1 / 15

Chabot College

Chabot College. ELEC 99.08 autoinstall and SLARP. Autoinstall. Scenario: We plug in and connect a brand-new router. Wouldn’t it be great if it could load its configuration file automatically?

hailey
Download Presentation

Chabot College

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chabot College ELEC 99.08 autoinstall and SLARP

  2. Autoinstall • Scenario: We plug in and connect a brand-new router. Wouldn’t it be great if it could load its configuration file automatically? • What would the router need to load its config file over the network from a server that holds that file?

  3. Autoinstall • Automated process that attempts to find a router configuation file • Autoinstall starts automatically if • A serial interface on a new cisco router with no config is connected via an HDLC-encapusulated serial link to another Cisco router. • the other router is “up” • the router is running an IOS release of 12.0.4 or older.

  4. Autoinstall • Step 1 - autoinstall obtains an IP address for the connected serial interface using SLARP - Serial Line Address Resolution Protocol: new router existing router HDLC “Give me an IP address” 192.168.0.2 192.168.0.1

  5. SLARP

  6. SLARP • Interface summary during setup dialog shows results of SLARPing: First, would you like to see the current interface summary? [yes]: Interface IP-Address OK? Method Status Protocol Ethernet0 unassigned YES unset administratively down down Serial0 3.0.0.1 YES SLARP up up Serial1 unassigned YES unset administratively down down Address resolved via SLARP

  7. SLARP • Interface summary during setup dialog shows results of SLARPing: First, would you like to see the current interface summary? [yes]: Interface IP-Address OK? Method Status Protocol Ethernet0 unassigned YES unset administratively down down Serial0 3.0.0.1 YES SLARP up up Serial1 unassigned YES unset administratively down down Other interfaces shut down

  8. SLARP • E0 and S1 have been shutdown. • In order to bring these interfaces back up, the administrator must manually remove the shutdown command. First, would you like to see the current interface summary? [yes]: Interface IP-Address OK? Method Status Protocol Ethernet0 unassigned YES unset administratively down down Serial0 3.0.0.1 YES SLARP up up Serial1 unassigned YES unset administratively down down Other interfaces shut down

  9. SLARP • SLARP message during boot of router with no config: Notice: NVRAM invalid, possibly due to write erase. SLARP: interface Serial0 resolved. This interface has been automatically resolved thru the SLARP process. The router will now attempt to retrieve its name and configuration file.

  10. Autoinstall • Step 2 - autoinstall writes this line to the default config on the new router: version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption service config ! hostname Router !

  11. Autoinstall • Step 3 - “service config” begins a series of broadcasts to request that a tftp server load a configuration file to the new router: new router existing router HDLC 192.168.0.2 192.168.0.1 “Is there a tftp server that can send me a config file?”

  12. Autoinstall • When no tftp server answers these broadcasts, delays and error messages result: %Error opening tftp://255.255.255.255/network-confg (timeout)%Error opening tftp://255.255.255.255/cisconet.cfg (timeout)%Error opening tftp://255.255.255.255/router-confg (timeout)%Error opening tftp://255.255.255.255/ciscortr.cfg (timeout) • Above, a router that has “SLARPed” is looking on the network for a generic configuration file. Use CTRL-SHIFT-6 and then X to stop this process.

  13. Disabling Autoinstall • If your router continues to waste resources looking for a configuration file on the network, you can disable the autoinstall function with this command in config mode: version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption no service config ! hostname Router !

  14. To prevent autoinstall from running... • Don’t connect a V.35 cable to S0 until you’ve configured the router, or • Turn off the router on the other end of the serial link. • We don’t face this issue in our lab...

  15. In Our Lab... • In IOS version 12.0(10), autoinstall does not start automatically when your serial lines are connected. • The IOS does not add the service config command to the default configuration, and does not begin the search for a tftp server. -That’s good! • However the IOS does SLARP and obtain an IP address for one of your serial ports. - That’s not a problem, if you remember it!

More Related