1 / 20

Orthogonal frequency division mu L tiplexing

Orthogonal frequency division mu L tiplexing. BY www.tricksworld.net.tc. DISADVANTAGES OF RADIO PROPAGATION. path loss fading Doppler shift multipath delay spread. OFDM INTRODUCTION.

haines
Download Presentation

Orthogonal frequency division mu L tiplexing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Orthogonal frequency division muLtiplexing BY www.tricksworld.net.tc

  2. DISADVANTAGES OF RADIO PROPAGATION • path loss • fading • Doppler shift • multipath delay spread

  3. OFDM INTRODUCTION Orthogonal frequency-division multiplexing (OFDM) is a frequency-division multiplexing (FDM) scheme utilized as a digital multi-carrier modulation method. A large number of closely-spaced orthogonal sub-carriers are used to carry data. The data is divided into several parallel data streams or channels, one for each sub-carrier. Each sub-carrier is modulated with a conventional modulation scheme (such as quadrature amplitude modulation or phase shift keying) at a low symbol rate, maintaining total data rates similar to conventional single-carrier modulation schemes in the same bandwidth.

  4. OFDM DEFINITION • OFDM also known as Multi-Carrier or Multi-Tone Modulation • DAB-OFDM Digital Audio Broadcasting • DVD-OFDM Digital Video Broadcasting • ADSL-OFDM Asynchronous Digital Subscriber Line • Wireless Local Area Network IEEE-802.11a, IEEE-802.11g ETSI BRAN (Hyperlan/2)

  5. HISTORY OF OFDM • The origins of OFDM development started in the late 1950’s with the introduction of Frequency Division Multiplexing (FDM) for data communications. • In 1966 Chang patented the structure of OFDM and published the concept of using orthogonal overlapping multi-tone signals for data communications. • In 1971 Weinstein introduced the idea of using a Discrete Fourier Transform (DFT) for implementation of the generation and reception of OFDM signals, eliminating the requirement for banks of analog subcarrier oscillators. suggested that the easiest implementation of

  6. CONTD. • This presented an opportunity for an easy implementation of OFDM, especially with the use of Fast Fourier Transforms (FFT), which are an efficient implementation of the DFT. • Until the late 1980’s that work began on the development of OFDM for commercial use, with the introduction of the Digital Audio Broadcasting (DAB) system.

  7. TRANSMITTER

  8. OFDM Modulator

  9. OFDM Demodulator

  10. RECIEVER

  11. CHARACTERISTIS AND PRINCIPLE OF OPERATION • ORTHOGONALITY In OFDM, the sub-carrier frequencies are chosen so that the sub-carriers are orthogonal to each other, meaning that cross-talk between the sub-channels is eliminated and inter-carrier guard bands are not required. This greatly simplifies the design of both the transmitter and the receiver; unlike conventional FDM, a separate filter for each sub-channel is not required. The orthogonality requires that the sub-carrier spacing is Δf = k/(TU) Hertz, where TU seconds is the useful symbol duration (the receiver side window size), and k is a positive integer, typically equal to 1.

  12. CHANNEL CODING AND INTERLEAVING • OFDM is invariably used in conjunction with channel coding (forward error correction), and almost always uses frequency and/or time interleaving. • The reason why interleaving is used on OFDM is to attempt to spread the errors out in the bit-stream that is presented to the error correction decoder, because when such decoders are presented with a high concentration of errors the decoder is unable to correct all the bit errors, and a burst of uncorrected errors occurs. • The information is typically FEC encoded and interleaved prior to modulation

  13. Versions of ofdm • MIMO OFDM • Multiple Input, Multiple Output Orthogonal Frequency Division Multiplexing is a technology developed by Iospan Wireless that uses multiple antennas to transmit and receive radio signal According to Iospan, • "In this environment, radio signals bounce off buildings, trees and other objects as they travel between the two antennas. This bouncing effect produces multiple "echoes" or "images" of the signal. As a result, the original signal and the individual echoes each arrive at the receiver antenna at slightly different times causing the echoes to interfere with one another thus degrading signal quality.

  14. The MIMO system uses multiple antennas to simultaneously transmit data, in small pieces to the receiver, which can process the data flows and put them back together. • VOFDM (VECTOR OFDM) VOFDM (Vector OFDM) uses the concept of MIMO technology and is also being developed by Cisco Systems. • WOFDM (WIDEBAND OFDM) WOFDM - Wideband OFDM, developed by Wi-Lan, develops spacing between channels large enough so that any frequency errors between transmitter and receiver have no effect on performance.

  15. FLASH-OFDM Flash-OFDM (Fast Low-latency Access with Seamless Handoff Orthogonal Frequency Division Multiplexing), which is also referred to as F-OFDM, is a system that is based on OFDM and specifies also higher protocol layers. It has been developed and is marketed by Flarion. Flash-OFDM has generated interest as a packet-switched cellular bearer, where it would compete with GSM and 3G networks.

  16. applications WIRED APPLICATION • ADSL and VDSL broadband access via POTS copper wiring. • Power line communication (PLC). • Multimedia over Coax Alliance (MoCA) home networking. • ITU-T G.hn, a standard which provides high-speed local area networking over existing home wiring (power lines, phone lines and coaxial cables).

  17. Advantages • Can easily adapt to severe channel conditions without complex equalization • Robust against narrow-band co-channel interference • Robust against Intersymbol interference (ISI) and fading caused by multipath propagation • High spectral efficiency • Efficient implementation using FFT • Low sensitivity to time synchronization errors • Tuned sub-channel receiver filters are not required (unlike conventional FDM)

  18. Disadvantages • Sensitive to Doppler shift. • Sensitive to frequency synchronization problems. • High peak-to-average-power ratio (PAPR), requiring linear transmitter circuitry, which suffers from poor power efficiency. • Loss of efficiency caused by Cyclic prefix/Guard interval

  19. CONCLUSION • Performs better than a single modulated carrier in multipath fading • With a properly implemented guard interval: – Time waveform appears periodic – orthogonality of subcarriers is ensured – ISI and ICI are eliminated

  20. REFERENCES • http:// Orthogonal frequency-division multiplexing - Wikipedia, the free encyclopedia.htm • http://loadrunner.uits.iu.edu/upgrade/ • http://www.springerlink.com • http://www.wpi.edu/Admin/IT/Ofdm/history. • http://Ofdm.stanford.edu • http://news.Ofdm.edu/prAreaSelect.cfm

More Related