1 / 48

Optimizing Converged Cisco Networks (ONT)

Optimizing Converged Cisco Networks (ONT). Module 5: Implement Cisco AutoQoS. Module 5: Implement Cisco AutoQoS. Lesson 5.1: Introducing Cisco AutoQoS. Objectives. Describe the features of Cisco Auto QoS. List the prerequisites when using Cisco Auto QoS.

georgina-vernon
Download Presentation

Optimizing Converged Cisco Networks (ONT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Optimizing Converged Cisco Networks (ONT) Module 5: Implement Cisco AutoQoS

  2. Module 5: Implement Cisco AutoQoS Lesson 5.1: Introducing Cisco AutoQoS

  3. Objectives • Describe the features of Cisco Auto QoS. • List the prerequisites when using Cisco Auto QoS. • Describe the configuration steps necessary to deploy Cisco Auto QoS on routers and switches. • Describe the commands used to monitor Auto QoS on routers and switches.

  4. Enterprise QoS Challenges • Enterprise networks work with new traffic types: • IP telephony spreads quickly and requires QoS. • Mission-critical applications need guaranteed bandwidth. • QoS implementation requires significant “challenging” knowledge: • Simple networks require a simple QoS solution that works instantly. • QoS deployment should be cheaper and faster.

  5. Cisco AutoQoS: Automating the Delivery of Network QoS • Cisco AutoQoS—QoS for voice, video, and data: • Uses Cisco IOS built-in intelligence to automate QoS delivery for most common business scenarios • Protects business-critical data applications in the enterprise • Simplifies QoS deployment for real-time traffic • Reduces configuration errors • Makes QoS deployments simpler, cheaper, and faster • Follows DiffServ model and other standards in QoS • Allows customers to retain complete control over their QoS configuration

  6. Cisco AutoQoS: Automating the Key Elements of QoS Deployment • Application classification: Discovers applications and provides appropriate QoS treatment • Policy generation: Autogenerates initial and ongoing QoS policies • Configuration: Provides high-level business knobs, and automates QoS in multidevice domain • Monitoring and reporting: Generates intelligent, automatic alerts and summary reports • Consistency: Enables automatic, seamless interoperability among all QoS features and parameters

  7. Manual QoS Configuration Compared to AutoQoS Configuration Manual QoS interface Multilink1 ip address 10.1.61.1 255.255.255.0 ip tcp header-compression iphc-format load-interval 30 service-policy output QoS-Policy ppp multilink ppp multilink fragment-delay 10 ppp multilink interleave multilink-group 1 ip rtp header-compression iphc-format ! REMAINING 34 LINES LEFT OUT AutoQoS interface Serial0 bandwidth 256 ip address 10.1.61.1 255.255.255.0 autoqos voip

  8. Cisco AutoQoS Evolution • Cisco AutoQoS VoIP: • First phase addressed IP telephony. • One command provisions all basic QoS required. • Support is provided across broad range of platforms (switches and routers). • Cisco AutoQoS for the Enterprise: • Second phase extends capabilities (routers only) for data, voice, and video. • Two QoS deployment stages: • Discovers traffic types, load, and generates policy (NBAR) • Implements the generated policy

  9. Configuring Cisco AutoQoS: Router Prerequisites • It cannot be configured if a QoS policy (service policy) is attached to the interface. • CEF must be enabled at the interface or ATM PVC. • It classifies an interface as low speed (less than or equal to 768 kbps) or high speed (more than 768 kbps): • Correct bandwidth must be configured on all interfaces. • If low speed, an IP address must be configured on the interface.

  10. Comprehensive QoS Deployment in Two Phases • Phase 1: Run Auto Discovery to profile traffic: • Collects data from the offered traffic for several days or weeks as desired • Uses NBAR-based protocol discovery • Performs statistical analysis • Phase 2: Generate and deploy MQC-based QoS policies: • Maps applications to their corresponding DiffServ classes • Assigns appropriate values for bandwidth and scheduling parameters

  11. Trust Boundary DSCP-Marked Packets Traffic Classification and DSCP Marking (NBAR, ACLs, MQC Policy) Phase 1: Traffic Profiling on Routers with Auto Discovery • Process begins discovering and collecting data for Cisco AutoQoS for Enterprise only. • Auto Discovery is enabled on the interface of interest. • Optional trust keyword is used to trust (rely on) the DSCP markings; if unspecified, NBAR will be used. • Default value is untrusted. • Auto Discovery results can be seen with the show auto discovery qos command. router(config-if)# auto discovery qos [trust]

  12. Frame Relay Enabling Auto Discovery Example interface Serial4/0 point-to-point Encapsulation frame-relay Bandwidth 256 Ip address 10.1.71.1 255.255.255.0 Frame-relay interface-dlci 100 auto discovery qos • Auto Discovery: • Command should be enabled on interface of interest. • Do not change interface bandwidth when running Auto Discovery. • Cisco Express Forwarding must be enabled. • All previously attached QoS policies must be removed from the interface. Specify bandwidth, IP address and FR DLCI Enable Auto Discovery

  13. Frame Relay Reviewing the Auto Discovery Generated QoS Policy Statistics show auto discovery qos AutoQoS Discovery enabled for applications Discovery up time: 2 days, 55 minutes AutoQoS Class information: Class VoIP: Recommended Minimum Bandwidth: 517 Kbps/50% (PeakRate) Detected applications and data: Application/ AverageRate PeakRate Total Protocol (kbps/%) (kbps/%) (bytes) rtp audio 76/7 517/50 703104 Class Interactive Video: Recommended Minimum Bandwidth: 24 Kbps/2% (AverageRate) Detected applications and data: Application/ AverageRate PeakRate Total Protocol (kbps/%) (kbps/%) (bytes) rtp video 24/2 5337/52 704574 Class Transactional: Recommended Minimum Bandwidth: 0 Kbps/0% (AverageRate) Detected applications and data: Application/ AverageRate PeakRate Total Protocol (kbps/%) (kbps/%) (bytes) citrix 36/3 74/7 30212 sqlnet 12/1 7/<1 1540

  14. Frame Relay Phase 2: Configuring QoS Policies on Routers • It generates and installs the QoS policy based on the Auto Discovery results (AutoQoS for Enterprise). • The optional voip keyword configures Cisco AutoQoS VoIP. • Optional trust keyword is used to trust (rely on) the DSCP markings for VoIP classification; if unspecified, NBAR will be used. • Default value is untrusted. • Optional fr-atm keyword enables Cisco AutoQoS VoIP for the low-speed Frame Relay-to-ATM links. router(config-if)# auto qos [voip [trust] [fr-atm]]

  15. Cisco AutoQoS for Enterprise: Router Configuration Example 2. Enable Auto Discovery

  16. Configuring Cisco AutoQoS for the Enterprise on a High-Speed Serial Interface • Router>enable • Router#configure terminal • Router(config)#interface serial1/2 • Router(config)# ip address 10.10.100.1 255.255.255.0 • Router(config-if)#bandwidth 1544 • Router(config-if)#auto discovery qos • Router(config-if)#end • Router# Leave Cisco Auto Discovery running, preferably for several days. Router#configure terminal Router(config)#interface serial1/2 Router(config-if)#auto qos Router(config-if)#exit

  17. Deploying Cisco AutoQoS VoIP on Switches • Commands at the interface level configure Cisco AutoQoS VoIP: • Support for Cisco IP phone and Cisco SoftPhone • Support for Cisco SoftPhone currently only on Cisco Catalyst 6500 Series • Trust boundary disabled when Cisco IP phone is moved • Buffer allocation and egress queuing depend on interface type (Gigabit Ethernet or Fast Ethernet). • It is supported on static, dynamic-access, voice VLAN access, and trunk ports. • CDP must be enabled for Cisco AutoQoS VoIP to function properly.

  18. Configuring Cisco AutoQoS on Cisco Catalyst 2960 (EI) and 3560 Switches • Used for trusted connections • Used to trust the ingress VoIP packet marking • Use if the uplink is connected to a trusted switch or router only switch(config-if)# auto qos voip trust switch(config-if)# auto qos voip cisco-phone • Used for Cisco IP Phone connections • Enables the trusted boundary feature • Uses CDP to detect the presence or absence of a Cisco IP Phone • QoS markings of incoming packets are trusted only when the Cisco IP phone is detected

  19. Cisco AutoQoS VoIP Switch Configuration Example Auto Discovery notes: • Command should be enabled on the interface of interest. • Do not change interface bandwidth when running Auto Discovery. • Cisco Express Forwarding must be enabled. • All previously attached QoS policies must be removed from the interface.

  20. How to Verify Cisco AutoQoS on Routers and Switches P r o c e d u r e F l o w

  21. Monitoring Cisco AutoQoS on a Router: Step 1 • Displays the results of the data collected during the Auto Discovery phase for a specific interface or all interfaces router#show auto discovery qos Serial2/1.1 AutoQoS Discovery enabled for applications Discovery up time: 2 hours, 42 minutes AutoQoS Class information: Class Voice: Recommended Minimum Bandwidth: 517 Kbps/50% (PeakRate). Detected applications and data: Application/ AverageRate PeakRate Total Protocol (kbps/%) (kbps/%) (bytes) ----------- ----------- -------- -------- rtp audio 2/<1 517/50 703104 <...rest of the output deleted...> router# show auto discovery qos [interface [interfacetype]]

  22. Monitoring Cisco AutoQoS on a Router: Step 2 • Displays the Cisco AutoQoS templates (policy maps, class maps, and ACLs) created for a specific interface or all interfaces router#show auto qos ! policy-map AutoQoS-Policy-Se2/1.1 class AutoQoS-Voice-Se2/1.1 priority percent 70 set dscp ef class AutoQoS-Inter-Video-Se2/1.1 bandwidth remaining percent 10 set dscp af41 class AutoQoS-Stream-Video-Se2/1.1 bandwidth remaining percent 5 set dscp cs4 class AutoQoS-Transactional-Se2/1.1 bandwidth remaining percent 5 <...rest of the output deleted...> router# show auto qos [interface interfacetype]

  23. Monitoring Cisco AutoQoS on a Router: Step 3 • Displays the packet statistics of all classes that are configured for all service policies on the specified interface, subinterface, or PVC router#show policy-map interface FastEthernet0/0.1 FastEthernet0/0.1 Service-policy output: voice_traffic Class-map: dscp46 (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: ip dscp 46 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target Byte Sustain Excess Interval Increment Adapt Rate Limit bits/int bits/int (ms) (bytes) Active 2500 10000 10000 333 1250 - <...rest of the output deleted...> router# show policy-map interface [interfacetype]

  24. Monitoring Cisco AutoQoS on a Switch: Step 1 • Displays the Cisco AutoQoS VoIP configuration that was initially applied • Does not display any user changes to the configuration that might be in effect switch#show auto qos Initial configuration applied by AutoQoS: wrr-queue bandwidth 20 1 80 0 no wrr-queue cos-map wrr-queue cos 1 0 1 2 4 wrr-queue cos 3 3 6 7 wrr-queue cos 4 5 mls qos map cos-dscp 0 8 16 26 32 46 48 56 ! interface FastEthernet0/3 mls qos trust device cisco-phone mls qos trust cos switch# show auto qos [interface interface-id]

  25. Monitoring Cisco AutoQoS on a Switch: Step 2 • Displays QoS information at the interface level switch#show mls qos interface gigabitethernet0/1 statistics Ingress dscp: incoming no_change classified policed dropped (in bytes) 1 : 0 0 0 0 0 Others: 203216935 24234242 178982693 0 0 Egress dscp: incoming no_change classified policed dropped (in bytes) 1 : 0 n/a n/a 0 0 WRED drop counts: qid thresh1 thresh2 FreeQ 1 : 0 0 1024 2 : 0 0 1024 <...rest of the output omitted...> switch# show mls qos interface [interface-id | vlan vlan-id] [buffers | policers | queueing | statistics]

  26. Monitoring Cisco AutoQoS on a Switch: Step 3 • Displays the maps that are used to generate an internal DSCP value, to represent the priority of the traffic switch#show mls qos maps dscp-cos Dscp-cos map: dscp: 0 8 10 16 18 24 26 32 34 40 46 48 56 ----------------------------------------------- cos: 0 1 1 2 2 3 7 4 4 5 5 7 7 switch# show mls qos maps [cos-dscp | dscp-cos]

  27. Self Check • What is the purpose of Cisco AutoQoS VoIP? • What does the auto qos voip cisco-phone command do? • What command is used to display the data collected during auto discovery?

  28. Summary • Cisco AutoQoS provides the user with a simple, intelligent command-line interface (CLI) for enabling campus LAN and WAN QoS for Voice over IP (VoIP) on Cisco switches and routers. • Using Cisco AutoQoS involves 2 phases: discovery and deployment. • Cisco AutoQoS is supported on many routers and switches.

  29. Q and A

  30. Resources • Cisco AutoQoS Introduction • http://cisco.com/en/US/partner/products/ps6656/products_ios_protocol_option_home.html • Cisco AutoQoS Q&A • http://cisco.com/en/US/partner/tech/tk543/tk759/tk879/technologies_q_and_a_item0900aecd8020a589.shtml

  31. Module 5: Implement Cisco AutoQoS Lesson 5.2: Mitigating Common Cisco AutoQoS Issues

  32. Objectives • Describe common issues with Cisco AutoQoS. • Explain how to interpret AutoQoS generated commands. • Determine when manual modification of AutoQoS commands is necessary. • Describe methods for making manual modifications to AutoQoS generated commands.

  33. Major Enterprise QoS Requirements • Trust boundary definition • Identification of applications, protocols of interest (number of classes), and their QoS requirements • Determination of classification options • Determination of traffic-marking options • Determination of queue mechanisms and optimal parameters per class • Definition of port- and interface-specific transport features • Designation of bandwidth efficiency mechanisms for low-speed links • Identification of efficient alarm and event-monitoring options

  34. DiffServ QoS Mechanisms Enabled by Cisco AutoQoS • DiffServ functions are automated and simplified to expedite deployment of QoS features for voice, video, and data.

  35. Automated Cisco AutoQoS DiffServ Class Provisioning

  36. Common Issues with Cisco AutoQoS

  37. Interpreting Generated Cisco AutoQoS Configuration • Generated Cisco AutoQoS configuration is examined using show auto qos command, answering these questions: • How many classes were identified (class maps)? • Which traffic classification (class map) options were selected? • Which traffic marking options were selected (policy maps)? • Which queuing mechanisms and parameters were designated (policy maps)? • Which other QoS mechanisms were appointed per class (policy maps)? • Were any traffic parameters suggested? • Where was the autogenerated policy applied (interface, DLCI, or PVC)?

  38. How to Interpret the show auto qos Command Output router#show auto qos ! policy-map AutoQoS-Policy-Se2/1.1 class AutoQoS-Voice-Se2/1.1 priority percent 50 set dscp ef class AutoQoS-Inter-Video-Se2/1.1 bandwidth remaining percent 10 set dscp af41 class AutoQoS-Transactional-Se2/1.1 bandwidth remaining percent 5 set dscp af21 <...part of the output deleted...> ! policy-map AutoQoS-Policy-Se2/1.1-Parent class class-default shape average 1024000 service-policy AutoQoS-Policy-Se2/1.1 ! class-map match-any AutoQoS-Voice-Se2/1.1 match protocol rtp audio ! class-map match-any AutoQoS-Transactional-Se2/1.1 match protocol sqlnet <...part of the output deleted...> <...continues on the next slide...> LLQ Class-Based Marking Nested Policy Map(Frame Relay) CBWFQ Parent Policy Map(Frame Relay) Class-Based Shaping NBAR Classification

  39. Frame Relay How to Interpret the show auto qos Command Output (Cont.) • Monitoring Drops in LLQ • Thresholds are activated in RMON alarm table to monitor drops in Voice Class. • The default drop threshold is 1 bps. RMON event generated by AutoQoS Rmon event 33333 log trap AutoQoS description “AutoQoS SNMP traps for Voice Drops” owner AutoQoS Rmon alarm 33350 cbQoSCMDDropBitRate.2881.2991 30 Absolute rising-threshold 1 33333 falling-threshold 0 Owner AutoQoS

  40. How to Interpret the show auto qos Command Output (Cont.) rmon event 33333 log trap AutoQoS description "AutoQoS SNMP traps for Voice Drops" owner AutoQoS Serial2/1.1: DLCI 58 - ! interface Serial2/1.1 point-to-point frame-relay interface-dlci 58 class AutoQoS-FR-Serial2/1-58 ! map-class frame-relay AutoQoS-FR-Serial2/1-58 frame-relay cir 1024000 frame-relay bc 10240 frame-relay be 0 frame-relay mincir 1024000 service-policy output AutoQoS-Policy-Se2/1.1-Parent RMON Traps for Voice Packet Drops Applying all to the DLCI (or Policy Map to the Serial in Non-Frame Relay) Frame Relay Traffic Parameters

  41. When Is Manual Modification ofAutoQoS Configuration Required?

  42. NBAR and ACL Classification • Cisco AutoQoS uses NBAR and ACLs to generate classifications • Any MQC classification mechanism can manually tune the generated classification: • Start the Auto Discovery and review the generated results (or take the active classification if Cisco AutoQoS is already activated). • Copy the generated classification and modify it offline. • Apply the modified classification to a router. class-map match-any AutoQoS-Voice-Se2/1.1 match protocol rtp audio ! class-map match-any AutoQoS-Signaling-Se2/1.1 match access-group 101 match protocol rtcp ! class-map match-any AutoQoS-Transactional-Se2/1.1 match protocol sqlnet match protocol citrix ! access-list 101 permit tcp any any eq 1719 access-list 101 permit tcp any any eq 1720 access-list 101 permit udp any any eq 2427 access-list 101 permit udp any any eq 2428 H.323 MGCP

  43. MCQ Classification Options • Besides NBAR and ACLs, these major MQC classification options can be used for tuning. • These classification options can be used in any combination as needed to meet specific classification requirements. router(config-cmap)# match input-interface interface-name match cos cos-value [cos-valuecos-valuecos-value] match ip precedence ip-prec-value [ip-prec ...] match ip dscp ip-dscp-value [ip-dscp-value ...] match ip rtp starting-port-numberport-range

  44. Self Check • What are some common issues when using Cisco AutoQoS to generate enterprise policies? • When is manual Modification of AutoQoS configuration required?

  45. Summary • Cisco AutoQoS automates QoS deployment for the most common enterprise scenarios and enables several Cisco IOS QoS mechanisms to meet the QoS requirements of various applications and traffic types discovered in the enterprise network. • Cisco AutoQoS automatically provisions six QoS mechanisms using DiffServ technology: Classification, Marking, Congestion Management, Shaping, Congestion Avoidance, and Link Efficiency. • Although Cisco AutoQoS automates QoS deployment, it targets only the most common enterprise network scenarios. The QoS classes and templates that Cisco AutoQoS generates will not suit every network requirement.

  46. Q and A

  47. Resources • Cisco AutoQoS Introduction • http://cisco.com/en/US/partner/products/ps6656/products_ios_protocol_option_home.html • Cisco AutoQoS Q&A • http://cisco.com/en/US/partner/tech/tk543/tk759/tk879/technologies_q_and_a_item0900aecd8020a589.shtml

More Related