240 likes | 268 Views
Character of metallic systems. Advanced materials and technologies 2017. Properties determined by: chemical bond (electron configuration), atomic/molecular structure (for example type of crystal-lattice or amorphous structure…) defects in the lattice, microstructure (phases, grain size …).
E N D
Character of metallic systems Advanced materials and technologies 2017
Properties determined by: • chemical bond (electron configuration), • atomic/molecular structure (for example type of crystal-lattice or amorphous structure…) • defects in the lattice, • microstructure (phases, grain size …)
Every element is characterised by a number (X), which is called electronegativity This number characterises the electron affinity of the element. If a connection forms between two different elements (chemical bond), than this number can be used to characterise the chemical bond. if XA≈ XB, and XA, XB > XH, covalent bond (e.g. organic compounds, diamond, graphite), if XA>>XBionic bond (e.g. NaCl, KCl), if XA, XB low, XA≈ XB < 1,8–2 metallic bond.
Covalent bond - Formed by pair of electrons (XA, XB ~ ≥ 2,1), - High binding energy (e.g.: C, Si, Ge), - Directions in bonding (pl. C-H4). Energy of molecular hydrogen referred to separated, neutral atoms. Negative energy corresponds to chemical bond. Curve A refers to electrons with parallel spin states, curve S (stabile state) refers to electrons with antiparallel spin states.
Types of chemical bond are not clearly ionic, covalent or metallic, these might be mixed character
Structure of the metallic bond Pauli exclusion principle Metallic ion lattice in electron gas
CV T Heat capacity and its dependence of temperature at metals and ceramics Dulong–Petit-rule: CV= 3R= 25 Jmol-1K-1 (R= 8,314 Jmol-1K-1) (for solid state, at high temperature) Metallic character: value of 3R is reached at lower temperature Reason of the difference: electron configuration, the difference in chemical bond. C = T + AT3 (T<<200 K) ~NkBT/TF ahol TF=εF/kB Free electrons + addition of lattice (core)
R=R0(1+α(T-T0)) At some metals: α~ 1/273 K-1 Source: Prohászka
Wiedemann—Franz-rule: n: charge density (number of carrier in vol.) e: charge of electrons : hop time m: weight of electrons kB: Boltzmann-constant Electrical conductivity: Heat conductivity is derived from the free electrons:
Free electron theory: Electron gas theory (Fermi–Dirac-statistics): Fill up density (probability) of ε energy level (electron shell) : chemical potential If T→ 0K, then → εF where εF: Fermi-level. If kBT<<(ε-) (high energy interval), then Boltzmann distribution function: Grey area shows the occupied states at absolute 0 K. If temperature increases from 0 to T, then avarage energy increases; electrons are thermaly excited from area 1 to area 2. Source: C. Kittel: Introd. to solid state physics
Energy distribution of electrons in metals. Electrons with higher energy than WB are able to quit from the metal. From these electrons quits in fact those, at which equation 1/2mvX2>WB is true. Boundary velocity:
e e 1 1 f(e) f(e) S B B A T1+DT T1 Example: thermopower investigation of alloys Seebeck effect:
Example: thermopower investigation of alloys Difference in elect. potential Hot electrode (T1) Sample Cold electrode (T2)
Example: thermopower investigation of alloys Source: Weltsch Ag47 Cd48 In49 Sn50 Sb51 Higher atomic number of alloying element means the increase of valence electrons per atom.
What is themechanicalcharacter of theelements? Is thereanycorrelationwithotherfactors?Is thereanycorrelationwithelectronconfiguration?Doesitdependonbondingtypes? Young’s modulus of elements as a function of position in periodic system.
What is the hardness of the elements? Is there any correlation with other factors?Is there any correlation with electron configuration?Does it depend on bonding types? Hardness of the elements as a function of position in periodic system or electron configuration (valency electrons).
Melting point of the elements as a function of position in periodic system or electron configuration (valency electrons).