1 / 1

Transmissibility of Halcyonics MOD-2 active vibration isolation system

Transmissibility of Halcyonics MOD-2 active vibration isolation system. Measured by Curt Preissner on Jan. 26 th , 2011 System is on 8IDE optical table with LB trough and xy , z stages loaded. Use environmental vibrations. Transmissibility from floor to sensor on table .

gerek
Download Presentation

Transmissibility of Halcyonics MOD-2 active vibration isolation system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Transmissibility of Halcyonics MOD-2 active vibration isolation system • Measured by Curt Preissner on Jan. 26th, 2011 • System is on 8IDE optical table with LB trough and xy, z stages loaded. • Use environmental vibrations. • Transmissibility from floor to sensor on table. • Cannot reproduce the transmissibility curve on the manual (may need to use vibration generator) • System seems to work properly. • System is supposed to work better for high frequencies • System should always be switched on. The transmissibility is higher than 1 at some low frequency range. Therefore, system off is worse than no system especially at low frequencies.

More Related