1 / 64

Lab Safety Trivia

Lab Safety Trivia. Next. General Safety. What is the first thing each student must do upon entering the lab?. General Safety. Put on Safety Glasses. General Safety. What is the consequence for not wearing appropriate clothing for lab days?. General Safety.

hedia
Download Presentation

Lab Safety Trivia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lab Safety Trivia

  2. Next

  3. General Safety What is the first thing each student must do upon entering the lab?

  4. General Safety Put on Safety Glasses

  5. General Safety What is the consequence for not wearing appropriate clothing for lab days?

  6. General Safety Loss of lab time, loss of project points

  7. General Safety While in the lab, you should not talk to someone while they are doing what?

  8. General Safety Operating a machine

  9. General Safety What should be done throughout and at the end of each class period?

  10. General Safety Thorough clean-up

  11. Band Saw The saw guide should be set to within ______ of the stock before turning on the power.

  12. Band Saw ½ inch

  13. Band Saw Where is a bad place to stand while a band saw is in operation?

  14. Band Saw At the right side of the saw table

  15. Band Saw Why is this saw called a “Band Saw?”

  16. Band Saw The blade is a large revolving band.

  17. Band Saw What must you first do in order to make a curved a cut using the band saw?

  18. Band Saw Make relief cuts

  19. Mitre Saw Before cutting into your material, make sure the saw blade is at full _______?

  20. Mitre Saw speed

  21. Mitre Saw What should the material be firmly and securely held against while cutting?

  22. Mitre Saw The Fence

  23. Mitre Saw As you pass the blade through your material, which direction do you slide the blade?

  24. Mitre Saw Away from you.

  25. Mitre Saw You should always keep your hands at least inches from the saw blade.

  26. Mitre Saw 8

  27. Miscellaneous Machines -2 Part Question- With which machine are you required to clamp your work to the table and why?

  28. Miscellaneous Machines Drill Press, to keep the drill from catching your material and spinning it around And Mitre saw if possible, for extra stability

  29. Lose a Turn!

  30. Miscellaneous Machines When using the drill press, you lower the spinning bit approximately how far before backing it out?

  31. Miscellaneous Machines ½ inch

  32. Miscellaneous Machines When using the spindle sander, you always sand in what direction compared to the spindle movement?

  33. Miscellaneous Machines Opposite

  34. Sander Safety It is important that you always use pressure when using any of the power sanders.

  35. Sander Safety Light

  36. Sander Safety Why should the material being sanded always be kept on the work table?

  37. Sander Safety It reduces the chance of the material being pulled out of the operator’s hands and hurting someone.

  38. Sander Safety Always keep your hands away from ______?

  39. Sander Safety Moving Sandpaper

  40. Lose a Turn!

  41. General Saw Safety Your fingers should always be a minimum of inches away from a moving saw blade.

  42. General Saw Safety 2

  43. General Saw Safety What should you do to protect yourself if your fingers are going to be near a moving saw blade?

  44. General Saw Safety Use a Push Stick

  45. General Saw Safety Once you have finished cutting your material and have turned off the machine, what do you do next?

  46. General Saw Safety Wait for the blade to stop moving

  47. General Saw Safety In the correct order, what 3 steps should you take if a blade breaks while you are operating a saw?

  48. General Saw Safety Shut it off, Unplug it, Go get the teacher

  49. Tool ID

More Related