Residential Surveyor Brisbane

1. Most Common Surveying Techniques buzzfeed.com/geosurv03/most-common-surveying-techniques-6adpo2vhgz Whether you are adding an extension to an existing structure or building a new one, the smooth process and success of any building project start with surveying. A land surveyor, Brisbane-based or otherwise, measures and maps out a property’s boundaries and features. The data they provide is critical to the project. On that, there are several methods and techniques used by land surveyors to ensure accurate data is produced. Discussed below are five of the most used ones. Triangulation Triangulation is perhaps the most popular technique used. Brisbane surveyors measure and trace what is called the baseline along with two interior angles in triangulation. This technique is known to be the most efficient as it greatly helps in reducing the number of calculations needed to be done, with the use of the measured length of just one side and trigonometry. Advertisement Trilateration Trilateration is a surveying technique that relies on distance measurements only. Used as an alternative for triangulation, Brisbane surveyors use electronic distance measurement technologies for this technique which makes it cost-effective for conducting control surveys. It is also commonly preferred when surveying properties that are located in the rough terrains. Levelling Levelling is a surveying technique that deals with the difference in elevation of a property. Used in site surveying, Brisbane surveyors apply this technique to calculate land elevations. This is done by measuring the distance vertically, with the use of a levelling instrument. On this, there are several kinds of levelling tools that surveyors use with the most common being Theodolites, transits, and dumpy levels. Traverse In the traverse surveying technique, there are a series or sequence of lines that need to be measured, with those lines representing the lengths and distances of the determined points. These points are in specific locations. Traverse lines can be open or closed and may also be adjusted by Brisbane surveyors as needed. This technique is usually used when surveying new roads. Radiation Radiation is a technique that most Brisbane surveyors apply together with traverse and triangulation. In radiation, a fixed position above the location of the area being surveyed is taken. From this fixed position, various points are noted. Surveyors then draw these on a piece of paper. Afterwards, the distance is measured and translated to the corresponding scale required by the survey sheet. 1/2

2. Final Thoughts Again, there are other surveying techniques but the five above are the most common ones used by a land surveyor. Brisbane surveying firms utilise these techniques to make sure precise data is produced. Without the right data, engineers and architects will not be able to perform their work properly. And if construction is poorly done, the safety and accessibility of the structure cannot be assured by a building surveyor Brisbane based or otherwise, causing delays to the project. Hence, conducting a land survey is truly a necessity to ensure the success of any development or construction project. And on that, it is important to hire the services of only reliable surveying firms like Geosurv who are experts in the field and offer different types of surveying services. 2/2