1 / 21

Chapter 13: Wireless Networks

Chapter 13: Wireless Networks. Business Data Communications, 4e. Reasons for Wireless Networks. Mobile communication is needed. Communication must take place in a terrain that makes wired communication difficult or impossible. A communication system must be deployed quickly.

greenrobert
Download Presentation

Chapter 13: Wireless Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 13:Wireless Networks Business Data Communications, 4e

  2. Reasons for Wireless Networks • Mobile communication is needed. • Communication must take place in a terrain that makes wired communication difficult or impossible. • A communication system must be deployed quickly. • Communication facilities must be installed at low initial cost. • The same information must be broadcast to many locations.

  3. Problems with Wireless Networks • Operates in a less controlled environment, so is more susceptible to interference, signal loss, noise, and eavesdropping. • Generally, wireless facilities have lower data rates than guided facilities. • Frequencies can be more easily reused with guided media than with wireless media.

  4. Mobile Telephony • First Generation • analog voice communication using frequency modulation. • Second Generation • digital techniques and time-division multiple access (TDMA) or code-division multiple access (CDMA) • Third Generation • evolving from second-generation wireless systems • will integrate services into one set of standards.

  5. Advanced Mobile Phone Service

  6. AMPS Components • Mobile Units • contains a modem that can switch between many frequencies • 3 identification numbers: electronic serial number, system ID number, mobile ID number • Base Transceiver • full-duplex communication with the mobile • Mobile Switching Center

  7. Global System for Mobile Communication • Developed to provide common 2nd-generation technology for Europe • 200 million customers worldwide, almost 5 million in the North America • GSM transmission is encrypted • Spectral allocation: 25 MHz for base transmission (935–960 MHz), 25 MHz for mobile transmission (890–915 MHz)

  8. GSM Layout

  9. Multiple Access • Four ways to divide the spectrum among active users • frequency-division multiplexing (FDM) • time-division multiplexing (TDM) • code-division multiplexing (CDM) • space-division multiplexing (SDM)

  10. Choice of Access Methods • FDM, used in 1st generation systems, wastes spectrum • Debate over TDMA vs CDMA for 2nd generation • TDMA advocates argue there is more successful experience with TDMA. • CDMA proponents argue that CDMA offers additional features as well, such as increased range. • TDMA systems have achieved an early lead in actual implementations • CDMA seems to be the access method of choice for third-generation systems

  11. Third Generation Systems • Intended to provide provide high speed wireless communications for multimedia, data, and video • Personal communications services (PCSs) and personal communication networks (PCNs) are objectives for third-generation wireless. • Planned technology is digital using TDMA or CDMA to provide efficient spectrum use and high capacity

  12. Wireless Application Protocol (WAP) • Programming model based on the WWW Programming Model • Wireless Markup Language, adhering to XML • Specification of a small browser suitable for a mobile, wireless terminal • A lightweight communications protocol stack • A framework for wireless telephony applications (WTAs)

  13. WAP Programming Model

  14. WAP Protocol Stack

  15. Wireless Telephony Applications:A Sample Configuration

  16. Geostationary Satellites • Circular orbit 35,838 km above the earth’s surface • rotates in the equatorial plane of the earth at exactly the same angular speed as the earth • will remain above the same spot on the equator as the earth rotates.

  17. Advantages of Geostationary Orbits • Satellite is stationary relative to the earth, so no frequency changes due to the relative motion of the satellite and antennas on earth (Doppler effect). • Tracking of the satellite by its earth stations is simplified. • One satellite can communicate with roughly a fourth of the earth; three satellites separated by 120° cover most of the inhabited portions of the entire earth excluding only the areas near the north and south poles

  18. Problems withGeostationary Orbits • Signal can weaken after traveling > 35,000 km • Polar regions and the far northern and southern hemispheres are poorly served • Even at speed of light, about 300,000 km/sec, the delay in sending a signal from a point on the equator beneath the satellite 35,838 km to the satellite and 35,838 km back is substantial.

  19. LEO and MEO Orbits • Alternatives to geostationary orbits • LEO: Low earth orbiting • MEO: Medium earth orbiting

  20. Satellite Orbits

  21. Types of LEOs • Little LEOs: Intended to work at communication frequencies below1 GHz using no more than 5 MHz of bandwidth and supporting data rates up to 10 kbps • Big LEOs: Work at frequencies above 1 GHz and supporting data rates up to a few megabits per second

More Related