1 / 2

Stepwise Procedures To Use An OBD2 Scanner

Make sure your car is turned off after you've found the DLC. Connect the OBD2 scan tool's end to the Diagnostic Link Connector using an OBD2 connector cable. If you have a Bluetooth OBD2 scanner, insert it directly into the OBD2 port.

gtautoparts
Download Presentation

Stepwise Procedures To Use An OBD2 Scanner

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Stepwise Procedures To Use An OBD2 Scanner Do you have any idea about the OBD2 scanner tool? If not then you have reached the right place. All you need to do is to keep reading the entire article from the very beginning to the end and get to know a bit more about this scanning tool. An OBD2 scanner is a diagnostic tool that communicates with your vehicle through the Diagnostic Link Connector. This is accomplished via a wired connection, Bluetooth, or WiFi, and allows you to scan every diagnostic trouble code generated by your vehicle's computer. Although the OBD2 scan tool appears to be so advanced that you might think it can only be used by a mechanic, this is not the case. In fact, it can be driven by a first-time vehicle owner as well. But, with so many advancements in technology these days, you may be wondering why you should own an On-Board Diagnostic scanner. Below are some facts that will demonstrate why it is critical to use this handy little gadget and how it will benefit you. Also, you will get to know how you can use this small gadget perfectly. The first thing you should do is to locate the diagnostic link connector first. You can check the manual of the device and then do the needful. Make sure your car is turned off after you've found the DLC. Connect the OBD2 scan tool's end to the Diagnostic Link Connector using an OBD2 connector cable. If you have a Bluetooth OBD2 scanner, insert it directly into the OBD2 port. Check the scanner instructions to see if you should leave the car in ON or idle mode after connecting to the DLC. This step is critical because using the incorrect method can damage the scan tool app.

  2. Once you have done with the previous steps, it’s time to access the scanner menu so that you can check all the OBD codes. After that you have to identify as well as understand the OBD codes so that you can fix them as soon as possible. After you've fixed your car's problems, the check engine light should go out after a short drive. However, you can always use your OBD2 scan tool to immediately erase a code. Hope you have learnt the ways to operate an OBD2 scan tool. If you need better suggestion then contact nearest service provider now.

More Related