1 / 22

171-SH2346-1458

171-SH2346-1458. Box with Pre-Installed 10 1 ⁄ 2 " Pigtail. Popular 4" square boxes and switch boxes Pre-installed 10 1 ⁄ 2 " insulated grounding pigtails Save on labor costs by eliminating multiple installation steps. 521711234EP. Box with Pre-Installed 10 1 ⁄ 2 " Pigtail.

hamilton-moore
Download Presentation

171-SH2346-1458

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 171-SH2346-1458

  2. Box with Pre-Installed 101⁄2" Pigtail • Popular 4" square boxes and switch boxes • Pre-installed 101⁄2" insulated grounding pigtails • Save on labor costs by eliminating multiple installation steps 521711234EP

  3. Box with Pre-Installed 101⁄2" Pigtail

  4. Box with Pre-Installed 101⁄2" Pigtail and Box Support Cover • 4" square welded box, 11⁄2" or21⁄8" deep • Pre-installed 101⁄2" insulatedgrounding pigtail • Box support cover combines box-to-stud mounting bracket with device cover • One- or two-device box support cover, raised 1⁄2", 5⁄8", or 3⁄4" • Save on labor costs by eliminating multiple installation steps 52171-CM14-5/8 52171-CM14-5/8mounted to stud

  5. Box with Pre-Installed 101⁄2" Pigtail and Box Support Cover

  6. Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Box-to-Stud Bracket • 4" square welded box, 11⁄2" or 21⁄8" deep • Pre-installed 101⁄2" insulated grounding pigtail • One- or two-device cover, raised 1⁄2", 5⁄8", or 3⁄4" • SSF-SH2346 box-to-stud mounting bracket • Save on labor costs by eliminating multiple installation steps SSF-SH2346 171-SH2346-1458

  7. Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Box-to-Stud Bracket

  8. Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Vertical Mounting Bracket • 4" square welded box, 11⁄2" or 21⁄8" deep • Pre-installed 101⁄2 " insulated grounding pigtail • One- or two-device cover, raised 1⁄2", 5⁄8", or 3⁄4" • 12" (SSF-SV12) or 18" (SSF-SV18) vertical mounting bracket • Save on labor costs by eliminating multiple installation steps 151-SV12-1458 151-SV18-1458

  9. Box with Pre-Installed 101⁄2" Pigtail, Raised Cover, and Vertical Mounting Bracket

  10. Box with Pre-Installed 101⁄2" Pigtail • Popular 4" square boxes and switch boxes • Pre-installed 101⁄2" insulated grounding pigtails • Save on labor costs by eliminating multiple installation steps 521711234EP

  11. Horizontal Mounting Brackets • Constructed of 24-gauge steel • Can be mounted at any height to meet individual project requirements • Device cover (mud ring) mounts to front of bracket to set box in desired location • Versatile, open design enables mounting of box in any location across horizontal plane between studs • Stamped rule on bracket with 1⁄4", 1⁄2", and 1" markings enables fast box setting SBO16 mounted to 16" studs with one 4" square box installed SBO24 mounted to 24" studs with one 4" square box installed

  12. SBO16 Stud-to-Stud Horizontal Mounting Bracket • Pre-measured on center for 16" stud spacing • Accepts three 4" square or two 4" boxes (deep or shallow) SBO16 SBO16 mountedto 16" studs withone 4" squarebox installed SBO16 mountedto 16" studs withthree 4" squareboxes (full capacity) installed

  13. SBO24 Stud-to-Stud Horizontal Mounting Bracket • Pre-measured on center for 24" stud spacing • Accepts five 4" square or four 411⁄16" boxes (deep or shallow) SBO24 SBO24 mountedto 24" studs withone 4" squarebox installed SBO24 mounted to 24" studs with five 4" squareboxes (full capacity) installed

  14. SV1218 Floor-Track 12" and 18" Vertical Mounting Bracket • Mounts to floor track easily with screws through three pre-punched holes in bottom plate • Offers pre-measured box-mount locations at 12" and 18" from floor — fast installation with no measuring required • Accepts 4" square or 411⁄16" boxes (deep or shallow) with standard device covers • Supplied with horizontal cross-support bar for stability after installation SV1218

  15. SV1218 Floor-Track 12" and 18" Vertical Mounting Bracket (continued) • Support bar sits in two slotted tabs on backside of vertical bracket and mounts from stud to stud horizontally • Support bar pre-measured for 24" stud cavities (score lines provided for 16" stud cavities) with pre-punched holes at stud locations for left or right stud installation SV1218 mounted to floor track and studs with one 4" square box installed

  16. SVX Adapter Plate for SV1218 Floor-Track Vertical Mounting Brackets SVX with box installed SVX • Optional SVX adapter plate expandsbox capacity • Installs to pre-punched and tapped holes on sides of SV1218 • One SVX plate can be added with 16" stud spacing • Up to two SVX plates can be added with 24" stud spacing • SVX adapter plate accepts all device covers for 4" and 411⁄16" boxes SV1218 mounted to floor track and studs with one 4" square box installed and optional SVX adapter plate with one box installed

  17. Box Support Covers • Combines a box-to-stud mounting bracket with a device cover in one easy-to-use product • Designed for use with 4" square boxes • Used with both steel and wood studs • Cover raised 1⁄2", 5⁄8", or 3⁄4" • Designed for one or two devices 52CM14-5/8

  18. Box-to-Stud Mounting Brackets • Attaches 4" or 411⁄16" electrical box to metal stud • Support leg can be attached to stud to eliminate movement of box in wall • Attaches to metal or wood stud using self-tapping screws and screw gun or nails • Single model has capability to mount boxes on 21⁄2", 31⁄2", 4", and 6" stud, which means less inventory • SH4 and SH6 brackets available specifically for 4" and 6" studs, respectively SSF-SH2346

  19. Adjustable Box Brackets • Designed for metal studs 16" or 24" on center • Can also be adjusted for non-standard stud spacing • Adjustable tabs accommodate 11⁄2" or 21⁄8" box depths • Enables mounting of multiple boxes • Installs easily — dimples provide a starting point for screws SSF-SG16A

More Related