1 / 7

Design solutions for CO 2 cooling systems Manual and electrical valves

Design solutions for CO 2 cooling systems Manual and electrical valves. Bart Verlaat Nikhef 1July 2010. Introduction. The Swagelok 43G and 45 thermal service bal valve is a reliable valve candidate for the use in CO 2 cooling systems.

hart
Download Presentation

Design solutions for CO 2 cooling systems Manual and electrical valves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design solutions for CO2 cooling systemsManual and electrical valves Bart Verlaat Nikhef 1July 2010 bverlaat@nikhef.nl

  2. Introduction • The Swagelok 43G and 45 thermal service bal valve is a reliable valve candidate for the use in CO2 cooling systems. • At Nikhef a valve handle extension is designed to create a thermal resistance to the cold fluid in the valve and the warm outside world. • 40g valves exist in 2-way and 3-way and can be equipped with a manual, electrical or pneumatic actuation. • Extensions for 2 valve types are designed: • 43g series for 1/4” piping (1/4” VCR) • 43g series for 3/8” piping (3/8” HVCR) • 45 series for 3/8” and 1/2” piping (1/2” VCR) bverlaat@nikhef.nl

  3. Valves properties • 43G series ball valve: • SS-43GHLVCR4: 2-way: -53ºC / 206 bar , Cv=2.4 • SS-43GXVCR4: 3-way: -53ºC / 172 bar , Cv=0.9 • 45 series ball valve: • SS-45THLVCR8: 2 way: - 53ºC / 172 bar , Cv=12 • T-shape hole in ball to avoid cold liquid trap (2-way). bverlaat@nikhef.nl

  4. Valve extension • Moisture free isolating support to ambient world • Panel mounting • Identical interface as original valve • Fits to all additional accessories like actuators. • Optimized design w.r.t insulation (As a normal T-joint) • Ideal way of supporting tubing • Extension side 200 mm (Tube center to panel front) • 200mm for both 45 and 43g series • Shorter (131.2mm) version available for 43g serie (LHCb-VTCS length) Ø18 200 (131.2) Ø68 Ø18 Insulation bverlaat@nikhef.nl

  5. Valve extension design 45 Serie version (1/2” Tube) 45 serie version (1/2” Tube) 43g serie version (1/4”-3/8” Tube) bverlaat@nikhef.nl

  6. Extended 43g valve with electric actuator bverlaat@nikhef.nl

  7. Valve extension panel mounting Electrical drive Manual handle Ø18 Ø68 Ø18 bverlaat@nikhef.nl

More Related