1 / 16

Water Quality Criteria and TMDLs

Aquatic Toxicology. Water Quality Criteria and TMDLs. Background. Previosly  origin/effect/toxicity of some pollutants Today  talk about how pollutant levels are controlled (mostly point source). What’s the difference? A Review. Criteria are recommendations

hasad-dean
Download Presentation

Water Quality Criteria and TMDLs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aquatic Toxicology Water Quality Criteria and TMDLs

  2. Background • Previosly  origin/effect/toxicity of some pollutants • Today  talk about how pollutant levels are controlled (mostly point source)

  3. What’s the difference? A Review • Criteria are recommendations • Usually made by EPA, based on scientific data • Allowable levels of toxicants in water or effluent discharge • National level • Standards are laws/regulations which must be followed • May or may not be based on criteria • Regional/state level Note: National Pollutant Discharge Elimination System (NPDES) permitting enforces either criteria or standards at the local level

  4. Types of Criteria • Drinking Water Criteria • Protect human health • Fewest # of standards (25 vs 129 for acute/chronic) because many things harmful to aquatic organisms that are not toxic to human (i.e. copper  limit for drinking water based on taste) • Water Quality Criteria • Acute criteria • Short-term/accidents designed to protect • Maximum values aquatic organisms • Chronic • Long-term • Average values Note: WQC is in-stream concentration, not effluent concentration

  5. Factors on which WQC are based • Toxicity (1°) • Taste/odor • Aesthetic (Fe staining clothing) • General water chemistry (do not want to release large quantities of anything (even if not toxic)

  6. Regulatory background for WQC • Clean Water Act (CWA) • “No toxic compounds in toxic amounts are to be placed in water in the US” • Fosters solution to pollution is dilution • Although it is against the law to do, can “stack the deck” by creating conditions/use conditions which will bring [x] to WQC • Increase impervious surfaces upstream  increase stream flow • Cut trees (logging) upstream  also increase stream flow

  7. Regulations for NPDES B. National Pollution Discharge Elimination System (NPDES permits) • implemented 1975 • Initial goal  zero discharge within 10 years • Goal not met but amount of pollution has significantly decreased • Designed to control amount (load) of specific pollutants discharging into receiving water so as not to be toxic to 95% of exposed organisms. • Based on many minor, two major assumptions: • Toxicologists can provide “biological effects concentrations”  forms basis for WQC • By meeting WQC, discharger is protecting aquatic biota

  8. Additional assumptions • Know [x]up (upstream concentration of regulated compound) • Low flow (minimum flow) – may have to guess based on drainage basin • Maximum discharge of water based on • Maximum [x] of discharge design (conc. of regulated cmpd) considerations Note: above used to determine waste load allocation (Total Maximum Daily Load or TMDL)  mass of compound allowed to be discharged in effluent to meet (not exceed) the in-stream WQC

  9. Look at last three assumptions in more detail • Minimal low flow (September low flow) • Based on upstream low flow (if it has been measured) • 7Q10, Q7,10 weekly low flow which repeats over 10 years (usually occurs between August and October)  drought conditions

  10. More assumptions for determining TMDL # 5 Maximum discharge of water from source #6 Maximum concentration of discharge Both of the above are based on the particular processing requirements of the discharger  may be controlled by discharger (manufacturing) or patially uncontrolled by discharger (sewage treatment plant may not know what is coming “down the pipe” or may get excessive storm drainage in sewer system)

  11. Notation for mass balance at outfall • Need to know to understand rest of lecture • Basically values downstream are based on upstream values + addition/changes from effluent discharge

  12. Qu --------------------------------------------------- Q (= Qu + Qe) Su Mixing zone Qe, Se Outfall (effluent) Waste Load Allocation QuSu + QeSe = Q(s) Qu assumed to be the 7Q10 Qe “ “ “ “ maximum design flow S “ “ “ “ water quality criterion (WQC from EPA) Su is the concentration of toxicant upstream

  13. Tracer study showing longitudinal plume in a river Waste outfall from a chemical plant (pre-CWA)  Direction of flow All pictures from S. Socolofsky and K-A Chang, Texas A&M University Joining of three rivers (decreasing sediment load from left to right)

  14. Exceptions • Unknown 7Q10? (AR has many small dischargers on small strams without gaging station September Qest Qlow (in CFS) = a[(DA)b1]Pb2 Snb3 Where DA = drainage area P = annual precipitation (inches) Sn = “ snowfall “ And a = 1.57 x 10-5 b1 = 1.06 (all are b2 = 2.90 b3 = -0.28 unitless) Note: above constants are used in eastern US above estimate by be off by as much as 100%!

  15. Exceptions • WQC Unknown? (1985 only 65 known, now 129) May use Application Factor (AF) method to estimate s from LC50 data WQC = application factor x LC50 where AF = 0.1, 0.01, 0.001  higher toxicity  use lower AF i.e. Zn  find LC50 for resident species, multiply by 0.01 and use as WQC

  16. More fun with units Flow units = MGD or CFS or CMS (m3/sec) Load units • Load = flow x concentration • Lbs/day = vol./day x mass/V = mass/day

More Related