ARM7TDMI

1. ARM7TDMI ARM Architecture Sai Kumar Devulapalli

2. Objectives • To know the historical background in which ARM Processor is designed. • To understand the organization and architecture of ARM7TDMI Processor Core • To learn how data is handled in ARM7TDMI • Introduction to exception handling modes and other modes available in ARM7TDMI Processor. • Register organization of ARM7TDMI and the usage of registers.

3. Acorn Computer? • Acorn Computers Limited, based in Cambridge, England. • In 1979, Acorn Atom released. Made up with 6502 1Mhz 8 bits CPU. • Not Very famous. • When Acorn meet BBC ( British Broadcasting Corporation), new computer was born?

4. BBC micro? • In 1981, BBC “The Computer Programme” project need to have a computer to demonstrate various tasks including “teletext/telesoftware, comms, controlling hardware, programming, artificial intelligence, graphics, sound and music, etc. “ • The Acorn team worked very hard to make a prototype to BBC and finally BBC accepted their design.

5. Great Success of BBC micro. • As BBC micro used in the programme of the BBC. It becomes very famous in U.K. • Many U.K. Schools/research lab brought the BBC micro. • Later the acorn engineers try to start with new processor.

6. The Birth of ARM. • As acorn can’t find any processor ready on the market is acceptable for their needs, they want to design new processor. • Make new processor need great investment and experience? • Luckily the papers from the Berkeley RISC I were designed. • After some custom modifications by acorn, new RISC processor was born ! • The ARM ( Advanced RISC Machine ).

7. History of ARM Acorn - a Computer Manufacturer 1983: • Acorn Limited: • Dominant position in UK personal computer market with Rockwell 6502 (8- Bit) CPU. 1983: • 16- Bit CISC CPU´s slower than standard memory ports with long interrupt latencies 1983- 85: • Acorn designed the first commercial RISC CPU: • Acorn Risc Machine (ARM) 1990: • Advanced Risc Machine was formed to broaden the market beyond Acorn´s product range

8. History of ARM.. 1990: • Startup with 12 engineers and 1 CEO • No patents, no customers, very little money Mid- 1990s: • T. I. licensed ARM7 • Incorporated into a chip for mobile phones IPO Spring 1998 • 13 millionaires

9. Architectural Inheritance from Berkeley RISC I Used: • Load- store architecture • Fixed- length 32- bit instructions • 3 address format Rejected: • Register windows=> Costly • Use Shadow Registers in ARM • Delayed branches • Single cycle execution of all instructions • Memory Access • Multiple Cycles when no separate data and instruction memory support • Auto-indexing Addressing Modes Result: RISC with a few CISC features

10. What is RISC/CISC? Reduced Instruction Set Computer • Fewer Addressing modes. • Fewer Instructions available. • For example, ARM, NEC VR series. Complex Instruction Set Computer • More Instructions available • Many addressing modes. • For example, Intel x86.

11. Advantages of RISC? • Smaller die size • Simple instructions - simple processor require less transistors. • Shorter development time • Simple processor take less effort to design. • Higher performance? • Disadvantages: • Complex compiler • poor code density

12. The ARM programmers´ model • ARM is a Reduced Instruction Set Computer (RISC). • It has: • a large, regular register file • any register can be used for any purpose • a load- store architecture • instructions which reference memory • just move data, they do no processing • processing uses values in registers only • Fixed length instructions • 32 bit Arm Instruction Set • 16 bit Thumb Instruction Set

13. Main Features • A large set of general purpose registers • A load – store architecture • 3- address instructions • Conditional execution for every instruction • Inclusion of very powerful load-store multiple register instructions • Ability to perform general shift & general ALU operation in 1 instruction that executes in 1 clk cycle • Open instruction set extension through coprocessor instruction set • A unique architecture –THUMB suited to high-volume applications with memory restrictions.

14. ARM7TDMI ARM7TDMI • is the current, low-end ARM Core. • It is widely used across a range of application, notably in digital mobile telephones. The origin of the name ARM7TDMI: • ARM7- a 3 volt compatible rework of ARM6 32-bit integer core • The THUMB 16-bit compressed instruction set. • On-chip Debug support, enabling the processor to halt in response to a debug request. • An enhanced Multiplier, with higher performance than its predecessors and yielding a full 64-bit result. • 4 extra instructions are provided which performs 32 * 32 -> 64 multiplications and 32 * 32 + 64 -> 64 multiply and accumulate • Embedded ICE hardware to give on-chip breakpoint and watch point support.

15. DATA TYPES Byte (8-bit): placed on any byte boundary. Half-word (16-bit): aligned to two-byte boundaries. Word (32-bit): aligned to four- byte boundaries.

16. Processor Modes • The ARM has six operating modes: • User (unprivileged mode under which most tasks run) • Fast interrupt request Mode-FIQ (entered when a high priority (fast) interrupt is raised) • Interrupt Mode-IRQ (entered when a low priority (normal) interrupt is raised) • Supervisor Mode-SVC (entered on reset and when a Software Interrupt instruction is executed) • Abort Mode- ABT (used to handle memory access violations) • Undefined Mode-UND(used to handle undefined instructions) • ARM Architecture Version 4 adds a seventh mode: • System Mode-SYS (privileged mode using the same registers as user mode)

17. N Z C V ARM programming model r0 r8 r1 r9 0 31 r2 r10 CPSR r3 r11 r4 r12 r5 r13 r6 r14 r7 r15 (PC)

18. Endianness Relationship between bit and byte/word ordering defines endianness: bit 31 bit 0 bit 31 bit 0 byte 3 byte 2 byte 1 byte 0 byte 0 byte 1 byte 2 byte 3 little-endian big-endian

19. Instruction fetched from memory Decoding of registers used in instruction Register(s) read from Register Bank Shift and ALU operation Write register(s) back to Register Bank The Instruction Pipeline The ARM uses a pipeline in order to increase the speed of the flow of instructions to the processor. • Allows several operations to be undertaken simultaneously, rather than serially. Rather than pointing to the instruction being executed, the PC points to the instruction being fetched. ARM FETCH PC PC - 4 DECODE EXECUTE PC - 8

20. CPU Pipeline • 3 stages of pipeline. • One instruction issued each cycle. • Each instruction takes at least 3 clock cycles • During 1st data path cycle,each instruction issues fetch for next but one instruction • Branch flushes & refills the instruction pipeline

21. 3-stage pipeline organisation • Register bank – - 2 read ports & 1 write port to access any register - 1 read port & 1 write port to access pc • Barrel shifter- to shift or rotate one operand • ALU – to perform arithmetic & logic functions • Address register & incrementer - to select & hold memory addresses - to generate sequential addresses • Data register – to hold data passing to & from memory • Instruction decoder & associated control logic

22. Latency and Throughput • At any time, 3 different instructions may occupy each of the the 3- stages of pipeline • It may take three cycles to complete a single-cycle instruction. • This is said to have a three cycle latency • Once a pipeline fills, the processor completes a single-cycle instruction every clock cycle. Therefore the throughput is one instruction per cycle.

23. CPU Pipeline Stages • Fetch • Instruction is fetched from memory and placed in instruction pipeline • In data transfer instruction address is sent to address register • Decode • Instruction is decoded • Datapath control signals prepared for the next cycle • Instruction owns decode logic but not datapath • In data transfer instructions ,ALU holds address component to compute auto- indexing modification if required • Execute • Instruction owns datapath • Register bank is read • An operand shifted • ALU result generated • Result written back into destination register

24. Clocking Scheme • 2-phase non- overlapping clocks internally generated from single input clock signal • Uses level sensitive transparent latches • Data movement controlled by passing data alternately through latches

25. Exception Conditions • Generated as direct effect of executing instruction-software interrupts -undefined instructions -prefetch aborts • Generated as a side effect of instruction-Data aborts • Generated externally -Reset -IRQ -FIQ

26. Coprocessor • Support for up to16 logical coprocessors for its Internal Function • Each coprocessor can have up to 16 private registers of any size • Use load-store architecture

27. ARM7TDMI core

28. The Registers • ARM has 37 registers in total, all of which are 32-bits long. • 30 general purpose registers • 5 dedicated saved program status registers • 1 dedicated program counter • 1 dedicated current program status register • However these are arranged into several banks, with the accessible bank being governed by the processor mode. Each mode can access • a particular set of r0-r12 registers • a particular r13 (the stack pointer) and r14 (link register) • r15 (the program counter) • cpsr (the current program status register) and privileged modes can also access • a particular spsr (saved program status register)

29. 30 general-purpose, 32-bit registers • Fifteen general-purpose registers are visible at any one time, depending on the current processor mode, as r0, r1, ... ,r13, r14. • By convention, r13 is used as a stack pointer (sp) in ARM assembly language. The C and C++ compilers always use r13 as the stack pointer. • In User mode, r14 is used as a link register (lr) to store the return address when a subroutine call is made. It can also be used as a general-purpose register if the return address is stored on the stack. • In the exception handling modes, r14 holds the return address for the exception, or a subroutine return address if subroutine calls are executed within an exception. r14 can be used as a general-purpose register if the return address is stored on the stack.

30. Saved Program Status Registers (SPSRs) • The SPSRs are used to store the CPSR when an exception is taken.One SPSR is accessible in each of the exception-handling modes. • User mode and System mode do not have an SPSR because they are not exception handling modes.

31. The program counter(pc) • The program counter is accessed as r15 (or pc). It is incremented by one word (four bytes) for each instruction in ARM state, or by two bytes in Thumb state. • Branch instructions load the destination address into the program counter. You can also load the program counter directly using data operation instructions. For example, to return from a subroutine, you can copy the link register into the program counter using: • MOV pc,lr • During execution, r15 does not contain the address of the currently executing instruction. The address of the currently executing instruction is typically pc– 8 for ARM, or pc– 4 for Thumb.

32. The Current Program Status Register(CPSR) • The CPSR holds: • copies of the Arithmetic Logic Unit (ALU) status flags • the current processor mode • interrupt disable flags. • The ALU status flags in the CPSR are used to determine whether conditional instructions are executed or not. • On Thumb-capable processors, the CPSR also holds the current processor state (ARM or Thumb).

33. ARM General registers and Program Counter User32 / System FIQ32 Supervisor32 Abort32 IRQ32 Undefined32 r0 r0 r0 r0 r0 r0 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r3 r3 r3 r3 r3 r3 r4 r4 r4 r4 r4 r4 r5 r5 r5 r5 r5 r5 r6 r6 r6 r6 r6 r6 r7 r7 r7 r7 r7 r7 r8 r8_fiq r8 r8 r8 r8 r9 r9_fiq r9 r9 r9 r9 r10_fiq r10 r10 r10 r10 r10 r11 r11_fiq r11 r11 r11 r11 r12_fiq r12 r12 r12 r12 r12 r13 (sp) r13_fiq r13_svc r13_abt r13_irq r13_undef r14 (lr) r14_fiq r14_svc r14_abt r14_irq r14_undef r15 (pc) r15 (pc) r15 (pc) r15 (pc) r15 (pc) r15 (pc) ARM Program Status Registers cpsr cpsr cpsr cpsr cpsr cpsr sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq spsr_fiq spsr_svc spsr_abt sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq spsr_irq spsr_undef sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq sprsr_fiq ARM Register Organisation * Shaded indicates Banked Registers

34. Accessing Registers using ARM Instructions • No breakdown of currently accessible registers. • All instructions can access r0-r14 directly. • Most instructions also allow use of the PC. • Specific instructions to allow access to CPSR and SPSR.

35. 28 4 0 31 8 Z C V N I F T Mode Copies of the ALU status flags (latched if the instruction has the "S" bit set). Condition bits The Program Status Registers (CPSR and SPSRs) • Condition Code Flags • N = Negative result from ALU flag. • Z = Zero result from ALU flag. • C = ALU operation Carried out • V = ALU operation oVerflowed • Mode Bits • M[4:0] define the processor mode. Interrupt Disable bits. I = 1, disables the IRQ. F = 1, disables the FIQ. T Bit (Architecture v4T only) T = 0, Processor in ARM state T = 1, Processor in Thumb state

36. Condition Flags

37. The Program Counter (R15) • When the processor is executing in ARM state: • All instructions are 32 bits in length • All instructions must be word aligned • Therefore the PC value is stored in bits [31:2] with bits [1:0] equal to zero (as instruction cannot be halfword or byte aligned). • R14 is used as the subroutine link register (LR) and stores the return address when Branch with Link operations are performed, calculated from the PC. • Thus to return from a linked branch • MOV r15,r14 or • MOV pc,lr

38. Internal Organization of ARM • Two main blocks: datapath and decoder • Register bank (r0 to r15) • Two read ports to A-bus/B-bus • One write port from ALU-bus • Additional read/write ports for program counter r15 • Barrel shifter - shift/rotate 2nd operand by any number of bits • ALU performs arithmetic/logic functions • Address registers/incrementer holds either PC address (with increment) or operand address

39. Datapath activity during data processing instruction • SUB r0, r1, #128; r0 := r1 - 128 • Subtract instruction – one operand is a constant • Constant 128 encoded in instruction passes through barrel shifter to produce 128*0 • ALU operates on the operands and writes the result back to register r0 • PC value in address register is incremented and coped back to r15 and the address register

40. Internal Organization • Data register holds read/write data from/to memory • Instruction decoder decodes machine code instructions to produce control signals to datapath • In single-cycle data processing instructions, data values are read on the A-bus & B-bus, the results from ALU is written back into register bank • PC value in address register is incremented and copied back to r15 and the address register – this allows fetching new instructions ahead of time (instruction pre-fetch)

41. Summary ARM7TDMI • RISC Processor • Load Store Architecture • Fixed length and fixed time pipelined organization • Seven operating modes • Register Organization • 16 GPRs under User mode • 5 Shadow registers under FIQ mode • 5 SP registers for exception mode stack handling • 5 LR registers for exception handling • 5 SPSRs to handle status flag contents • 1 CPSR to indicate status of ALU registers

42. Thank You, Any Questions ?