Common Installation Problems with Avg.com/retail

1. Common Installation Problems with Avg.com/retail AVG antivirus products are the most reliable and dependable security solutions across the world. However, like other security solutions, AVG antivirus programs have their share of problems too. This article discusses some of the common AVG installation problems and their solutions. These include AVG antivirus software validation failure, unsuccessful installation, missing file, system hangs during the procedure, and update problems or Common Update Error after installation among others. Check the below mentioned free AVG installation support guide for tips on troubleshooting the installation problems. www.avg.com/retail Instructions:

2. Make sure that you log in as an administrator to your computer. Download and install the latest updates for your Windows computer before installing a AVG product. Also, make sure that you eradicate your existing security software (if you are running one on your PC) before installing the software. Remember, two security programs always conflict with each other and may cause your computer to hang other than making each other inoperable Firewall often creates problems during the installation. So, if you are running a firewall program like Zone Alarm, turn it off. You can turn it back on after installation. Do not forget to configure your firewall program to allow the AVG software to run properly. Besides, always check whether your computer meets the minimum system requirements to install AVG or not. It helps you avoid facing AVG installation problems during the installation procedure via avg.com/retail. If the crashes making your computer freeze after launching the Mc Shield service, use this method. Reboot your computer in Safe Mode. When the computer starts, immediately start tapping the F8 key. Keep critical the key until you see the boot menu. Select Safe Mode and hit the Enter key. When done, click the Start button and select Run. Type ‘msconfig’ (without quotes) in the Open field and hit Enter again. When in System Configuration efficacy, click the Services tab. disable AVG Framework Service, Network Associates Mc Shield, and Network Associates Task Manager by deselecting the boxes next to them. Click the OK button and restart your computer.

3. Now open your web browser and visit the AVG website www.avg.com/retail. Look for the latest patch file (update) for your AVG version and download it. Save and run the file. When done, open the Run utility again and run the ‘msconfig’ command. Click the common tab in the System Configuration Utility window. Click the button then to Normal Startup – load all device drivers and services. Click the Apply button and next OK to save the changes and close the window. When pressed, confirm the action and reboot your PC. If you get a Common Update Error message after installing AVG antivirus at avg.com/retail, it indicates that the installation is damaged due to a newly installed update. Uninstall AVG antivirus completely from your computer. Go to Add or Remove Programs in Control Panel, select the AVG Security Center or Enterprise (whatever your product’s name is) and click the Change/Remove button. When prompted, confirm the action. Select the components that you want to remove and hit the Remove button. Wait for the process to finish. When done, reboot your computer. When done, insert your AVG antivirus setup disk in the disk drive and wait for the automatic prompt to appear. Follow the on-display prompts as you did previously, but cautiously and finish the installation. Make sure that you enter each and every piece of information correctly wherever required. Select your custom features and configure the settings. When done, reboot your computer and get going. Extra Info:

4. In case you continue to face problems during the AVG install, contact AVG technical support or AVG product support. avg.com/registration #www.office.com/setup #www.webroot.com/safe #www.mcafee.com/activate