50 likes | 217 Views
Gothic arch break-down chairs Original chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún Pól Ó Briain. 40”. 41”. 10”. 11”. 20.5”. 24”. to make this chair back. 1 of each of these, glued together. Arm Rise (Cut/assemble two per chair).
E N D
Gothic arch break-down chairsOriginal chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún Pól Ó Briain
40” 41” 10” 11” 20.5” 24” to make this chair back 1 of each of these, glued together
Arm Rise(Cut/assemble two per chair) Seat(Cut one per chair) 24” 20.5” 16” 21.5” 16.5” 5” 26” 1.0” .75” 29” 1.5” 18” 8” 1.0” Three times the thickness of the sides The thickness of the sides 16.5” Front of Seat Chair Legs(Cut two per chair) Detail of the tabs The left space (shaded area) is the thickness of the sides of the chairs. (I used ¾” plywood.)
10” 21.5” Position the seat slots so the rear of the seat is 1” lower than the front. Make the line of the slots for the back perpendicular to the seat, (dashed line) 16.5” 5” 29” 26” ½” 18” 17” 8”
How to layout on 4’ X 8’ sheets of Plywood 18mm or ¾” Plywood 12mm or ½” Plywood