1 / 21

Exploring the World of 3G Cellular Communication

Discover the evolution from 2G to 3G cellular systems, encompassing global roaming, wider bandwidths, and packet switching concepts. Learn about IMT-2000's vision, major players, architectures, services, W-CDMA, and CDMA2000 technologies.

hackett
Download Presentation

Exploring the World of 3G Cellular Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless &Mobile Communications Chapter 9: 3G Cellular What is 3G? The ITU’s International Vision The need/motivation for 3G The Major Players 3G Architecture and Services W-CDMA and CDMA2000 technologies

  2. What is 3G? • The current cellular system is referred to as 2G cellular. • It differs from the the first generation cellular in that the system is fully digital and provides roaming on a national or regional basis • The next generation cellular, 3G, is envisioned to enable communication at any time, in any place, with any form, as such, it will: • allow global roaming • provide for wider bandwidths to accommodate different types of applications • support packet switching concepts • The ITU named this vision: IMT-2000 (International Mobile Telecommunications 2000) with the hope of having it operational by the year 2000 in the 2000MHz range. Ch9: 3G Cellular

  3. IMT 2000 Vision • Common spectrum worldwide (2.8 – 2.2 GHz band) • Multiple environments, not only confined to cellular, encompasses: cellular, cordless, satellite, LANs, wireless local loop (WLL) • Wide range of telecommunications services (data, voice, multimedia, etc.) • Flexible radio bearers for increased spectrum efficiency • Data rates of: 9.6Kbps or higher for global (mega cell), 144Kbps or higher for vehicular (macro cell), 384Kbps or higher for pedestrian (micro cell) and up to 2Mbps for indoor environments (pico cell) • Global seamless roaming • Enhanced security and performance • Full integration of wireless and wireline Ch9: 3G Cellular

  4. Major 3G Technologies Proposed for IMT 2000 • W-CDMA backward compatible with GSM (called UMTS by the ETSI) • The IS-95 standard (CDMAOne) is evolving its own vision of 3G: CDMA2000 • The IS-136 standard is evolving its own migration to 3G, Universal Wireless Communications, UWC-136 or IS-136 HS Ch9: 3G Cellular

  5. Who will be first to offer IMT 2000? • The Japanese are leading the pack with their W-CDMA implementation. It is being rolled out in the year 2001. • The Koreans plan to have CDMA2000 up an running before the world cup in 2002. • The Europeans are pushing hard to UMTS up soon but the current push is fro 2.5G, a middle of the road to protect current infrastructure investments. • In the US no major push yet, some service providers are following in the footsteps of the Europeans by pushing a 2.5G solution. Ch9: 3G Cellular

  6. IMT 2000 Services/Capabilities 1/2 • All what 2G support including: • Registration, authentication and encryption • SMS • Emergency calling • Bit rates: • 144Kbps or higher for vehicular (macro cell), • 384Kbps or higher for pedestrian (micro cell) and • up to 2Mbps for indoor environments (pico cell) • Billing/charging/user profiles • Sharing of usage/rate information between service providers • Standardized call detail recording • Standardized user profiles Ch9: 3G Cellular

  7. IMT 2000 Services/Capabilities 2/2 • Support of geographic position finding services • For the mobile • For the network • Support of multimedia services • QoS • Assymmetric links • Fixed and variable rate • Bit rates of up to 2Mpbs • Support of packet services • Internet Access (wireless cellular IP) Ch9: 3G Cellular

  8. IMT 2000 Family Concept • The IMT 2000 family concept defines some basic interoperability capabilities between different IMT 2000 technologies to enable global roaming! • Different Radio Access Networks (RANs): • CDMA2000 • W-CDMA • UWC-136 • Different Core Network standards • IS 41 • GSM • ISDN Ch9: 3G Cellular

  9. Challenge for the Family Concept • With IMT 2000 Standard Interfaces and Capabilities: • Any Family RAN could interface with any Family Core Network for some minimum set of features. • More advanced features are possible in limited regions where the Family RAN and the Family Core Network are optimally matched • The Core Network functionality should be kept independent of the Radio technology. • By maintaining independence, each can evolve separately based on needs • User Identity Modules (UIM) Plug-In modules could be used in locally rented handsets for Global Roaming with at least the minimum feature set. (similar to GSM SIMs) Ch9: 3G Cellular

  10. UIM Roaming • UIM cards should allow a subscriber to obtain: • Any IMT 2000 service/capability basic feature set on • Any IMT 2000 Network family member (W-CDMA, CDMA2000 and UWC-136) • UIM Card: will be a superset of the current GSM SIM • Contains all necessary information about the user’s service subscriptions • Supports user identity separate from handset identity: • Allows a user to use different handsets, with all usage billed to the single user • Allows a user to rent a handset in a foreign country/network and obtain instant service Ch9: 3G Cellular

  11. To reach the IMT 2000 vision • Physical interfaces are being standardized: • UIM to handset interface • Radio/Air interfaces • RAN to Core Network • Network to Network Interfaces (NNI) between Core Networks • Radio independent functions are being standardized: • UIM to handset • Handset to Core Network • NNI Ch9: 3G Cellular

  12. Key Technology Concepts for 3G • Higher bit rates required -> more bandwidth • Packet and circuit switched services • Coherent demodulation • TDD • Architecting for minimum required Eb/Io • Control Eb • Limit/Cancel Io • Smart antennas Ch9: 3G Cellular

  13. Higher bit rates -> larger bandwidths • No free lunch!!! • For a CDMA system; • For 2-4Mbps you need around 20MHz channel • For 1-2Mbps you need around 10MHz channel • For 256Kbps-1Mbps you need around 5MHz channel Ch9: 3G Cellular

  14. Packet and Circuit Switched Services • CS channels: 32 – 384 Kbps • PS channels: 64Kbps to 2Mbps • Circuit mode versus packet mode for data services: • Circuit mode • provides a dedicated channel for the duration of the call • Can mux control with data in same channel, can be a problem for data if bit stealing is used • Packet mode • Requires a scheduling scheme to control access to the shared channel • Generally supports a separate control channel • CDMA Packet Mode: two main approaches • Users share a dedicated channel (code): • Sequential access or scheduled on a need basis • Users share the allowable total interference for the carrier: • Each user gets a unique code • Users must be scheduled and transmissions controlled to limit the load in the system • Combination of the above two Ch9: 3G Cellular

  15. Coherent vs Non coherent demodulation • Non coherent demodulation – where the receiver has no reference phase with which to compare the received signal • Coherent demodulation – where the receiver does have a reference pahse, supplied by the transmitted • A continuous Pilot ( or Reference) channel transmitted along with the signal (e.g. pilot channel in IS-95 for downlink) • A known sequence of Pilot (or Reference) symbols (or bits) embedded, periodically, in the signal bit stream (e.g. proposed for W-CDMA in both uplink and downlink channels, also CDMA2000 incorporates a pilot channel in reverse direction) Ch9: 3G Cellular

  16. TDD • All the standards naturally support FDD • Symmetric channels for up and down links • TDD can be added to allow transmission and reception in single frequency band. • Japanese W-CMDA supports an asymmetric TDD channel in addition to the FDD support • TDD allows for flexible spectrum usage, does not require paired frequency bands • Simpler, lower cost handsets – no need for duplex filters • More complex synchronization, the channel flips back and forth between uplink and downlink. Ch9: 3G Cellular

  17. Architecting for Minimum Required Eb/Io • Eb/Io vs Eb/No vs C/SIR or SNR: • The former two refer to the energy per bit and are therefore more applicable to digital systems. The latter two are generally used to refer to analog systems. • Using I vs N basically has to do with what the noise source is, in cellular systems it is primarily due to interference so ``I” is the preferred term. • Eb =P/R • P is the power per bit in units of energy/sec • R is the signal bit rate in bits/sec • Eb is the received energy per bit of the signal, Io is the interference power density • Eb is directionally proportional to the received power of the signal • For CDMA: Eb/Io = (Pm/Itot) x (W/R) = SIR x Processing Gain • Eb/Io is the key parameter in determining the probability of receiving a bit correctly (I.e., the BER) Ch9: 3G Cellular

  18. Techniques to keep Eb/Io low with higher bit rates • Maximize Frequency diversity – wider bands -> higher processing gains • Maximize Time diversity – • Rake receivers -> multiple signals with different delays at receiver, • interleaving with FEC • Maximize Space diversity – • diverse receive antennas at base station, • rake receivers -> different signal paths • Use FEC (forward error correction) • All of the above techniques come at a cost: • Higher bandwidth • More complex receivers (rake, multiple antennas) • More overhead bits (FEC) per signal Ch9: 3G Cellular

  19. Controlling Eb • More power is required for the transmission of bits at higher bit rates over the same distance • Limit the distance over which high bit rates maybe sent • Using better antennas that will focus the beam so that: • The transmitter aims at the target without wasting energy in all directions • The receiver captures more of the signal as it is focused on a narrow beam • Fast power control to counteract changes in interference due to • Changing loads • Changing environments Ch9: 3G Cellular

  20. Limit Io • Use better antennas with focused beams in conjunction with sectors • Use interference cancellation -> receive all signals and subtract all but the desired one from the total • Use more accurate and fasted power control techniques • To not transmit signals when there is a silence in the signal Ch9: 3G Cellular

  21. Smart Antennas • Switched beams: • Several antenna beams used to receive the signal • Use the antenna that receives the strongest signal • Not well suited to CDMA: • Switching will cause chip errors • Switching could disturb synchronization and demodulation • Works against the concept of the Rake receiver • Adaptive Arrays: • Narrow beam antenna which is steered to follow the mobile(s) • Better suited to CDMA but still have the Rake receiver problem Ch9: 3G Cellular

More Related