1 / 2

Zealtek, L.L.C. Ph: (517) 546-4880 ● Fax: (517) 546-4808 Zealtek

“Providing Clear Solutions to Industry”. Oasis Station. A Cost-Savings Facility Solution !. Zealtek, L.L.C. Ph: (517) 546-4880 ● Fax: (517) 546-4808 www.Zealtek.com. Oasis Station. CENTRALIZED SERVICE AREA Drinking Fountains Wash Sinks Soap Dispenser Towel Dispenser Mop Sink.

helen
Download Presentation

Zealtek, L.L.C. Ph: (517) 546-4880 ● Fax: (517) 546-4808 Zealtek

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. “Providing Clear Solutions to Industry” Oasis Station A Cost-Savings Facility Solution ! Zealtek, L.L.C. Ph: (517) 546-4880 ● Fax: (517) 546-4808 www.Zealtek.com

  2. Oasis Station • CENTRALIZED SERVICE AREA • Drinking Fountains • Wash Sinks • Soap Dispenser • Towel Dispenser • Mop Sink • LOWERS INSTALLATION COSTS • Single Potable Water Drop • Single Electrical Drop • Single Waste Connection • ADDRESSES SAFETY CONCERNS • Options Include: • Drench Showers, Eye Wash and • First Aid Kits FLEXIBILITY • Easily Relocated PLANT WIDE COMMONALITY • Identical Units Throughout a Facility Utility Requirements The standard units are equipped with a 10 kva transformer and a 30 amp fused disconnect with 30 amp fuses, the units should be supplied with 460v 1PH through a 30 amp buss plug with 30 amp fuses. A ¾”-1-1/2” potable water drop is also required. The unit is equipped with a backflow preventer and a 12-gallon electric water heater. The units have a 1 ½” vent that needs to be piped to the truss or outside the plant. (Plant specifications determine the termination point of the vent) Units will have a 2” galvanized waste discharge line that needs to be terminated into a process or sanitary waste line. Dimensions 4’wide by 4’deep without a mop sink, eyewash, or drench shower. Add approximately 2’ to the width for adding a mop sink and an additional 2’ to the width if an eye wash and drench shower are required. The units are approximately 6’6” –7’6” high depending on options. Allow 2’ from the back of the unit for service of the unit. General Information The standard units are made of 14 gauge 304SS or 201SS panels that are fastened together to form the unit. The stainless steel panels are laser cut, formed, and all edges ground smooth. The units are complete with a stainless steel vented sump tank with sump pump, backflow preventer, stack light, incoming water shutoff during high sump level, 12-gallon electric water heater, and GFI protected circuits. The units are pre-piped and pre-wired. Drinking fountains, eye wash stations, and drench showers, along with other customer requested options are available. Email: info@zealtek.com or phone (517) 546-4880

More Related