250 likes | 392 Views
In Vehicle Camera WIFI Adapter Setup (listen OR read along) For Additional Help: Call 888-286-9829 or E-mail info@safetytrack.net or Visit www.safetytrack.net/camera-wifi-setup. Contents. ** Pay close attention to slides 18-20. These steps must be followed
E N D
In Vehicle Camera WIFI Adapter Setup (listen OR read along) For Additional Help: Call 888-286-9829 or E-mail info@safetytrack.net or Visit www.safetytrack.net/camera-wifi-setup
Contents ** Pay close attention to slides 18-20. These steps must be followed precisely or your WIFI adapter will not work properly. Slides 3-5: Features 6-8: How the Camera Works 9-14: Configuring Server 15-17: Configuring Camera Viewer Software 18-20: Configuring WIFI Adapter Settings 21-23: Configuring Janus Search Software 24-25: Troubleshooting
Safety Track’s In Vehicle Camera • Small Compact Design • Impact Resistant Plastic • Windshield Mount Design • Locking Security Bracket • Customizable Profile • 5 Event Settings • Events can’t be over written • Up to 32GB SD Card • 90 Hours of Record Time • Night Vision Recording
Features Install camera to the right of the rear view mirror. If your vehicle does not have a rear view mirror, place the camera in a similar position so the front camera can view outward, and the rear camera can view the vehicle’s cabin.
WIFI Adaptor Components: 1: Camera 2: WIFI Adapter 3: Cable and WIFI Connector 1 2 3 With the optional WIFI Adaptor, you can have wireless downloading of data.
WIFI Diagram Data travels from the camera, to the WIFI Adapter, and wirelessly transmits to your computer through its’ router Camera powers WIFI adapter WirelessUSB USB Cable Data Flow Power Flow
Server & Client Configuration FTP Server -or- Customer Computer Wireless Router Wired Connection Wireless Connections Vehicle 1 Vehicle 2 Vehicle 3 Vehicle 4 Vehicle 5 Vehicle 6 An infinite number of vehicles can be configured to transmit through a single router.
Typical Download Scenario Once WIFI adapter is installed, vehicle must be at rest for 3 minutes within WIFI router range to download camera data.
Configuration/Installation We will now begin installing and configuring the camera’s programs and server from your computer. Slides 10-13: Configuring Server 14-17: Configuring Camera Viewer Software 18-21: Configuring WIFI Adapter Settings 22-24: Configuring Janus Search Software
Create New Folder in Program Files Name the folder whatever you’d prefer Create a ‘New Folder’ in your program files folder located on your C: drive (you may name this folder anything you like). This folder is where your camera files will be saved.
Go to: www.safetytrack.net/zftp.exe Download ZFTP Server Go to www.safetytrack.net/zftp.exe to download and install ZFTP Server Suite. Double click the downloaded file or press ‘ Run ’ and proceed to the next slide for installation instructions.
Installing ZFTP Server Step 1: Agree to the Terms Step 2: Check to installzFTP Server andzFTP Server administration Step 3: Create an administrationpassword and remember thepassword as it will be needed infuture steps
ZFTP Server(Set up) Once the ZFTP Server is installed, open the program. Enter the username ‘Admin’ and the password you chose from the previous slide. Once opened, click ‘Setup’, then click ‘Accounts’.
ZFTP Server User Settings Click ‘Users’, then click ‘Admin’. Next, Click ‘AddResource’ and locate the folderyou created inProgram Files. Check all of theboxes underFiles andDirectories Check all Boxes
www.safetytrack.net/support/installationViewer Download Go to www.safetytrack.net/downloadviewer.exe to download the Camera Viewing Software. When the installation is complete, open the Camera Viewing Software.
Vehicle Information Click ‘User Settings’ Fill in information Under the ‘Car Info’ tab.
Find Your IP Address (Command prompt) Click the ‘Start Menu’ in the lower left of yourcomputerClick ‘Run’ andtype in ‘cmd’ (if you’re using windows 7, click the ‘Start Menu’ and type ‘cmd’ in the search box.) When the Command Prompt opens, type in‘ipconfig’ to find your IP address. (sample IP address, yours will be different) **Write down/save your IP address number**
WIFI Set Up While still in the camera setup menu, click ‘Wireless’. Enter your ZFTP UserID (which is probably ‘Admin’) and the ZFTP password we set up earlier. Enter your computer’s IP Address
Wireless Router Info Enter your router’s name and password/key. (configured when you set up your router, the same name/password other wireless devices use) Set the ‘Auth Mode’ to ‘WPAPSK’ Set the ‘Encryp Type’ to ‘AES’ Press ‘OK’ to save settings
www.safetytrack.net/support/installationJanus Search Download Go to www.safetytrack.net/support/installation Click ‘Janus Search File’ and follow the download and installation instructions.
Janus Search Software After installation, open the Janus Search Software Upon opening, point the software to the new folder we created in your Program Files folder The Janus Search Software will organize these data files so they may be located with ease
Data Management Software Example of how the software should look after loading files