1 / 11

Chapter 8: Free Energies

Chapter 8: Free Energies. Helmholtz Free Energy, F Gibbs Free Energy, G Enthalpy, H Table 8.1. I. Equilibrium – Ch. 7. In Ch. 7, we started with differences in T, p or μ between two subsystems.

hayden-dodson
Download Presentation

Chapter 8: Free Energies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 8: Free Energies Helmholtz Free Energy, F Gibbs Free Energy, G Enthalpy, H Table 8.1

  2. I. Equilibrium – Ch. 7 • In Ch. 7, we started with differences in T, p or μ between two subsystems. • The total system was isolated from the surroundings but U, V or N were exchanged (the variables) between the subsystems. • As a result, equilibrium was associated with maximum S(U, V, N).

  3. Equilibrium – Ch. 8 • Now consider a sealed test tube in which V and N are constant. This test tube is in a constant water bath, so heat (= energy) is exchanged to maintain constant T. (Confirm using First Law) • When T, V and N are the variables, then equilibrium is associated with minimum F(T, V, N): dF ≤ 0. Eqns 8.1 – 8.6

  4. Natural Variables • There is a distinction between “variables” and “natural variables” of thermodynamic functions (TF). • When a TF is expressed in terms of its natural variables, then the TF can be used to find equilibrium. I.e. the Extremum Principle is justified. • Max S(U, V, N) but not S(T, V, N) • Min G(T, p, N) but not G(U, V, N)

  5. Thermodynamic Function, F • F(T, V, N) = U – TS is called the Helmhotz Free Energy. • Then dF = dU – T dS ≤ 0 and equilibrium is associated with min U and max S at constant T. • dF = (δF/δT)V,NdT + (δF/δV)T,NdV + Σ(δF/δNj)V,T,Ni dNj = - S dT – p dV + Σμj dNj • Examples 8.1, 8.2

  6. Thermodynamic Function, H • H(S, p, N) = U + pV is called Enthalpy. • dH = T dS + V dp + Σμj dNj Eqn 8.22 • ΔH values are experimentally accessible (calorimetry).

  7. Thermodynamic Function, G • G(T, p, N) = H –TS is called the Gibbs Free Energy. • dG = -S dT + V dp + Σμj dNjEqn 8.25 • Then dG = dH – T dS ≤ 0 and equilibrium is associated with min H and max S at constant T. • Note Table 8.1

  8. II. More Applications • Ch 7 Tools • In an adiabatic process, w  ΔU (dU = δw) • Using the First Law, q  ΔS (δq = dS/T) (Carnot Cycle) • Ch 8 Tools • Heat Capacity • Cycles

  9. Heat Capacity  ΔU, ΔS  ΔF • q = heat αΔT and the proportionality constant is specific heat (J/g-K) or heat capacity (C, J/mol-K) • Note C may = f(T); Table 8.2 • When ΔV = 0 (bomb calorimeter), dU = δq. Then CV = (δq/dT)V = (∂U/∂T)V = T(∂S/∂T)V • dU = CV dT and dS = CV dT /T Eqn 8.31 • Ex 8.5, 8.6

  10. Heat Capacity  ΔH, ΔS  ΔG • When Δp = 0, then dH = δq. Then Cp = (δq/dT)p = (∂H/∂T)p = T(∂S/∂T)p • dH = Cp dT and dS = Cp dT /T Eqn 8.34

  11. Cycles (ΔTF = 0)  non-measurables • Determine ΔH for a phase change not at equilibrium. • Internal combustion engine • Adiabatic gas expansion • Otto Cycle (note compression ratio)

More Related