1 / 18

Lathe Machines

Types of Lathes:. Center Lathe Engine Lathe Bench Lathe Capstan & Turret Lathes Automatic Lathes Multi Spindle Lathes Vertical Turret Lathes CNC Lathes. Lathe Machines. Kinematic Scheme of Lathe Machine. Speed Gear Box Headstock. Tool Post. Saddle. Chuck. Tail Stock.

hertz
Download Presentation

Lathe Machines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Types of Lathes: • Center Lathe • Engine Lathe • Bench Lathe • Capstan & Turret Lathes • Automatic Lathes • Multi Spindle Lathes • Vertical Turret Lathes • CNC Lathes Lathe Machines

  2. Kinematic Scheme of Lathe Machine Speed Gear Box Headstock Tool Post Saddle Chuck Tail Stock Feed rod Feed Gear Box Lathe Bed Lead Screw Half Nut Apron Carriage

  3. Lathe Machine – Pulley driven (Light Duty)

  4. Lathe – All Geared High Speed Precision

  5. Lathe – All geared (X- Y Movements)

  6. The machining operations generally carried out in centre lathes are : • • Facing • • Centering • • Rough and finish turning • • Chamfering, shouldering, grooving, recessing etc • • Axial drilling and reaming by holding the cutting tool in the tailstock barrel • • Taper turning by • offsetting the tailstock • swivelling the compound slide • using form tool with taper over short length • using taper turning attachment if available • combining longitudinal feed and cross feed, if feasible. • • Boring (internal turning); straight and taper • • Forming; external and internal • • Cutting helical threads; external and internal • • Parting off • • Knurling

  7. A – Turret Locking Handle, B – Turret, C - Capstan Slide, E - Capstan Slide Block, D - Capstan Rest, F - Sliding Bridge

  8. The capstan lathe, having a relatively short stroke of the tool head and automatic indexing, results in a rapid presentation of the tools to the work. • The turret lathe, on the other hand, is suitable for long and heavy work, the larger size of machines having a capacity for bar work up to 200 mm diameter X 1500 mm long or for chuck work up to 750 mm diameter. Capstan lathes are limited to a maximum of 300 mm diameter chuck works. • It is clear that turret lathes are larger, in size as compared to capstan lathes. Unlike capstans, the turret and dead stops on turret lathes have to be indexed into position by hand. • Capstan and turret lathes give quite effectively the normal accuracy required for interchangeable mass production. The dimensional accuracy may be within 0.002 mm for turning and boring and within 0.005 mm for reaming.

  9. A – Headstock, B – Spindle, C - Pilot Bar, D – Tool post, E - Rear Tool post, F - Cross slide, G - Intermediate saddle, H – Turret, I - Turret Clamp Lever, J - Saddle Looking Lever, K - Star Handle for Turret Operation, L - Turret Apron, M - Turret saddle, N - Intermediate saddle Apron, O - Feed Gearbox

  10. Mini Turret Lathe

  11. Mini Capstan Lathe

  12. Mini Capstan Lathe Specs: • Max. Collet Cap (Round): mm 25 32 32 42 • Spindle Bore dia: mm 32 38 40 50 • No.& Range of Speeds: RPM 3/ 650 to 1600, 3/ 650 to 1600 • 4/560 to 1600, 4/560 to 1600 • Length of Bed: mm 980 980 1210 1210 • Max. Dist. Between Spindle -to Turret Face: mm 275 275 400 400 • Effective Travel of Capstan Slide: mm 95 95 130 130 • Power Required: HP 2 2 2 3

  13. Vertical Turret Lathe – CNC 16’ dia

  14. Vertical Turret Lathe – 88” Dia Table (2 Turret heads)

  15. Vertical Turret Lathe – CNC 46” dia

  16. Multi Spindle Lathe – 6 Spindles Shimada Machinery Co. Ltd, www.smd.co.jp

  17. The 6-Spindle Automatic Lathe uses one spindle for loading and unloading. • The other five spindles are used for turning • The Multi-Spindle Automatic Lathe moves work pieces between 6 or 8 stations (processing locations), with processes such as boring, turning, chamfering, screw cutting, grooving, and drilling conducted at separate stations. • Pos1 loading/unloading requires the most time. This longest position time becomes the cycle time when using a 6 or 8 spindle automatic lathe

More Related