1 / 15

Ehzua

  ”Electrochemical protection of metals”. Ukraine,Rivne city Mickevich str. 32, office 323 tel.:+38(067)776-18-62 +38(050)375-31-22 fax:+38(0362)60-90-96 ehzua2013@gmail.com. Ehzua.com. Pantent and ISO standarts. Ehzua.com. «AZK» COMPLETE ANODE GROUNDING ROD. Design.

gregorybrooks
Download Presentation

Ehzua

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1.   ”Electrochemical protection of metals” Ukraine,Rivne cityMickevich str. 32, office 323tel.:+38(067)776-18-62+38(050)375-31-22fax:+38(0362)60-90-96ehzua2013@gmail.com Ehzua.com

  2. Pantent and ISO standarts Ehzua.com

  3. «AZK» COMPLETE ANODE GROUNDING ROD Design Anode grounding rod electrodes type AZK are supplied as complete units consisting of a cylindrical case of galvanized sheet steel, a central electrode and highly conductive carbon fill. The products are made of various kinds according to the technical conditions. The areas of use: oil, gas industry, and also the process of laying out and repairing of the water pipes and heating systems. 1 - anode case;  2 - axial corrosion resistant electrode;  3 - carbon fill; 4 - centering holders;  5 - water-tight connector; 6 - cable inlet; 7 - cable. Graphite-plast used as a main material for central electrodes. Axial graphite-plast electrodes for AZK, together with corrosion-resistant highly conductive anode fill AZB ensure very low (not over 0.05 – 0.1 kg/A year) rate of electrochemical dissolution at maximum current loads.  Ehzua.com

  4. «AZK» COMPLETE ANODE GROUNDING ROD Technical characteristics Ehzua.com

  5. «AZK» COMPLETE ANODE GROUNDING ROD Technical characteristics By the type of central electrode, the anode grounding stations are manufactured Type of central electrode Anode type AZK Graphite-plast Ehzua.com

  6. «AZK» COMPLETE ANODE GROUNDING ROD Operational characteristics of anode grounding rod (main modifications): Ehzua.com

  7. «AZK» COMPLETE ANODE GROUNDING ROD The rate of dissolution of the anode grounding rod is the rate of dissolution of the carbon fill, which is lower than 0.6 kg/(A year) at maximum humidity and current load values. The main constituent of the fill is a special grade of high quality graphite with grain size of 5 to 35 mm and some smaller fraction. The number of grounding rods within the system and the distance between them are chosen as specified by the design of the cathodic protection system. Both vertical and horizontal positions of the rods are permissible; rods are installed in a manner common for other types of systems. Anode grounding rods AZK are intended for service under any climatic and soil conditions, within any type of cathodic protection systems. A standard set of grounding rods normally consists of 24 units; however, they can be delivered in any quantity on the customer’s request. AZK rods are not complete with connecting cables, but such cables can be delivered on request. Ehzua.com

  8. «AZK» COMPLETE ANODE GROUNDING ROD Comparison of AZK with other types of the anode grounding rods. Comparison to other analogues: AZK vs. EGT AZK grounding rods are an improved version of EGT graphite plast tubes; their comparison is given below: - the main advantage of AZK over EGT is in that with equal cost AZK of any version and weight has larger mass and hence greater operation potential; -- AZK 1 of any version (length) of equal cost ensures lower spread and twice the operation potential vs. any version of graphite plast tubes EGT; -- AZK have no union nipples and nipple connections which are known to cause frequent ruptures of EGT tubes. AZK rods have reliable factory-made connectors with several levels of protection; - AZK are easier to transport and simpler to install; - versions AZK (G) are intended for use as great depth anode grounding rods. EGT cause great problems here as they are hard to install, labor-intensive, unreliable at connecting points and nipples. Moreover, vertical strings of them are hard to install and fix. Ehzua.com

  9. «AZK» COMPLETE ANODE GROUNDING ROD Comparison of AZK with other types of the anode grounding rods. Comparison of AZK and ZFS-1 (EF-B). • with equal cost, AZKs 1 of any version (length)ensure 1.2 to 1.6 lower resistance compared to ZFS -1 along with 3 to 5 times greater service potential;- AZK surfaces do not form non-conducting oxide films on them, as, e.g., ZFS do. Such oxide films cause quick failure of any iron-silicon anodes;- AZK anodes can be used both with and without graphite fills, while ZFS-1 anodes cannot;- AZK anodes are lighter than ZFS-1; they are easier to transport ,simpler to install;- version AZK (G) function at great depths, while ZFS-1 cannot be used at large depths due to their great weight. • A very important advantage of anodes AZK over ZFS-1 and ZFS-B is a low rate of change in spread resistance with time. The diagram below shows changes in resistance to spreading vs service life in equal quantities of anodes of different types under similar soil conditions and under equal loads (20 A for a set of 24 anodes). Ehzua.com

  10. «AZK» COMPLETE ANODE GROUNDING ROD Comparison of AZK with other types of the anode grounding rods.  Resistance to spreading vs. service life in different types of anode grounding rods: 1 – ZFS -1 (EFS (B); 2 – AZK 1.2; 3 – AZK-1 As shown by the diagram above, AZK rods have, compared to ZFS-1 (EFS (B), a much longer period of a low initial resistance to spreading; this is, of course, a great advantage in service over ferrosilicon anode grounding rods . Note: line 1 in the diagram is optimistic, as actual characteristics of ZFS-1 rods are often much worse, especially under high moisture soil conditions. Ehzua.com

  11. «AZK (G)» COMPLETE ANODE GROUNDING ROD (DEEP) Application AZK (G) is a deeply submerged anode grounding rod intended for soils with high resistivity and for urban and other highly restricted areas which are not suitable for rods of other types. Design AZK(G) is an assembled unit consisting of AZK anodes placed in special steel cases; such units, in their turn, are assembled to strings and then lowered into a vertical hole; the remaining free space is filled in by carbon filling types AZB, KMA, coke or soil. The case of the rod dissolves quickly during service. Gases evolving in the rod are exhausted via a perforated gas tube which goes up with electric wires to the surface. Ehzua.com

  12. «AZK (G)» COMPLETE ANODE GROUNDING ROD (DEEP) 1 - AZK(G) rod; 2 - anode case; 3 - carrying frame with connector; 4 - cable; 5 - carbon fill or soil; 6 - gas tube;  7 - cover; 8 - gravel;  9 - soil Grounding rod units are assembled under plant conditions and delivered to customers ready for installation. The units are assembled on site before lowering to the hole. The string of the rods (number of units, cable length, other) are specified by the design of the cathodic protection system. Ehzua.com

  13. «AZK (G)» COMPLETE ANODE GROUNDING ROD (DEEP) Technical characteristics anode grounding rod (deep) The main modifications of deep anode grounding stations (G) Technical characteristics of anode grounding rods for deep bore positioning are similar to those of their subsurface versions. More details shall be submitted on request. Ehzua.com

  14. Cathodic protection station (CPS) Scheme of work process Ehzua.com

  15. We look forward to further cooperation Ukraine,Rivne cityMickevich str. 32, office 323tel.:+38(067)776-18-62+38(050)375-31-22fax:+38(0362)60-90-96ehzua2013@gmail.com

More Related