640 likes | 999 Views
Chapter 6 Estimates and Sample Sizes. 6-1 Estimating a Population Mean: Large Samples / σ Known 6-2 Estimating a Population Mean: Small Samples / σ Unknown 6-3 Estimating a Population Proportion 6-4 Estimating a Population Variance: Will cover with chapter 8. Overview.
E N D
Chapter 6Estimates and Sample Sizes • 6-1 Estimating a Population Mean: Large Samples / σ Known • 6-2 Estimating a Population Mean: Small Samples / σ Unknown 6-3 Estimating a Population Proportion 6-4 Estimating a Population Variance: Will cover with chapter 8
Overview This chapter presents: • Methods for estimating population means and proportions • Methods for determining sample sizes
6-1 Estimating a Population Mean: Large Samples / σ Known
Assumptions • Large Sample is defined as samples with n > 30 and σ known. • Data collected carelessly can be absolutely worthless, even if the sample is quite large.
Definitions • Estimator a formula or process for using sample data to estimate a population parameter • Estimate a specific value or range of values used to approximate some population parameter • Point Estimate a single value (or point) used to approximate a population parameter The sample mean x is the best point estimate of the population mean µ.
Definition Confidence Interval (or Interval Estimate) a range (or an interval) of values used to estimate the true value of the population parameter Lower # < population parameter < Upper # As an example Lower # < < Upper #
Definition Why Confidence Intervals A couple of points • Even though x is the best estimate for and s is the best estimate for they do not give us an indication of how good they are. • A confidence interval gives us a range of values based on • variation of the sample data • How accurate we want to be • The width of the range of values gives us an indication of how good the estimate is. • The width is called the Margin of Error (E). We will discuss how to calculate this later.
Definition Degree of Confidence (level of confidence or confidence coefficient) • Proportion of times that the confidence interval actual contains the population parameter • Degree of Confidence = 1 - • often expressed as a percentage value usually 90%, 95%, or 99% So ( = 10%), ( = 5%), ( = 1%)
Interpreting a Confidence Interval 98.08o <µ < 98.32o Let: 1 - = .95 Correct: we are 95% confident that the interval from 98.08 to 98.32 actually does contain the true value of . This means that if we were to select many different samples of sufficient size and construct the confidence intervals, 95% of them would actually contain the value of the population mean . Wrong: There is a 95% chance that the true value of will fall between 98.08 and 98.32. (there is no way to calculate the probability for a population parameter only a sample statistic)
Confidence Intervals from 20 Different Samples Simulations http://www.ruf.rice.edu/~lane/stat_sim/conf_interval/index.html
Definition Critical Value The number on the borderline separating sample statistics that are likely to occur from those that are unlikely to occur. The number z/2is a critical value that is a zscore with the property that it separates an area /2in the right tail of the standard normal distribution. ENGLISH PLEASE!!!!
The Critical Value z2 2 2 z2 -z2 z=0 Found from calculator
Finding z2for 95% Degree of Confidence 95% = 5% 2 = 2.5% = .025 .95 .025 .025 z2 -z2 Critical Values
Finding z2for 95% Degree of Confidence = 0.05 = 0.025 .025 Use calculator to find a z score of 1.96 z2 = 1.96 .025 .025 - 1.96 1.96
Finding z2for other Degrees of Confidence Examples: 1 - 1 - 1 - 1 - 1 - (will use on test for ease of calculation) Find critical value and sketch
Definition Margin of Error is the maximum likely difference observed between sample mean x and true population mean μ. denoted by E μ upper limit lower limit
E = z/2 • n Confidence Interval (or Interval Estimate) for Population Mean µ(Based on Large Samples: n >30) x - E < µ < x + E Where
When can we use zα/2? • If n> 30 and we know • If n 30, the population must have a normal distribution and we must know . • Knowing is largely unrealistic.
Round-Off Rule for Confidence Intervals Used to Estimate µ 1. When using the original set of data, round the confidence interval limits to one more decimal place than used in original set of data. 2. When the original set of data is unknown and only the summary statistics (n, x, s)are used, round the confidence interval limits to the same number of decimal places used for the sample mean.
Example: A study found the starting salaries of 100 college graduates who have taken a statistics course. The sample mean was $43,704 and the sample standard deviation was $9,879. Find the margin of error E and the 95% confidence interval. n = 100 x = 43704 σ = 9879 = 0.95 = 0.05 /2 = 0.025 z/ 2= 1.96 E = z/ 2• = 1.96 • 9879 = 1936.3 n 100 x - E < < x + E 43704 - 1936.3 <<43704 + 1936.3 $41,768 << $45,640 Based on the sample provided, we are 95% confident the population (true) mean of starting salaries is between 41,768 & 45,640.
TI-83 Calculator Finding Confidence intervals using z • Press STAT • Cursor to TESTS • Choose ZInterval • Choose Input: STATS* • Enter σ and x and confidence level • Cursor to calculate *If your input is raw data, then input your raw data in L1 then use DATA
Width of Confidence Intervals Test Question What happens to the width of confidence intervals with changing confidence levels?
Finding the Point Estimate and E from a Confidence Interval Point estimate of x: x =(upper confidence interval limit) + (lower confidence interval limit) 2 Margin of Error: E = (upper confidence interval limit) - x
Example Find x and E • 26 < µ < 40 x = (40 + 26) / 2 = 33 E = 40 - 33 = 7 Use for #4 on hw
z E = / 2 • n Sample Size for Estimating Mean (solve for n by algebra) 2 z / 2 n = E z/2 = critical z score based on the desired degree of confidence E = desired margin of error = population standard deviation
Example:If we want to estimate the mean weight of plastic discarded by households in one week, how many households must be randomly selected to be 99% confident that the sample mean is within 0.25 lb of the true population mean? (A previous study indicates the standard deviation is 1.065 lb.) 2 2 n = z = (2.575)(1.065) = 0.01 z = 2.575 E = 0.25 σ = 1.065 E 0.25 = 120.3 = 121 households If n is not a whole number, round it upto the next higher whole number.
Example:If we want to estimate the mean weight of plastic discarded by households in one week, how many households must be randomly selected to be 99% confident that the sample mean is within 0.25 lb of the true population mean? (A previous study indicates the standard deviation is 1.065 lb.) 2 2 n = z = (2.575)(1.065) = 0.01 z = 2.575 E = 0.25 σ = 1.065 E 0.25 = 120.3 = 121 households We would need to randomly select 121 households to be 99% confident that this mean is within 1/4 lb of the population mean.
Example:How large will the sample have to be if we want to decrease the margin of error from 0.25 to 0.2? Would you expect it to be larger or smaller? 2 2 n = z = (2.575)(1.065) = 0.01 z = 2.575 E = 0.20 σ = 1.065 E 0.2 = 188.01 = 189 households We would need to randomly select a larger sample because we require a smaller margin of error.
What happens when E is doubled ? 2 (z ) 2 z / 2 / 2 n = = 1 1 2 (z ) 2 z / 2 / 2 n = = 4 2 E = 1 : E = 2 : • Sample size nis decreased to 1/4 of its original value if E is doubled. • Larger errors allow smaller samples. • Smaller errors require larger samples.
Class Assignment • Use OLDFAITHFUL Data in Datasets File • Construct a 95% and 90% confidence interval for the mean eruption duration. Write a conclusion for the 95% interval. Assume σ to be 58 seconds • Compare the 2 confidence intervals. What can you conclude? • How large a sample must you choose to be 99% confident the sample mean eruption duration is within 10 seconds of the true mean Guidelines: • Choose a partner • Suggest having one person working the calculator and one writing • Due at the end of class (5 HW points) • Each person must turn in a paper
6-2 Estimating a Population Mean: Small Samples / σ Unknown
Small SamplesAssumptions • n 30 • The sample is a random sample. • The sample is from a normally distributed population. Case 1 ( is known): Largely unrealistic; Case 2 (is unknown): Use Student t distribution if normal ; if n is very large use z
Determining which distribution to use Case 1 ( is known): Case 2 (is unknown):
Determining which distribution to use • n = 150 ; x = 100 ; s = 15 skewed distribution • n = 8 ; x = 100 ; s = 15 normal distribution • n = 8 ; x = 100 ; s = 15 skewed distribution • n = 150 ; x = 100 ; σ = 15 skewed distribution • n = 8 ; x = 100 ; σ = 15 skewed distribution
Important Facts about the Student t Distribution • Developed by William S. Gosset in 1908 • Density function is complex • Shape is determined by “n” • Has the same general symmetric bell shape as the normal distribution but it reflects the greater variability (with wider distributions) that is expected with small samples. • The Student t distribution has a mean of t = 0, but the standard deviation varies with the sample size and is always greater than 1 • Is essentially the normal distribution for large n. For values of n > 30, the differences are so small that we can use the critical z or t value.
Student t Distributions for n = 3 and n = 12 Student t distribution with n = 12 Standard normal distribution Student t distribution with n = 3 0 Greater variability than standard normal due to small sample size
Student t Distribution If the distribution of a population is essentially normal, then the distribution of x - µ t = s n t/ 2 • critical values denoted by
Book Definition Degrees of Freedom (df ) Corresponds to the number of sample values that can vary after certain restrictions have imposed on all data values. This doesn’t help me, how about you?
Definition Degrees of Freedom (df ) In general, the degrees of freedom of an estimate is equal to the number of independent scores (n) that go into the estimate minus the number of parameters estimated. In this section df = n - 1 because we are estimating with x
Table A-3 / Calculators / Excel • Table from website • TI – 84 (only) • Excel function (tinv)
Table A-3 t Distribution .005 (one tail) .01 (two tails) .01 (one tail) .02 (two tails) .025 (one tail) .05 (two tails) .05 (one tail) .10 (two tails) .10 (one tail) .20 (two tails) .25 (one tail) .50 (two tails) Degrees of freedom 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Large (z) 63.657 9.925 5.841 4.604 4.032 3.707 3.500 3.355 3.250 3.169 3.106 3.054 3.012 2.977 2.947 2.921 2.898 2.878 2.861 2.845 2.831 2.819 2.807 2.797 2.787 2.779 2.771 2.763 2.756 2.575 31.821 6.965 4.541 3.747 3.365 3.143 2.998 2.896 2.821 2.764 2.718 2.681 2.650 2.625 2.602 2.584 2.567 2.552 2.540 2.528 2.518 2.508 2.500 2.492 2.485 2.479 2.473 2.467 2.462 2.327 12.706 4.303 3.182 2.776 2.571 2.447 2.365 2.306 2.262 2.228 2.201 2.179 2.160 2.145 2.132 2.120 2.110 2.101 2.093 2.086 2.080 2.074 2.069 2.064 2.060 2.056 2.052 2.048 2.045 1.960 6.314 2.920 2.353 2.132 2.015 1.943 1.895 1.860 1.833 1.812 1.796 1.782 1.771 1.761 1.753 1.746 1.740 1.734 1.729 1.725 1.721 1.717 1.714 1.711 1.708 1.706 1.703 1.701 1.699 1.645 3.078 1.886 1.638 1.533 1.476 1.440 1.415 1.397 1.383 1.372 1.363 1.356 1.350 1.345 1.341 1.337 1.333 1.330 1.328 1.325 1.323 1.321 1.320 1.318 1.316 1.315 1.314 1.313 1.311 1.282 1.000 .816 .765 .741 .727 .718 .711 .706 .703 .700 .697 .696 .694 .692 .691 .690 .689 .688 .688 .687 .686 .686 .685 .685 .684 .684 .684 .683 .683 .675
Critical z Value vs Critical t Values See “t distribution pdf.xls”
Finding t2for the following Degrees of Confidence and sample size Examples: 1 - n = 12 1 - n = 15 1 - n = 9 1 - n = 20 Find critical value and sketch
Confidence Interval for the Estimate of µBased on an Unknown and a Small Simple Random Sample from a Normally Distributed Population x - E < µ < x + E s E = t/2 where n t/2 found in Table A-3
Example: Let’s do an example comparing z and t. Construct confidence interval’s for each using the following data. n = 16 x = 50 s = 20 = 0.05 /2 = 0.025 Now we wouldn’t use a z distribution here due to the small sample but let’s do it anyway and compare the width of the confidence interval to a confidence interval created using a t distribution
x - E < µ < x + E Example: A study of 12 Dodge Vipers involved in collisions resulted in repairs averaging $26,227 and a standard deviation of $15,873. Find the 95% interval estimate of , the mean repair cost for all Dodge Vipers involved in collisions. (The 12 cars’ distribution appears to be bell-shaped.) E = t2 s =(2.201)(15,873) = 10,085.3 x = 26,227 s = 15,873 = 0.05 /2 = 0.025 t/2 = 2.201 n 12 26,227 - 10,085.3 < µ < 26,227 + 10,085.3 $16,141.7< µ < $36,312.3 We are 95% confident that this interval contains the average cost of repairing a Dodge Viper.
TI-83 Calculator Finding Confidence intervals using t • Press STAT • Cursor to TESTS • Choose TInterval • Choose Input: STATS* • Enter s and x and confidence level • Cursor to calculate *If your input is raw data, then input your raw data in L1 then use DATA
Table A-3 t Distribution .005 (one tail) .01 (two tails) .01 (one tail) .02 (two tails) .025 (one tail) .05 (two tails) .05 (one tail) .10 (two tails) .10 (one tail) .20 (two tails) .25 (one tail) .50 (two tails) Degrees of freedom 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Large (z) 63.657 9.925 5.841 4.604 4.032 3.707 3.500 3.355 3.250 3.169 3.106 3.054 3.012 2.977 2.947 2.921 2.898 2.878 2.861 2.845 2.831 2.819 2.807 2.797 2.787 2.779 2.771 2.763 2.756 2.575 31.821 6.965 4.541 3.747 3.365 3.143 2.998 2.896 2.821 2.764 2.718 2.681 2.650 2.625 2.602 2.584 2.567 2.552 2.540 2.528 2.518 2.508 2.500 2.492 2.485 2.479 2.473 2.467 2.462 2.327 12.706 4.303 3.182 2.776 2.571 2.447 2.365 2.306 2.262 2.228 2.201 2.179 2.160 2.145 2.132 2.120 2.110 2.101 2.093 2.086 2.080 2.074 2.069 2.064 2.060 2.056 2.052 2.048 2.045 1.960 6.314 2.920 2.353 2.132 2.015 1.943 1.895 1.860 1.833 1.812 1.796 1.782 1.771 1.761 1.753 1.746 1.740 1.734 1.729 1.725 1.721 1.717 1.714 1.711 1.708 1.706 1.703 1.701 1.699 1.645 3.078 1.886 1.638 1.533 1.476 1.440 1.415 1.397 1.383 1.372 1.363 1.356 1.350 1.345 1.341 1.337 1.333 1.330 1.328 1.325 1.323 1.321 1.320 1.318 1.316 1.315 1.314 1.313 1.311 1.282 1.000 .816 .765 .741 .727 .718 .711 .706 .703 .700 .697 .696 .694 .692 .691 .690 .689 .688 .688 .687 .686 .686 .685 .685 .684 .684 .684 .683 .683 .675
6-3 Estimating a population proportion