1 / 6

Ethernet Standards IEEE802.3

Ethernet Standards IEEE802.3. Data Link Layer contains two sub-layers: Media Access Control (MAC) Logical Link Control (LLC) Four generic Ethernet frame standards of IEEE 802.3 Ethernet 802.3 (Raw) (No LLC information, supports IPX/SPX only)

hedva
Download Presentation

Ethernet Standards IEEE802.3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ethernet Standards IEEE802.3 • Data Link Layer contains two sub-layers: • Media Access Control (MAC) • Logical Link Control (LLC) • Four generic Ethernet frame standards of IEEE 802.3 • Ethernet 802.3 (Raw) (No LLC information, supports IPX/SPX only) • Ethernet 802.2 (contains LLC header, supports IPX/SPX and FTAM) • Ethernet II (no LLC header, uses Type instead of Length, supports IPX/SPX, TCP/IP) • Ethernet SNAP (with extended LLC capacities, support TCP/IP, IPX/SPX, AppleTalk Phase 2) Network Layer LLC Sub-Layer MAC Sub-Layer Physical Layer

  2. Ethernet Standards • Not all frame types can support all traffic variants. For example, NetWare IPX/SPX packets are usually transmitted by 802.3 (Raw) frames. In fact, the 802.3 (Raw) frame type can only support IPX/SPX traffic. When TCP traffic is generated, the Ethernet II frame is often used. Some desktop LAN analyzers will employ Sub-Network Access Protocol (SNAP) frames.

  3. Ethernet/IEEE 802.3 Frame Destin address Source address Logical Link Control data FCS 4 6 6 2 46 - 1500 octets 7 Frame Check Sequence Preamble (for synchronization) (01010…0111) IEEE 802.2 LLC standard for access to higher layers. PAD may be added to ensure enough length for Collision Detection (CD) Type (Ethernet II, TCP/IP - 0800H, IPX - 8138H) Length (IEEE 802.3) If the value > 0x05-DC (decimal 1500), then Ethernet II

  4. Logical Link Control Sub-layer LLC header Destin address Source address P A D Type Data FCS Destination Service Access Point (DSAP) 1 octet Source Service Access Point (SSAP) 1 octet Control Field 1 octet

  5. IEEE 802.2

  6. More Ethernet Information http://www.techfest.com/networking/lan/ethernet.htm http://www.networkmagazine.com/magazine/tutorial/hardware/9602tut.htm http://telecom.tbi.net/frmlan.html

More Related