1 / 11

Keeping Workers Safe at Heights – PPE and Fall Protection Training

Falls are a major factor in both workplace fatalities and injuries. Workers will be protected by OSHA Fall Protection training while employer liabilities & reputational damage are reduced.

hazwoperosha
Download Presentation

Keeping Workers Safe at Heights – PPE and Fall Protection Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Keeping Workers Safe at Heights – PPE and Fall Protection Training

  2. Whatever industry you work in, keeping your workers safe is of paramount importance. Of course, you need to keep in compliance with Occupational Health and Safety Administration (OSHA) standards. Failing to comply and allowing workers to be injured can carry stiff financial penalties. As you’re well aware, OSHA keeps a close watch on industry when it comes to the safety and well-being of employees. And OSHA believes that far too many preventable injuries, illnesses, and deaths occur in the workplace. Accidents and exposures that could have been easily prevented if proper measures and training had been implemented. But penalties aside, we need to understand the impact that workplace illnesses and injuries have, not just on the employee, but on their families as well. Nobody wants to get the call that their spouse, loved one, parent or sibling has been injured, or even killed, due to a workplace accident. Along with the financial hardships incurred—which may or may not be overcome easily—the emotional damage done will stay with them forever.

  3. OSHA’s Most Frequently Cited Workplace Standards Violations The Occupational Health and Safety Administration recently published their top 10 most recently cited standards for Fiscal Year 2021. The list was also presented at the 2021 NSC Safety Congress & Expo by Patrick Kapust, Deputy Director of OSHA's Directorate of Enforcement Programs. For the eleventh year in a row, fall protection (29 CFR 1926.501) remains at the top of the list, as presented on the official OSHA website. In Fiscal Year 2021, there were a reported 5,295 violations cited. The sixth most cited violation was fall protection training requirements, with over sixteen hundred citations issued. Why have fall protection violations remained at the top for so long? Well, it’s interesting to note that fall protection training moved up in the list, being cited as the #8 violation in 2019. It might be safe to infer that a lack of proper fall protection training has led to fall protection violation’s continuing reign at the top of the citation heap. By the way… ladders and scaffolding citations in construction came as the third and fifth most cited violations, respectively.

  4. What Your Team Needs to Know About Working at Heights Remember that number 6 on OSHA’s top 10 list addressed the lack of training for fall protection. (By the way, some websites say that lockout/tagout is #6 and fall protection training violations is #7. This article is based on the official OSHA website information. Either way… it’s a problem to address.) The fact is that you can’t just send people into situations that require fall protection knowledge without ensuring they know the score. That means workers working at heights must know everything from when to use fall protection gear to how to use it properly. OSHA construction safety training needs to be an important part of on-the-job training, and even pre-job instruction. It’s not enough to know how to perform job site tasks. Crew members must know and understand how to work safely as well. This is actually important in any general industry where employees must work at heights, as much as it is critical at construction sites.

  5. What Your Team Needs to Know About Working at Heights So, just what does working at heights mean, anyway? You might be picturing workers perched high off the ground on top of a multi-story building. And certainly, that’s one scenario. But according to OSHA regulations, the height where some form of fall protection is necessary is above 4 feet in general industry and above 6 feet in construction industry. And remember, that could be from the ground level, not necessarily high in the air on a platform or rooftop. Sometimes a personal fall arrest system (PFAS) isn’t required and may even get in the way. For example, you likely wouldn’t use a fall protection harness to climb stairs, walk across catwalks, or work on a stationary platform. Fall protection in the form of guardrails, hand rails, and toe-boards would provide the required protection. Note, however, that climbing some fixed ladders may require fall protection gear. Again, this shows how important properly conducted OSHA training programs are, not only to inform workers, but keep confusion to a minimum as well.

  6. What Your Team Needs to Know About Working at Heights

  7. What Your Team Needs to Know About Working at Heights Even the choice of lanyard is often dependent on the job site application. The two basic types are fixed-length energy absorbing lanyards, and self-retracting lanyards called SRLs. SRLs give the most possible range of movement and come in a variety of lengths. Web-style SRLs are often used indoors, while cable-style SRLs are used in outdoor environments or in areas where more durability against abrasions or high heat is required. If using shock-absorbing lanyards, the worker must be anchored at least 17.5 to 18 feet above the next surface. These lanyards have coiled up webbing that is pulled from a pouch to slow down and absorb the shock of the fall at the end. Obviously, if a lanyard doesn’t fully deploy before the worker hits the ground, serious foot, leg, and back injuries could be incurred.

  8. Best Practices for Training Workers in Fall Protection and Other Safety Topics Training your construction crew is vitally important. And it’s important that it be done correctly and to OSHA specifications. Yes, OSHA does have specific recommendations and requirements for any type of safety training. 29 CFR 1926, Subpart C, standard number 1926.21 addresses the general requirements and employer responsibilities for safety training. As for the responsibilities: 1926.21(b)(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. Train workers about job hazards in a language that they can understand. In almost every standard regarding training in any safety topic, you’ll find that one common theme. The training must be understandable by the employee, regardless of language, educational level, or other personal circumstances. Not only that, but, the training must also be documented properly and records retained: 1926.503(b)(2) The latest training certification shall be maintained.

  9. Best Practices for Training Workers in Fall Protection and Other Safety Topics Training your construction crew is vitally important. And it’s important that it be done correctly and to OSHA specifications. Yes, OSHA does have specific recommendations and requirements for any type of safety training. 29 CFR 1926, Subpart C, standard number 1926.21 addresses the general requirements and employer responsibilities for safety training. As for the responsibilities: 1926.21(b)(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. Train workers about job hazards in a language that they can understand. In almost every standard regarding training in any safety topic, you’ll find that one common theme. The training must be understandable by the employee, regardless of language, educational level, or other personal circumstances. Not only that, but, the training must also be documented properly and records retained: 1926.503(b)(2) The latest training certification shall be maintained.

  10. Best Practices for Training Workers in Fall Protection and Other Safety Topics There are resources on the OSHA website you can use to form a qualified training program. Some companies do that. It can be time-consuming to say the least. Another option that many employers are turning to is hiring training companies that specifically specialize in compliant safety training. These companies are equipped and prepared to ensure all employees understand the ins and outs of the safety topics presented. While many in-person training programs are held at the employer’s on-site location, an increasing number of OSHA online training courses are offered that can be accessed by individuals via computer, laptop, tablet, or smartphone. The employees are able to study at their own pace, take certification tests online, and those tests are stored in a database to satisfy OSHA’s documentation retention requirements. The cost of these programs is minimal compared to the potential costs associated with injuries, deaths, and OSHA penalties. Safety doesn’t cost on the construction site… it pays off with huge dividends. Article provided by Fred Pineda, American Safety Associates, LLC. ASA provides its customers with quality safety products including fall protection harnesses and gear, respiratory protection products, PPE wear, and first aid products.

  11. Contact US! 1-866-429-6742 https://hazwoper-osha.com/ info@HAZWOPER-OSHA.com

More Related