DSDSC-200 Exam Questions - Pass with Valid Dell DSDSC-200 Exam Dumps PDF

1. Dell Dell Certified Professional DSDSC-200 Exam QUESTIONS & ANSWERS (FREE - DEMO VERSION) Download Now Updated DSDSC-200 Exam PFD Demo Buy Full Product Here https://authenticdumps.com/dumps/dsdsc-200/

2. Version: 11.0 Queston: 1 An engineer has installed a Storage Array with a Tier 1 consistng of SSDs. What should the engineer do to optiiie perforiance for I/O workloads utliiing this Tier? A. Disable write cache on voluies. B. Convert Tier 1 to RAID 0. C. Segregate the SSDs to a separate disk folder. D. Change the sector siie froi 512 to 4K. Answer: A Queston: 2 An engineer has iapped a voluie to an existng Windows 2012 server. The engineer has confgured ioning and confried that all paths are correctly confgured. The operatng systei can only see one path within the MPIO sofware. Which step should the engineer take so that all paths are presented to the server? A. download and install the MPIO Manager B. run the coiiandipclaii.exe –i –d“COMPELNTCoipellent Vol “ C. change the Multpath IO (MPIO) policy to Round Robin within MPIO Manager D. change the operatng systei to Windows 2012 Pro MPIO within the server propertes on Storage Center Answer: A Explanatonn Referencen htpsn//www.google.coi/url?saattrcta=t&atesrcastsourceawebtcda2tcadar=atuacta=tveda0ah UKEw=Jn7yAi&HQAhXF1hoKHQAwBt=QFgg- MAEturlahtpp%Ap2Fp2Fen.coiiunity.dell.coip2Fcfs-flep2FFFkeyp2Ftelligent-evoluton- coiponents-atachientsp2F1%-4491-00-00-20-4%-79- 17p2FMicrosofF5F00FMPIOF5F00FBestF5F00FPractcesF5F002=00FCML1004F29005F00FFebruary2 016F5F00FUpdate.pdfp%Fforcedownloadp%DtruetusgaAFQ=CNGUlpAK9xCDTL6w4iCDA90vYF5ERQ tsig2aFPOFuUw9JhTx=f5AX4MP1A(page 2=) Queston: 3 An engineer needs to confgure a VMware host. According to best practcee the engineer needs to enable a feature by changing the variables QFullSaipleSiie and QFullThreshold. The engineer sets those two paraieters to the value of 0 in VMware ESXi 5.1 Patch 1 and later versions.

3. Which feature is enabled? A. Adaptve &ueue depth B. Enhanced Transiission Selecton (ETS) C. Asyiietric logical unit access (ALUA) D. Priority Flow Control (PFC) Answer: A Explanatonn At ties of high congestone VMware has an adaptve &ueue depth algorithi that can be enabled with the QFullSaipleSiie and QFullThreshold variables. These variables aid in relieving the congeston by dynaiically reducing and increasing the LUN &ueue depth. Due to the architecture of SC Series storagee enabling these setngs is not recoiiended unless under the guidance of Dell Copilot Support or Dell Support Queston: 4 An engineer needs to confgure a server. The server is connected to a Storage Center via iSCSI using or iore hardware iSCSI host bus adapters. If connectvity is lost due to controller failovere the server needs to reconnect to the Storage Center iSCSI target ports. Which HBA feature iust be enabled to ieet the re&uireient? A. Delayed ACK B. Spin Up Delay C. ARP Redirect D. MAC Spoofng Answer: C Queston: 5 A custoier has iapped a voluie to a ESX server using two = Gb Fibre Channel (FC) paths. The custoier needs the trafc to split e&ually across the two FC paths. Which ESX Mult-pathing policy should be used? A. Least Queue Depth B. Most Recently Used (MRU) C. Round Robin D. Fixed Answer: C Queston: 6 An engineer is perforiing failover testng on an FC-atachede dual-controller SC=000 systei. The

4. engineer notes that the custoier’s Windows 200= R2 servers experience I/O errors. The RHEL and ESX servers experience no probleis. A11 FC HBA tieouts are confgured per Dell best practces. The Windows servers that are experiencing issues have had no OS-level confguraton changes related to SAN storage. All servers use the saie FC fabric. What is causing the connectvity loss during failover? A. An incorrect OS type was selected when the Windows server ob=ects were created. B. The windows Disk TiieoutValue is NOT set correctly. C. NPIV is NOT enabled on Storage Center FC local ports. D. The FC cables plugged into the Windows servers have RX and TX reversed. Answer: D Queston: 7 A custoier has iapped a voluie to a Windows 200= server using two 16 Gb FC paths and two 1 Gb iSCSI paths. The custoier needs the trafc to split e&ually across only the two FC paths without using iSCSI under norial conditons. If the FC network is downe trafc should failover to the iSCSI paths to iaintain connectvity. Which Windows 200= iult-pathing policy should be used? A. Round Robin With Subset B. Fail Over Only C. Least Queue Depth D. Round Robin Answer: A Explanatonn Referencen htpsn//technet.iicrosof.coi/en-us/library/ee6197%4(vaws.10).aspx Queston: 8 According to the best practcese what are the correct values for the following paraieters on a QLogic HBA? A. Connecton optonsn0 – Loop onlyLoginretry countn60 ateiptsPort down retry countn60 ateiptsLink down tieoutn%0 seconds B. Connecton optonsn1 – point-to-point onlyLogin retry countn60 ateiptsPort down retry countn60 ateiptsLink down tieoutn%0 seconds C. Connecton optonsn1 – point-to-point onlyLogin retry countn%0 ateiptsPort down retry countn5ateiptsLink down tieoutn60 seconds D. Connecton optonsn0 loop onlyLogin retry countn%0 ateiptsPort down retry countn%0 ateiptsLink down tieoutn%0 seconds

5. Answer: C Explanatonn Referencen htpn//en.coiiunity.dell.coi/techcenter/extras/i/whiteFpapers/204%7971/download(page 11) Queston: 9 A deployient technician has cabled several enclosures on one chainn (1) SC200e (1) SC220e and (1) SC 2=0. When the deployient technician tries to confgure the Disk foldere soie disks are iissing. What is the cause of this problei? A. A SC200 iust be on a separate chain froi the SC220 and SC2=0. B. The SC220 iust be on a separate chain froi the SC200 and SC2=0. C. The SC2=0 iust be on a separate chain froi the SC200 and SC220. D. There are too iany disks on the saie chain. Answer: C Queston: 10 An engineer needs to install an LSI9206 SAS card in an existng SC=000 systei that runs version 6.1. Which step should the technician take to install this IO iodule? A. As a hot-add carde install the card in any slot without powering down the controller. B. Make sure that slots 1e 2e or% are available because the card can NOT be installed in a full-height slot. C. Download the LSI 9206 friware froi the Coipellent portal to apply to the card. D. Update the SCOS to version 6.% because this is the iiniiui version for this card to run. Answer: C Queston: 11 A deployient technician needs to install a dual-controller Storage Center with two Fibre Channel (FC) fabrics. The site will run in Legacy iode. What is the correct front-end cabling?

6. A. opton A B. opton B C. opton C D. opton D Answer: D

7. 20% OFF USE Coupen Code Save20 Thank You For Downloading DSDSC-200 Exam PFD Demo (Start Your DSDSC-200 Exam Prepration) Get Updated DSDSC-200 Exam Dumps PFD Demo & Pass in First Attempt Buy Full Product Visit the Link Below https://authenticdumps.com/dumps/dsdsc-200/