1 / 7

Jaeseok (“Jae”) Jeon Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkel

O’Dwyer, C. et al . Bottom-up growth of fully transparent contact layers of indium tin oxide nanowires for light emitting devices. Nature Nanotech. 4, 239 – 244 (2009). Jaeseok (“Jae”) Jeon Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley

geri
Download Presentation

Jaeseok (“Jae”) Jeon Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. O’Dwyer, C. et al. Bottom-up growth of fully transparent contact layers of indium tin oxide nanowires for light emitting devices. Nature Nanotech. 4, 239 – 244 (2009). Jaeseok (“Jae”) Jeon Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkeley, California 94720-1774 Monday, April 27, 2009

  2. Indium Tin Oxide (ITO) • Indium Tin Oxide (ITO); versatile material used in various applications » Strong ultraviolet absorption ⇒ higher efficiency solar cells » High visible and near-infrared transmission⇒ transparent contact electrodes for light-emitting devices (LEDs) » High far-infrared reflectivity ⇒ anti-reflection coatings » Strong microwave attenuation ⇒ radiation protection • In the visible and near-infrared wavelength regime; » Trade-off between optical transparency and electrical conductivity for ITO and even other transparent, conductive oxides » Optically transparent, but highly resistive contact electrodes for LEDs • To overcome the trade-off, ITO nanowires bottom-up grown using custom-developed Molecular Beam Epitaxy (MBE)

  3. Big-picture view of ITO nanowire growth • MBE is one of the widely used methods of depositing epitaxial films • ITO nanowire growth; Indium (In) and Tin (Sn) as precursors in O2 In and Sn heated in separate effusion cells In and Sn slowly sublimated (evaporated) gas-phase In and Sn condensed on substrate Typical MBE system In and Sn react with each other, forming ITO nanowires

  4. Atomistic view of ITO nanowire growth I • Entire process in a single step » Seeding → nucleation → growth → progressive branch seeding and growth » No heterogeneous catalysts needed Cross-sectional SEM image of ITO nanowire with seed crystal FIB milled SEM image of oxidized In-Sn droplet seed crystals, MBE deposition conditions: Tsub = 400 °C, TIn = 835 °C, TSn = 1000 °C, 0.1 nm/sec, In:Sn = 10:90, scale bar = 100nm Seeds crystal nucleated, and non-tapered ITO nanowires precipitatively grown and homogeneously branched, scale bar =50 nm

  5. Atomistic view of ITO nanowire growth II Morphological variations High-quality, defect-free single-crystal nanowires formed at high deposition rates SEM images of 100 to 25nm thick ITO nanowires Porous nanowires created at lower deposition rates Cross-sectional SEM images of 8 to 50 nm long ITO nanowires, MBE deposition conditions: Tsub = 400 °C, TIn = 835 °C, TSn = 1000 °C, 0.1 nm/sec, In:Sn = 10:90, scale bar = 200 nm SEM images of 100 to 300 nm thick ITO nanowires showing increased surface roughness and internal porosity

  6. Atomistic view of ITO nanowire growth III SEM images of ITO nanowires showing the overall long-range growth uniformity, cross-sectional diameters of ITO nanowires = 10 – 15 nm, scale bar on the first image = 1 um

  7. ITO nanowires: optical and electrical characteristics As-deposited nanowires showing a linear I-V characteristic ⇒ no need for forming gas anneal or metal interlayer to offset high contact resistance Effect of ITO nanowire morphology on optical transmission; transparency in the visible wavelength regime improved to ~ 90 % with increasing growth rate up to 0.2 nm/sec Transmission measurements of ITO nanowires, MBE deposition conditions: Tsub = 575 °C (red curve), Tsub = 450 °C (green curve)

More Related