1 / 14

Memory

Memory. Sephiroth Kwon GRMA 26-05-2009. Outline. Introduction DDR II DDR III Repair Flow Chart Repair Technique. Introduction. Memory Module. North Bridge. Type 1. Main Clock Gen. Memory Module. North Bridge. CPU. Type 2. Main Clock Gen. DDR II. DDR2.

gale
Download Presentation

Memory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Memory Sephiroth Kwon GRMA 26-05-2009

  2. Outline Introduction DDR II DDR III Repair Flow Chart Repair Technique

  3. Introduction Memory Module North Bridge Type 1 Main Clock Gen. Memory Module North Bridge CPU Type 2 Main Clock Gen.

  4. DDR II

  5. DDR2 • DDR2 SDRAM (Double Data Rate Two Synchronous Dynamic Random Access Memory) • DDR2 modules use a 1.8V power supply • DDR2 has 240 pins

  6. DDR2

  7. DDR3 DDR3 SDRAM(Double Data Rate Three Synchronous Dynamic Random Access Memory) DDR3 SDRAM improves on DDR2 SDRAM in several significant ways: Higher bandwidth due to increased clock rate Reduced power consumption due to 90nm fabrication technology Pre-fetch buffer is doubled to 8 bits to further increase performance The voltage of DDR3 SDRAM DIMM's was lowered from 1.8V to 1.5V. This reduces power consumption and heat generation, as well as enabling more dense memory configurations for higher capacities.

  8. DDR3

  9. Repair Flow Chart START Visual Inspection check memory slot is no bent pin or damaged. NG OK Change any damaged memory slot NG OK Fix any voltage regulator or small inductor../trace open Measure memory Voltage Check memory Voltage 1.5V (1.8 or 3V) dual & Vtt NG OK NG OK Fix any trace or RLC damaged, change NG CLK Generator Measure memory Clock Check memory CLK 100/133/166..Mhz NG OK OK NG Measure memory DQ / Address,RAS#,CAS#,WE# NG OK Compare with good MB, trace NG signal Fix any trace open or resistor damaged OK NG Change NB Finished

  10. Repair Technique-Visual Inspection Visual Inspection to check memory slot is not damaged or bent pin inside. 1

  11. Repair Technique-Measure Memory Voltage Use Multi-Meter or Oscilloscope to measure Memory Voltage. 2-1 Memory Voltage: DDR2: 1.8 Dual, 0.8Vtt_DDR DDR3: 1.5 Dual, 2-2

  12. Repair Technique-Measure Memory Clock Use Oscilloscope to measure Memory Clock (100Mhz or 133Mhz, 166Mhz…depends on different chipset & memory) 3-1 3-2

  13. Repair Technique-Measure Memory Signals Plug Memory measure card into slot. Use Multi-Meter to measure memory signals’ bias voltage value. Compare with good MB if you find any unusual. 4-1

  14. Thank You!

More Related