1 / 15

XP-8 RTI Advanced System Control Processor

XP-8 RTI Advanced System Control Processor. Key Features: -(8) MPIO (Multi-purpose Input Output) ports -(8) Bi-directional RS-232 ports -(8) Sense inputs -(8) Programmable relay/voltage trigger outputs -Real time astronomical clock for time, day of week,

geneva
Download Presentation

XP-8 RTI Advanced System Control Processor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. XP-8 RTI Advanced System Control Processor

  2. Key Features: -(8) MPIO (Multi-purpose Input Output) ports -(8) Bi-directional RS-232 ports -(8) Sense inputs -(8) Programmable relay/voltage trigger outputs -Real time astronomical clock for time, day of week, and interval based functions -Rack mountable -Non volatile Flash memory

  3. SD/MM Memory Card Slot Reset Button Menu Button Cursor Control Buttons IR Output Adjustment Controls Display Backlight Button USB Programming Port

  4. Bi-directional RS-232 Ports Sense Inputs Relay/Trigger Outputs USB RTI COM Port MPIO Ports (IR out, RS-232, Sync in) IR Connections Ethernet Expansion Port

  5. MPIO’s (Multi Purpose Input/Output ports) -Each MPIO can directly drive up to 4 IR Emitters -Direct injection of IR to rear panel of devices -Use with Video Sync or Voltage Sense modules -Use for RS-232 communication with CM-232 module

  6. RS-232 Ports -Category 5 with RJ-45 termination (568b) -(8) RJ-45 to DB-9 adapters included -Bi-directional RS-232 capable

  7. Sense Inputs -Sense contact closure -Sense voltage trigger -Upon sensing, events can be automatically triggered from the XP-8

  8. Relay/Trigger Outputs -Configure as contact closure or voltage trigger -5 or 12 +VDC, 100mA current capability -Normally open or normally closed -When configured as a trigger, A= +VDC, B= GROUND

  9. Infrared Terminals -Terminal: +12VDC Used to power external IR or RF receivers -Terminal: GND Ground reference for any device connected to any terminal (SIGNAL IN, +12VDC, HIGH OUT) -Terminal: SIGNAL IN IR or RF system trigger code input -Terminal: HIGH OUT 200mA IR output to power an external connecting block or IR blaster

  10. Ethernet Port RJ-45 port allows connection to LAN to download system files to the XP-8 USB Ports (rear) Host ports for external devices (future use)

  11. RTI COM Port RJ-45 port allows connection to a Zigbee transceiver (ZM-24) module, supporting full two-way communication with compatible RTI handheld controllers Expansion Port RJ-45 port provides a connection for IR signals for a CB-4 connecting block, or RS-485 serial communication with in-wall controllers, or expansion devices like the RCM-12

  12. MENU -Delivers the main menu if unlocked, the unlock screen if XP-8 is locked SEL -Selects menu/function EXIT -Navigate back 1 level (function to menu, or menu to previous menu) CURSOR Keys -Navigate the selected menu options

  13. Display - Sensing status of VPS-1/SPS-1 power sync modules - Status of each “Sense” input - Current state (open, closed) of each relay - Current firmware date/version - Time/date - On-screen diagnostics

  14. XP-8 Processing Rules -XP-8 will send standalone IR codes in the order they are received from the controllers -6 macro engines allow for the execution of up to six macros simultaneously -Once an IR command begins, it runs to completion -If a macro sends an IR code, it will wait at that step until the IR generator is free -Once a macro begins to transmit IR codes, that macro engine has exclusive use of the IR generator until it sends an instruction OTHER than IR (flag test, relay, delaying, etc.)

More Related