1 / 24

High Pressure Motor Valve

High Pressure Motor Valve. High Pressure Motor Valve. Motor: One that imparts motion. High Pressure: 1” & 2” Screwed connection rated to 4000 psi standard. Can be rated up to 6000 psi. High Pressure Motor Valve. FIELD REVERSIBLE TOPWORKS. OPEN YOKE. POSITION INDICATOR. STUFFING BOX.

forest
Download Presentation

High Pressure Motor Valve

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. High Pressure Motor Valve

  2. High Pressure Motor Valve Motor: One that imparts motion. High Pressure: 1” & 2” Screwed connection rated to 4000 psi standard. Can be rated up to 6000 psi.

  3. High Pressure Motor Valve FIELD REVERSIBLE TOPWORKS OPEN YOKE POSITION INDICATOR STUFFING BOX No adjustment No lubrication Teflon – low friction BALL AND CONE SEAT

  4. High Pressure Motor Valve

  5. Field Reversible Topworks

  6. High Pressure Motor Valve

  7. High Pressure Motor Valves

  8. 65 Topworks • 65 sq. in. diaphragm • P. O. service • Extends 1” HPMV with ½” • inner valve to 4000# W.P. • Extends SMS valve to • 4000# W.P. • Available for 1”, 2” and • non-freeze HPMV • Wide spring adjustment • range

  9. Manual Valve Positioner Each revolution of the handle moves the stem 1/16” Used as a limit for valve stem travel Used to manually open the valve on unit start-up ¾” max. stem travel

  10. Pneumatic Valve Positioner Maintains stem position through changes in force on stem Provides repeatable stem placement

  11. Soft Seat Maximum pressure drop: 300 psi 15/16” port in 1” valve 1-1/2” port in 2” valve On / Off service only

  12. Improving Service of HPMV’s Size Valve Properly. Valve should operate between 50% and 80% of its capacity Use quick opening trim in erosive service. Use Carbide or Zirconia trim in highly erosive service. Use Equal Percentage trim for controlling pressure or flow rate.

  13. Trim Characteristics SNAP NOMINAL =%AGE

  14. Ceramic Trim Carbide Zirconia

  15. Maximum Pressure Drop 1” Motor Valves 2” Motor Valves I.V. Throttle Relief I.V. Throttle Relief 1/2” 3/8” 1800 2700 3600 5400 1” 3/4” 900 2000 1800 4000

  16. Piston Balanced High Pressure Motor Valve • Full line size port • Balanced plug • Soft seat with metal • to metal backup • Field reversible topworks • Equal Percentage Trim • Bubble tight shut-off Sizes available: 2”, 3,” 4” & 6”

  17. Piston Balanced High Pressure Motor Valve Maximum Working Pressure: Connection W. P. 2” Screwed 4000 psi. 2” Flanged ANSI 1500 (3705 psi*) 3” Flanged ANSI 600 (1480 psi*) 4” Flanged ANSI 600 (1480 psi*) 6” Flanged ANSI 600 (1480 psi*) *For working pressure vs. working temperature of these flanges see ANSI B16.2.

  18. 1” Non-Freeze Dump Valve • Inner valve located to • utilize vessel heat to • prevent freezing • 1” NPT inlet & outlet • 2” NPT vessel mounting • Up to 4000 psi W.P. • 1/8” –1/2” inner valves available

  19. Non-Freeze Dump Valve Vertical Separator

  20. Non-Freeze Dump Valve Horizontal Separator “Stinger”

  21. Metering Valve Calibrated in 1/64” equivalent orifice diameter Available in 1”& 2” standard HPMV Also available in 2” & 3” piston balanced HPMV

  22. Piston Balanced Metering Valve

  23. Optional Vee Packing Max. Temperature: 500oF Glass filled Teflon Virgin Teflon Carbon filled Teflon Glass filled Teflon

More Related