1 / 9

HT-7

HT-7. FY08_ HT-7 实验物理报告. 物理三组 2008.4.7. HT-7. ECEI: The toroidal mode number ECE calibration with the high toroidal field The plasma current ramp up and ramp down for the LFCS control. HT-7. 利用与 ece02 的环向相关 , q=1 面内 , 对应极向模数 m=1, 2 的环向模数 n 分别为 0.8 和 1.5 与预期的 n=1,2 的误差 , 可能与相移有关.

giles
Download Presentation

HT-7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HT-7 FY08_HT-7 实验物理报告 物理三组 2008.4.7

  2. HT-7 • ECEI:Thetoroidalmodenumber • ECE calibration with the high toroidal field • The plasma current ramp up and ramp down for the LFCS control

  3. HT-7 • 利用与ece02的环向相关, q=1面内,对应极向模数m=1, 2的环向模数n分别为0.8和1.5 • 与预期的n=1,2的误差,可能与相移有关

  4. HT-7 • 由于反馈控制的原因,密度没有达到4.5以上的要求 • 尝试密度达到5.0以上,重复了双模的现象.

  5. HT-7 ne = 5.0

  6. 上轮实验的结果 ne=4.5

  7. HT-7

  8. HT-7

  9. 本轮实验两次定标相邻道比值之间的关系（LowFieldBranch）本轮实验两次定标相邻道比值之间的关系（LowFieldBranch） HT-7

More Related