1 / 5

1. Install the heat insulation on the floor .

* Install procedure. 1. Install the heat insulation on the floor. 2. Install the power film on the heat insulation. 3. Connect the wire to power film. 4. Connect the thermostat and temperature sensor with power film. * Sectioned drawing. PE-form. Power Film.

hasad-barnett
Download Presentation

1. Install the heat insulation on the floor .

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. * Install procedure 1. Install the heat insulation on the floor. 2. Install the power film on the heat insulation. 3. Connect the wire to power film. 4. Connect the thermostat and temperature sensor with power film.

  2. * Sectioned drawing PE-form Power Film Insulation sheet Ground (side view) plywood Laminate floor Carpet Wood tile (plane figure)

  3. 10.CLOSING - 1 www.nanonap.hu 1.Carpet / PVC Floors PVC Floors DST form Carpet ① Install the heat insulation on the floor.② Install the film on the heat insulation. ④ Install the DST form on the film. ⑤ Cover the PVC floors on the DST form. ① Install the heat insulation on the floor. ② Install the film on the heat insulation. ④ Cover the carpet on the film. NOTICE Please check the local heating.

  4. 10.CLOSING - 2 2.Laminate flooring / Wood tile Form plywood Laminate floor Wood tile Spray bond concrete nail and anchor ① Install the heat insulation on the floor.② Install the film on the heat insulation.③ Install the form on the film. ④ Install the laminate floor. ① Install the heat insulation on the floor.② Install the film on the heat insulation.③ Fixed the plywood by concrete nail after install the plywood on the film. ④ Install the wood tile after spray the bond on the plywood.

  5. 10.CLOSING - 3 www.nanonap.hu 4.Solid wood flooring * Cross section Plywood Solid wood Flooring ① Make hole by hammer drill. ② Insert the concrete anchor to hole. ① Install the heat insulation on the floor. ② Install the film on the heat insulation. ③ Fixed the plywood by concrete nail after install the plywood on the film. ④ Stick the solid wood floor after paint the epoxy on the plywood. ② Fixed by screw.

More Related