1 / 4

Process Pump

With very compact design these pumps provide zero emission operation by using hermetically seals within the pump which provides prevention of leakage to atmosphere during operation that enables use of the pump in hazardous areas.<br>Typical operations include pumping of methanol, jet fuel, ethanol, diesel oil, crude oil etc.<br>Some typical applications like Fatty alcohol process, LDPE, Wet oxidation, Nonwoven fabrics use these pumps.

hammelmannindia
Download Presentation

Process Pump

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Process pumps Process pumps T Typical fluids ypical fluids Acrylic acid Adipoladipinat Amine Ammonia Butane Carbon dioxide Crude oil Diesel oil Ester Ethanol Fatty acids Glucose Glycol Hot water Hydrocarbons Inhibitors Jet fuel LDHI Methanol Methyl ester Pentane Process water Propylene Reservoir water Salt water Scale squeeze Vinyl acetate Waste water Pump units Pump units Hammelmann offer a wide range of process pump units for the chemical, oil and gas industries. HDP 235 - Pentane Op. pressure 350 bar Flow rate 300 l/min T Typical applications ypical applications Methanol injection Fatty alcohol process LDPE Wet oxidation CO2 extraction Mill scale removal Non woven fabrics Boiler feed pumps Re-injecting reservoir water HDP 75 – Waste water Op. pressure 160 bar Flow rate 83 l/min HDP 45 - LDHI Op. pressure 1035 bar Flow rate 11,5 l/min Recommendations and Recommendations and standards standards EU Machine directive 98/37/ EU ATEX 94/9/EU API 674 (with exceptions) HDP 175 – Acrylic acid Op. pressure 2500 bar Flow rate 13 l/min Other customer specified standards, i.e. NORSOK M501 NORSOK M650 NACE MR 0175 NACE MR0175 HDP 255 - Methanol Op. pressure 285 bar Flow rate 250 l/min HDP 755 – Reservoir water Op. pressure 212 bar Flow rate 1660 l/min 07/09 © Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Technische Änderungen vorbehalten. Hammelmann Maschinenfabrik GmbH Postfach 3309 • D-59282 Oelde Zum Sundern 13-21 • Germany eMail: mail@hammelmann.de • Internet: www.process-pumps.de Telefon (0 25 22) 76-0 Telefax (0 25 22) 76-444 w www.process-pumps.de ww.process-pumps.de

  2. Series 5 process pumps Series 5 process pumps Plunger speed Plunger speed Hammelmann series 5 Triplex and Quintuplex pumps provide the highest standards of safety and reliability. HDP 755 Compact construction Compact construction HDP 485 The integral speed reducer with twin helical gears arranged in a herringbone configuration ensures smooth running and even power transmission without axially loading the bearings. Hammelmann pumps produce maximum performance from a minimal footprint which is the result of combining a compact integral speed reduction gear end with the concept of a vertical configuration. HDP 365 HDP 255 Sealing systems Sealing systems HDP 175 HDP 125 The seal designs which are absolutely unique to Hammelmann enable safe, reliable, continuous duty operation at pressures up to 3800 bar. The choice of high pressure seal system depends upon the pump’s application. Labyrinth seal The high pressure seal is formed within the minute cylindrical gap between the plunger and the labyrinth insert. The medium pressure is continuously reduced along the sealing surface. A minimum amount of high pressure leakage serves as lubricant and is returned to the pump suction chamber. Packed seal PTFE/Graphite rings maintain the high pressure seal while plunger guidance is provided by a separate bush. HDP 75 HDP 45 HDP 25 V Valves alves 0 Plunger speed m/sec 0,2 0,4 0,6 0,8 1,0 1,2 To ensure that the pump constructíon is appropiate for the pumped medium we have a number of alternative valve designs available. Conical/Plate valve The suction valve is in disc form plate design and the discharge valve is conical. Both seat to a one piece component. The series 5 pumps are conservatively rated for power with low plunger speeds ensuring limited wear of plungers and sealing elements. Wetted parts materials Wetted parts materials Plunger Seals Ceramic, tungsten NBR / Polyamide FFKM / PEEK Chromium nickel steel, duplex steel Housings TA-Luft (Clean Air) certified to VDI 2440 Other options available. Gas tight design Gas tight design Our latest variation of this pump series is the Zero emission where the pumped fluid is hermetically sealed within the pump, preventing leakage to atmosphere during operation. The intermediate chamber of the pump can be outfitted with gas tight covers which provide a seal to atmosphere. The chamber is then charged with inert gas. OUT Packed seal Labyrinth seal Low pressure seal packs The suction chamber is sealed by combining spring tensioned PTFE rings either side of a lantern ring which is used either for flushing, cooling or lubricating the seal (optional). IN Twin conical valves Suction and discharge valves are both conical in this configuration Extensive performance range Power ratings up to 750 kW Flow rates up to 2500 l/min Operating pressures up to 3800 bar Viscosities up to 2000 mPa s Fluid temperatures -40 up to +200 °C Bellows system Bellows system The bellows are the hermetic seals for the power end to prevent the intrusion of fluid or gas. They are available in FKM, H-NBR and PTFE.

  3. Series 5 process pumps Series 5 process pumps Plunger speed Plunger speed Hammelmann series 5 Triplex and Quintuplex pumps provide the highest standards of safety and reliability. HDP 755 Compact construction Compact construction HDP 485 The integral speed reducer with twin helical gears arranged in a herringbone configuration ensures smooth running and even power transmission without axially loading the bearings. Hammelmann pumps produce maximum performance from a minimal footprint which is the result of combining a compact integral speed reduction gear end with the concept of a vertical configuration. HDP 365 HDP 255 Sealing systems Sealing systems HDP 175 HDP 125 The seal designs which are absolutely unique to Hammelmann enable safe, reliable, continuous duty operation at pressures up to 3800 bar. The choice of high pressure seal system depends upon the pump’s application. Labyrinth seal The high pressure seal is formed within the minute cylindrical gap between the plunger and the labyrinth insert. The medium pressure is continuously reduced along the sealing surface. A minimum amount of high pressure leakage serves as lubricant and is returned to the pump suction chamber. Packed seal PTFE/Graphite rings maintain the high pressure seal while plunger guidance is provided by a separate bush. HDP 75 HDP 45 HDP 25 V Valves alves 0 Plunger speed m/sec 0,2 0,4 0,6 0,8 1,0 1,2 To ensure that the pump constructíon is appropiate for the pumped medium we have a number of alternative valve designs available. Conical/Plate valve The suction valve is in disc form plate design and the discharge valve is conical. Both seat to a one piece component. The series 5 pumps are conservatively rated for power with low plunger speeds ensuring limited wear of plungers and sealing elements. Wetted parts materials Wetted parts materials Plunger Seals Ceramic, tungsten NBR / Polyamide FFKM / PEEK Chromium nickel steel, duplex steel Housings TA-Luft (Clean Air) certified to VDI 2440 Other options available. Gas tight design Gas tight design Our latest variation of this pump series is the Zero emission where the pumped fluid is hermetically sealed within the pump, preventing leakage to atmosphere during operation. The intermediate chamber of the pump can be outfitted with gas tight covers which provide a seal to atmosphere. The chamber is then charged with inert gas. OUT Packed seal Labyrinth seal Low pressure seal packs The suction chamber is sealed by combining spring tensioned PTFE rings either side of a lantern ring which is used either for flushing, cooling or lubricating the seal (optional). IN Twin conical valves Suction and discharge valves are both conical in this configuration Extensive performance range Power ratings up to 750 kW Flow rates up to 2500 l/min Operating pressures up to 3800 bar Viscosities up to 2000 mPa s Fluid temperatures -40 up to +200 °C Bellows system Bellows system The bellows are the hermetic seals for the power end to prevent the intrusion of fluid or gas. They are available in FKM, H-NBR and PTFE.

  4. Process pumps Process pumps T Typical fluids ypical fluids Acrylic acid Adipoladipinat Amine Ammonia Butane Carbon dioxide Crude oil Diesel oil Ester Ethanol Fatty acids Glucose Glycol Hot water Hydrocarbons Inhibitors Jet fuel LDHI Methanol Methyl ester Pentane Process water Propylene Reservoir water Salt water Scale squeeze Vinyl acetate Waste water Pump units Pump units Hammelmann offer a wide range of process pump units for the chemical, oil and gas industries. HDP 235 - Pentane Op. pressure 350 bar Flow rate 300 l/min T Typical applications ypical applications Methanol injection Fatty alcohol process LDPE Wet oxidation CO2 extraction Mill scale removal Non woven fabrics Boiler feed pumps Re-injecting reservoir water HDP 75 – Waste water Op. pressure 160 bar Flow rate 83 l/min HDP 45 - LDHI Op. pressure 1035 bar Flow rate 11,5 l/min Recommendations and Recommendations and standards standards EU Machine directive 98/37/ EU ATEX 94/9/EU API 674 (with exceptions) HDP 175 – Acrylic acid Op. pressure 2500 bar Flow rate 13 l/min Other customer specified standards, i.e. NORSOK M501 NORSOK M650 NACE MR 0175 NACE MR0175 HDP 255 - Methanol Op. pressure 285 bar Flow rate 250 l/min HDP 755 – Reservoir water Op. pressure 212 bar Flow rate 1660 l/min 07/09 © Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Technische Änderungen vorbehalten. Hammelmann Maschinenfabrik GmbH Postfach 3309 • D-59282 Oelde Zum Sundern 13-21 • Germany eMail: mail@hammelmann.de • Internet: www.process-pumps.de Telefon (0 25 22) 76-0 Telefax (0 25 22) 76-444 w www.process-pumps.de ww.process-pumps.de

More Related