1 / 2

Current Work

Current Work. Trying to estimate friction on joints Set up FAT32 partition on XPC target machine so I can capture data

guy-emerson
Download Presentation

Current Work

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Current Work • Trying to estimate friction on joints • Set up FAT32 partition on XPC target machine so I can capture data • Got some great data for joint 4, but the friction seems to depend on position more than velocity which seems strange to me. Going to try and estimate this with an average value possibly. • Using a moving average for velocity and acceleration curves now • This is working well • Going to try and boost sampling rate as high as I can go. Average TET is 0.0006 sec, so we might be able to get 1500 Hz

  2. What's Next • Finish position/trajectory control (once I have the gains and friction compensation this should work well) • Integrate blending into the points of the trajectory so we get smooth velocity/acceleration • Possibly write a program sending position commands over UDP • Test and debug Simulink model for Barrett Hand • Coordinate the trajectory model and the hand model

More Related