1 / 13

“When in Doubt, Lock it out!”

“When in Doubt, Lock it out!”. May is Electrical Safety Month Training A product of the EFCOG Electrical Safety Task Group. History. A sharp increase in Complex Wide electrical events, since late 2009, caught the interest of EFCOG

garrett-potts
Download Presentation

“When in Doubt, Lock it out!”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. “When in Doubt, Lock it out!” May is Electrical Safety Month Training A product of the EFCOG Electrical Safety Task Group

  2. History • A sharp increase in Complex Wide electrical events, since late 2009, caught the interest of EFCOG • The Electrical Safety Subgroup (ESS-EFCOG) chartered a Hazardous Energy Control (HEC) subcommittee to analyze the electrical events • The HEC subcommittee developed “When in doubt – Lock it out” presentation for Electrical Safety Month (May 2011)

  3. Overview • Hazardous Energy Control is not always simple • Many electrical hazards “find” the worker • The general rule for electrical exposure is “WHEN IN DOUBT, LOCK IT OUT”

  4. Electrically Safe Working Environment 4 Principles 1. BEFORE starting work - establish an Electrically Safe Work Condition 2. Until proven otherwise – consider it energized 3. Establish clear boundaries around exposed and potentially energized electrical equipment 4. Working on energized circuits is always a last resort and not a first option - Make every attempt to work de-energized

  5. Important Definitions • “Exposed” - an energized conductor or circuit part is capable of being inadvertently touched or approached nearer than a safe distance by a person. • “Limited Approach Boundary” - distance (based on voltage) from an exposed energized electrical conductor or circuit part within which a shock hazard exists

  6. Establishing an Electrically Safe Work Condition • NFPA 70E “Standard for Electrical Safety in the Workplace” requires, except when justified, equipment to be de-energized and Lockout/Tagout applied • NFPA 70E – Prior to working within the Limited Approach Boundary of exposed electrical conductors and circuit parts at 50 volts or more – Lockout/Tagout is applied • WHEN IN DOUBT – LOCK IT OUT

  7. Energized until proven otherwise • Many shocks occur because: • a person believes that a piece of equipment is not energized • they do not consider the electrical energy a hazard. • Stored Electrical Energy (batteries, capacitors, etc.) must be considered and controlled • Many shocks are to non-electrical workers because they believe that a piece of equipment is safe – without realizing the potential for stored electrical energy • Never assume a system or component is de-energized – verify absence of voltage with an approved testing device

  8. Establish clear boundaries around electrical equipment when it is exposed and potentially energized • The Limited Approach Boundary • Starts at 42” (50-750 VAC) and expands as the voltage increases • Boundaries must be posted to • Warn people • Keep unqualified people out • Protect you when you are working

  9. WORKING ON LIVE CIRCUITS - THE LAST OPTION • Almost 200 people were killed in the workplace last year while working on energized equipment. • There are times when working on live parts is appropriate or necessary, but alternate methods should be considered before working on live parts • Working on live circuits is not a matter of convenience

  10. WHEN IN DOUBT… • Verify before you work on equipment • If you see someone working on something that might be live, look for the work area boundaries – 70E requires them • If you think you need to work on energized circuits; contact your local Electrical Safety professionals or cognizant management for assistance in doing it safely

  11. …LOCK IT OUT • The Lockout/Tagout process is site specific but every process has some commonalities: • 1 lock, 1 key, 1 worker • Don’t share your key • Don’t work under anyone else’s lock • Don’t let anyone work under your lock • Verification is a must before you start work – if something is missed during the lockout process, verification will save your life!

  12. May is Electrical Safety Month • Apply lockouts when necessary • Minimize or eliminate energized work activities whenever possible • Treat every exposed piece of equipment as energized until you prove that it is not • WHEN IN DOUBT – LOCK IT OUT!

  13. May is Electrical Safety Month Additional briefings are available and specific to the type of facility worker: • Administrative and Non-Electrical Worker General Electrical Safety Electrical Cord Safety Subcontract Electrical Safety Electrical Safety Near Power Lines Electrical Safety During Excavations • Electrical Workers Working with Common Neutrals Electrical Measurement Safety Battery Handling and Safety SOURCE: http://efcog.org/wg/esh_es/Electrical_Safety_Training/elecsafetytng.htm

More Related