor: connects multiple devices to the S/T Interface

  40. ISDN Protocols: Q.921 • This protocol is specific to ISDN • Also known as LAP-D

  41. LAP-D (Q.921) • Stands for, "Link Access Procedure - D Channel" • Part of the Q.921 Protocol • Used to control connections

  42. LAP-D (Q.921) • Operates solely in the ISDN D-channel • Provides flow control • Provides data reliability

  43. ISDN Protocols: Q.931 • This protocol is used to establish and end sessions (voice or data) in other words, it is for: • Establishing connections • Terminating connections

  44. Q.931 Message Types

  45. Q.931Session Termination Caller B Caller A Step 1 On hook - send DISCONNECT message Step 2 Receive DISCONNECT message Send RELEASE message Step 3 Send RELEASE COMP message Send RELEASE COMP message

  46. ISDN Protocols: Q.932 • Used to modify a call (session) in progress • Transfer a call • Place a call on hold • etc.

  47. PISN Private Integrated Services Network Connects standard telco services AND LAN and data services

  48. PINX • Private Integrated Services Network Exchange • Also called an Integrated Services PBX • Core element in a PISN

  49. PISN Advantages • Multiple vendors can be mixed • Multiple communications protocols • Multiple topologies • star, token ring, etc. • Multiple technologies • Ethernet, wireless, satellite • VPN capabilities on public networks

  50. PISN: Two Main Elements • End Nodes • VoIP Phones • Computer Work Stations • Servers • Transport Nodes • PBX • Router

More Related