1 / 18

MOTORISATION of equatorial mounts by PIC-ASTRO

MOTORISATION of equatorial mounts by PIC-ASTRO. Arnaud GERARD. 5 Octobre 2006. www.astrimage.org Auteur:. Introduction.

hedy-mcconnell
Download Presentation

MOTORISATION of equatorial mounts by PIC-ASTRO

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MOTORISATIONof equatorial mountsby PIC-ASTRO Arnaud GERARD 5 Octobre 2006 www.astrimage.org Auteur:

  2. Introduction This presentation aims to understand the needs of the most demanding amateur astronomers : the astrophotographer,   to propose an economic solution to meet those needs and economic enough to put to all 2 www.astrimage.org

  3. Need for astrophotography In order needs are : • Tracking the most perfect possible (considering the equipment used) • A good autoguiding for long exposures • An accurate goto to centrate at 100% invisible target All these needs ask specific technical problems, the best system is one that solves al and with the best result. 3 www.astrimage.org

  4. Tracking problems The main problem is the periodic error (PE) It is directly linked to the mechanical quality of the mount and settings on it One of the fireworks used is the system of periodic error correction (PEC). But this is only a trick to be effective as it should be that this error is fully reproducible and unfortunately it is never the case. If the EP curve is smooth, the auto is the only viable solution to an acceptable result. The second problem is the accuracy of the set up of the mount There is no miracle, it must complete the set up of the mount using the old methods which give full satisfaction (method of King or Bigourdan). Setting station must always be verified. Only autoguiding allows up errors of setting station The third problem is the quality of the tracking His speedmust be accurate and the tracking as flow as possible. The fluidity is directly dependent on the frequency with which the position of the mount is adjusted. 4 www.astrimage.org

  5. Problèmes liés à l’autoguidage • Précision des ordres de correction Le logiciel qui calcule les corrections doit pouvoir le faire avec le moins d’erreur possible . Cette précision dépend de celle des acquisitions qui elle-même dépend de la fluidité de la vitesse de suivi et aussi de celle de la vitesse de correction. Pour ne pas perturber les calculs de ce logiciel il faut que les 2 vitesses aient la même fluidité. Les ordres de correction doivent être pris en compte le plus rapidement possible. • Problèmes dus aux rattrapages de jeu Les rattrapages de jeux sont dus à l’ensemble mécanique d’entraînement des axes et se révèlent lors du changement de sens de rotation des moteurs. En AD le problème n’existe pas réellement car il suffit de réduire la vitesse pour effectuer une correction négative (le moteur AD ne change jamais de sens de rotation). En De le problème est réel et il faut pouvoir calibrer ce rattrapage de façon précise bien que ce rattrapage ne soit pas véritablement constant. La solution idéale est donc de procéder à un décalage de la MES afin que les corrections se fassent toujours dans le même sens. 5 www.astrimage.org

  6. Problèmes liés au Goto Il n’y a pas vraiment de problème lié au Goto on lui demande simplement d’être suffisamment précis pour pouvoir centrer la cible dans le capteur sur des déplacement de quelques degrés (par rapport à un objet bien visible qui sert de référence). Dans ce cas il n’y a pas besoin d’une vitesse élevée (30 ou 40X suffisent) Les problèmes se posent lors de grands déplacements (de plusieurs dizaines de degrés) dans ce cas la MES doit être précise et le logiciel doit bien effectuer les corrections dues à la rotation terrestre et au temps de déplacements. Par contre une vitesse confortable est appréciable mais attention au-delà de 200X il y a des risques non nuls pour la mécanique. 6 www.astrimage.org

  7. PIC-ASTRO • PIC-ASTRO is accessible is an affordable solution to all and fulfills all these needs. PIC-ASTRO was designed for astrophotography with the collaboration of many experienced and novice astrophotographer. • PIC-ASTRO is versatile PIC-ASTRO is usable on any equatorial mount equipped with stepper motors. It is easily configurable. • Developped by amateurs it moves quickly to push ever further the limits. All drawings, tools and binaries are available on www.astrimage.org. • Its cost About 100 € + hardware circuits and motors. • For information and ordering A single address :www.astrimage.org. • Need information, help or to discuss ideas Forumwww.astrocoolpix.netis waiting for you. 7 www.astrimage.org

  8. What is PIC-ASTRO? • PIC-ASTRO is composed of : 1) An electronic box it includes 2 Printed Circuits : an IC logic built around a PIC18F252, and a power part for the motors (drivers: L298). These circuits can be integrated into the mount (HEQ5, EQ6). 2) A PAD ultra low : - 4 pushing buttons for movements - 1 potentiometer to adjust speed manually - 1 inverter to choose adjustment of movement or focus - 1 pushing button to lighted a red LED. 3) Cables to the motors 4) Serial cable to pc 5) it’s supplied in 12 V. 8 www.astrimage.org

  9. Operating principles • A timer is used as time base The timer period is chosen by the user according to the characteristics of his mount. The solar and lunar velocities are obtained by changing its period. This value is usually between 0.5ms and 2ms. • 2 timers used to generate μsteps A timer for each motor. They currently operate at up to 14KHz and generate 256μsteps by half step, they can generate up to 1024 μsteps by half-step. • Tracking speed It is determined by the number of ittimer between 2 μsteps (V1AD <= 127) the maximum speed is Vmax = 8 x V1AD. • Serial port For the connection to a PC, PDA or MEROP it is used for the LX200 or downloading to the PIC. 9 www.astrimage.org

  10. µsteps managements • The smallest micro step is limited to 300µs (Minimum recommended IT) So 0.0045 "for a Vmax of 8. • The µsteps are adjustable By the configuration software, we can adjust 8 μstep by half-stepto obtain a smooth engine. • Linearization of µsteps This operation is to create μsteps intermediate (between 2μsteps predefined) in the case of tracking or autoguiding. This helps improve the fluidity of movement, the position of the mount is adjusted to each IT ie every 1ms. This allows you to generate up 256μsteps by half-step. 10 www.astrimage.org

  11. Adjustments 11 www.astrimage.org

  12. Adjustments next 12 www.astrimage.org

  13. Results 1/2 • Speeds The speed tracking is consistent with the expected result, the target remains at the center of the sensor of a Webcam for more than 6 hours to F = 1000. PIC- ASTRO manages speeds up to 63 per axis: V1 tracking speed 1X μsteps linearized V2 autoguiding speed μsteps linearized   V3 to V16 slow speeds of 3X to 16X in μsteps V17 to V63 fast speeds 16X max speed in half-step • Accuracy tracking The linearization of µsteps enable an unparalleled fluidity, difficult to measure without using a lase permet d’avoir une fluidité inégalée, difficilement mesurable sans l’aide d’un laser. www.astrimage.org 13

  14. Results 2/2 • Accuracy in Goto It depends on the accuracy of the set up of the mount, the measurements give + - 2.5’. • Autoguiding accuracy measured to + - 0.17 pixel but always being improved (+ -0.11 pixel to date) • Measurements were made by V. STEINMETZ http://xmcvs.free.fr/picastro/index.htm Note: The measures of precision are lost in the sound of turbulence. 14 www.astrimage.org

  15. MEROP smart hand controller • Ideal complement to PIC-ASTRO Denis PEROTTO has developed a smart hand-controller : MEROP. Merop is an autonomous box that can order any mount compatible with the LX200 protocol. Key features : • Progressive Joystick guidance for variable speed • Using specific commands to maximize the use of PIC-ASTRO • Protocol LX 200 , the possibility to change to over protocols • LCD screen 4x16 backlighted • Embedded databases : Messier, NGC, IC, personnal database... • Scalable and modular • Multi-lingual, currently French and English Check www.astrimage.org. 15 www.astrimage.org

  16. Improvements • Changing the power part The serial resistors dissipate a lot of heat with the most powerful motors, there are waste of energy which can be awkward when using battery as power source. • And others Each has its limitations. To go even further Astrimage the association was created to bring together people in various fields so that they can take an active part in the development of such projects. 16 www.astrimage.org

  17. Documentation • The documentation is being updated to version PIC-ASTRO A1. • The evolution of software PIC-ASTRO is permanent.   Successive versions are downloadable. • Everything is available on www.astrimage.org. 17 www.astrimage.org

  18. Demonstrations • pure Performance Test of maximum speed to show the available reserve • Viewing µsteps with laser autoguiding records • Use in manual without computer • Use with Merop • Steering PC Sync command Position in real times Focus motor 18 www.astrimage.org

More Related