1 / 14

CALCULATIONS I

CALCULATIONS I. Reconstituting Cytokines/Growth Factors. Need To Supplement Cultures With Recombinant Growth factors/Cytokines Issues To Consider Recombinant factors are typically lyophilized (mg, g) Appropriate solvent Ex. PBS, dH 2 O BSA for stability. Minimize sticking to vial.

hamilton-moore
Download Presentation

CALCULATIONS I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CALCULATIONS I

  2. Reconstituting Cytokines/Growth Factors • Need To Supplement Cultures With Recombinant Growth factors/Cytokines • Issues To Consider • Recombinant factors are typically lyophilized (mg, g) • Appropriate solvent Ex. PBS, dH2O • BSA for stability. Minimize sticking to vial. • Sterility is very important. • Minimize thawing-unthawing (degradation)

  3. Units You Should Know • milli, Ex. mg (10-3) • micro, Ex. L (10-6) • nano, Ex. ng (10-9) • pico, Ex. pg (10-12) • femto, Ex. fg (10-15)

  4. Tricks You Should Know • 1 mg/mL SAME AS 1 g/L • 1 mg/mL SAME AS 1000 g/mL • 1 mg/mL SAME AS 1 mg/1000 L • 0.500 mg/mL SAME AS 500 g/mL • 500 g/mL SAME AS 500 ng/L

  5. Formula For Reconstitution C: concentration of factor (Ex. mg/mL) M: mass of factor (Ex. mg, g, ng) V: volume of reconstitution (Ex. mL, L)

  6. Example 1 A vial of GM-CSF of 0.5 g is available. The instructions state that the lowest concentration to use should be 5 g/mL. In addition they recommend to use PBS with BSA at a concentration of 500 g/mL.

  7. Example 1 • Determine BSA mass (BSA is in powder form) • You will need 100 L of solvent, which means 50 g. Can you weigh accurately 50 g? 0.000050 g!NO! • Make 1,000 mL, This means 1000 mL x 500 g/mL 500,000 g, same as 500 mg, same as 0.5 g • You can easily weigh 0.5 g • Discard the rest

  8. Example 1 • You determined 100 L volume • How about aliquots, 1 L, 5 L, 20 L? • Think of how you will use it. Let’s say you will be “feeding” a 10 mL culture at 10 ng/mL •  10 mL x 10 ng/mL, 100 ng •  20 L per tube (20 L x 5 ng/L=100 ng) • The objective is to avoid thawing/unthawing • If you cannot avoid it, mark tube and use marked tube next time

  9. Exercise 1 • You received a vial of rIL-2. Vial states 50 g • Reconstitute @ 500 ng/L • Determine volume to reconstitute in and appropriate aliquoting if rIL-2 will be used to feed 100 mL cultures at 10 ng/mL

  10. Exercise 1 • Volume: 100 L • Aliquot: 2 L per tube (50 tubes) • Avoid working with anything lower than 1 L, accuracy becomes unreliable.

  11. Converting (mass/unit volume) concentrations to Molarities • Often you will know the Molar concentration to “feed” your culture and the factor concentration will be mass/volume • Ex. “Feed” 10 mL culture with factor X @ 10-6M • Factor X concentration is 2 mg/mL • Convert 2 mg/mL to Molarity • You need MW of factor X (10,000 g/mole)

  12. Converting (mass/unit volume) concentrations to Molarities • Use dilution formula to determine how much to use from stock solution • C1V1=C2V2 • Solve for V1=(C2V2)/C1 • V1=(1 M x 10 mL)/200 M =0.050 mL=50 L • Note volume you are adding to culture has to be insignificant to culture volume for calculation to be accurate. Why?

  13. Exercise 2 • Stock concentration of cytokine: 2 mg/mL • Determine Molarity (MW of cytokine: 200 KDa) • Determine What Volume To Use To Feed 30 mL Of Culture at 10-7 M • Answer: 10 M; 300 L

  14. Determining Approximate MW For Proteins and Oligonucleotides • 125 g/mole for each amino acid • 58 a/a cytokine (~125 g/mole)x(58) • =7,250 g/mole OR 7.250 KDa • Nucleic acids 325 g/mole • 25 nucleotide oligo (325 g/mole x 25) • =8,125 g/mole

More Related