1 / 2

HDP20

Power ratings up to 18.5kw<br><br>Vertical 3 cylinder design<br><br>Wide variety of complementary ancillaries.<br><br>Pressure upto-3500 bar<br><br>Flow rate upto- 103 lpm

hammelmannindia
Download Presentation

HDP20

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HDP 20 High Pressure Pump Series Design criteria Hammelmann high pressure pumps are built to operate at the continuous maximum duty stated in the performance parameters. Just compare the crank shaft speed, average plunger speed, plunger diameter and power rating. High Pressure Pump Weight: 95 kg Features • Power ratings up to 18,5 kW • Vertical 3 cylinder design • Wide variety of complementary ancillaries Quality and reliability • Stainless steel pump head free of alternating stress • Bellows form hermetic seal between the suction chamber and crank section • Choice of application specific seal assemblies • Solid ceramic or tungsten carbide plungers • Choice of bronze (standard) or stainless steel suction chamber • Crank section calculation by ‘Finite element method’ ensures long working life under continuous load • Pressurised oil lubrication system • Separate oil pump Stationary unit with electric motor Length: 1000 mm Width: 752 mm Height: 890 mm Weight: approx. 450 kg at 22 kW Main dimensions without accessories such as suction line, pressure regulator etc. All shown as right side drive. Detailed dimensional drawings and weights available on request. © Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Technische Änderungen vorbehalten.

  2. Performance parameters Performance parameters Required power rating [kW] 11 Operating pressure [bar] 2,2 2,7 3,2 1550 3,5 4,2 5,1 980 *At pressures over 2000 bar approx. 5% of the flow rate is lost due to the compressibility factor of water 3,5 4,2 5,1 980 1300 1800 6 7 8 710 960 1150 HDP 20 series, technical data • Rod force: 17,6 kN • Stroke: 30 mm • Mean piston speed at n2 625 r.p.m. = 0,63 m/sec r.p.m. Q 18,5 15 D [l/min]* n1 n2 2200 1850 3000 2500 2100 1950 1600 1300 3500 3100 2600 2200 2000 1650 625 750 900 625 750 900 750 r.p.m. = 0,75 m/sec 8 900 r.p.m. = 0,90 m/sec 1500/1800/2150 1400 1150 10 1400 1150 1800 1600 625 750 900 625 750 900 Typical high pressure pump units 1800 10 940 810 1250 1100 1550 1350 12 9 630 520 860 710 990 870 625 750 15 11 12 15 450 380 620 520 730 640 625 750 17,5 16 20 350 290 480 400 560 490 625 750 20 1500/1800/2150 25 31 220 190 300 250 360 310 625 750 25 37 45 150 180 210 220 250 260 625 750 30 • Stationary unit with electric motor 51 62 115 95 150 130 180 160 625 750 35 68 82 85 75 120 100 140 120 625 750 40 86 103 70 55 95 75 110 95 625 750 45 D = Piston/Plunger dia. [mm] n1 = Motor/Engine r.p.m. n2 = Crankshaft r.p.m. Conversion table Rating Op. pressure 1 bar = 14.5 psi Flow rate 1 l 1 l 1 kW = 1.34 HP = 0.264 US gallon = 0.22 Imp. gallon Type designations HDP Type Sealing system D Hydrodynamic with tungsten carbide plungers Labyrinth with solid ceramic plungers Packed sleeves with solid ceramic plungers 8 24 10 - 45 22 10 - 45 27 D = Piston/Plunger dia. [mm] • Stationary electric unit with sound damping cover Hammelmann Maschinenfabrik GmbH Postfach 3309 • D-59282 Oelde Telefon (0 25 22) 76-0 Zum Sundern 13-21 • Germany eMail: mail@hammelmann.de Telefax (0 25 22) 76-444 Internet: www.hammelmann.de 10/09 © Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Subject to modification.

More Related