1 / 13

Proceedings of FuelCell2006

Proceedings of FuelCell2006 Fourth International ASME Conference on Fuel Cell Science, Engineering and Technology Irvine, California. June 19-21 2006 FUELCELL2006-97031. ELECTRICAL CHARACTERIZATION OF A GLUCOSE-FUELED ALKALINE FUEL CELL. Experimental Determination of:.

halia
Download Presentation

Proceedings of FuelCell2006

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Proceedings of FuelCell2006 Fourth International ASME Conference on Fuel Cell Science, Engineering and Technology Irvine, California. June 19-21 2006 FUELCELL2006-97031 ELECTRICAL CHARACTERIZATION OF A GLUCOSE-FUELED ALKALINE FUEL CELL

  2. Experimental Determination of: • Quasi-static polarization curves, V(J); • 2) Power Density as a function of current density, PD(J) • 3) Ohmic internal resistance of the cell, RFC. Experimental Conditions

  3. Procedure FIGURE 2: FUEL CELL VOLTAGE AS A FUNCTION OF TIME DURING THREE CONSECUTIVE CONNECTION-DISCONNECTION CYCLES, [glu]0 = 0.67M; RL =10.29W., 9.28W, 8.4 W.

  4. = V@(tc + 0.1s) = V@(td + 0.1s) FIGURE 3: FUEL CELL VOLTAGE AS FUNCTION OF TIME DURING A CONNECTION-DISCONNECTION CYCLE. RL = 10.29 W; [glu]0 = 0.67M

  5. Small Values Polarization Curve for different [glu]0

  6. Maximun at 0.22 M Power Density as Function of Current Density of Various [glu]0 Low Values Competence with non-electrochemical reactions

  7. Internal Resistance 1 - Voltage Divider Method Assuming that only the ohmic resistance can react immediately Current at VIRC

  8. 2 – Current Interrupt Method At the disconnection instant, there is a sudden increase in the cell’s voltage, DVD, caused by the immediate annulment of the ohmic losses The current at the disconnection instant is:

  9. Horizontal continuous line indicates the RFCmean RFC as function of RL computed from the "VOLTAGE DIVIDER“ method [glu]0 = 0.22 and 0.67 M.

  10. Glucose Concentration dependent term Internal Resistance as function of the glucose concentration RFCmean = RK + RC[glu]0 [W] Glucose Concentration independent constant RFC, 0.35 M KOH = 2.02 + 3.54[glu]0 [W]

  11. [W·M-1] W·M-1·m Internal Resistance dependence on Glucose concentration, RC: RFCmean = RK + RC[glu]0 [W] The glucose concentration contributes to the ohmic resistance only in the volume between the two electrodes. As any ohmic resistor: Rc(1M glucose in 0.35 M KOH) = 2.56 W·m

  12. Internal resistance factor independent of the glucose concentration, RK. RFCmean = RK + RC[glu]0 [W] RK includes ohmic resistances that don’t depend on glucose concentration, Rk = Rmetallic mesh + Rconnections + R0.35M KOH RK = 2.02 W > R0.35M KOH RK Contributes to the ohmic resistance only in the volume between the two electrodes. As any ohmic resistor R0.35M KOH= 0.21 W < 2.02 W = RK

  13. Conclusions At a [KOH] = 0.35M, the cell reaches peak performance at [glu]0 = 0.22M The two methods used to measure the internal resistance of the fuel cell, Voltage Divider and Current Interrupt, yield practically identical results Efforts will be directed towards development of practical glucose-fueled AFC, as electricity generators for portable devices • Proposed Directions: • The effect of temperature on cell performance. • Development of nano-tube electro-catalytic electrodes

More Related