1 / 11

PVB ¾”- 2”

PVB ¾”- 2”. Modification Overview. Production for the ¾” – 1” PVB began in 1995 and is current. The body of the ¾” – 1” PVB was modified in July of 2005. A spring clip was added under the float assembly for serial numbers P0001 or larger.

garson
Download Presentation

PVB ¾”- 2”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PVB¾”- 2”

  2. Modification Overview • Production for the ¾” – 1” PVB began in 1995 and is current. • The body of the ¾” – 1” PVB was modified in July of 2005. A spring clip was added under the float assembly forserial numbers P0001 or larger. • 1½” and 2” sizes were added in 2008. (Refer to the Wilkins 720A)

  3. Canopy Removal • The canopy is secured by two screws.

  4. Bonnet Removal • The bonnet is threaded into the body and sealed by an o-ring. • Unscrew the bonnet counter clockwise. • There is no spring load.

  5. Float Removal and Service • The float and float spring are free once the bonnet has been removed. • Replace the rubber seal by pulling it from the groove on the float.

  6. Check Valve Removal • The spring clip must be removed on versions made after July 2005. • Pinch the ends of the spring clip together and pull out of the body. ** Note: Use pliers if necessary.

  7. Check Valve Removal • The check valve is a module. • The check valve is threaded into the body and sealed by an o-ring. * * Note: A special tool is needed to remove the check module.

  8. Check Valve Disassembly • The check module is spring loaded. • Hold the check firmly while removing the retaining screw.

  9. Check Disc Replacement • Replace the rubber disc by pulling it from the groove on the poppet.

  10. Check Seat Replacement • The check seat is free once the module is disassembled. • If the seat is damaged, the check module must be replaced.

  11. Reassembly Notes • Reassemble in reverse order. • Make sure the bonnet spring is in place. • Make sure the guide stem is inserted into the center of the float.

More Related