1 / 7

Sound Card Calibration

Sound Card Calibration. Determine computer audio device. In XP, go to Control Panel – Sounds & Audio Devices – Audio Make note of the “Default Device” for both Playback and Recording. Determine Sample Rate. In Fldigi, go to Configure – Sound Card – Settings.

hfitch
Download Presentation

Sound Card Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sound Card Calibration

  2. Determine computer audio device. • In XP, go to Control Panel – Sounds & Audio Devices – Audio • Make note of the “Default Device” for both Playback and Recording.

  3. Determine Sample Rate • In Fldigi, go to Configure – Sound Card – Settings. • In the Sample Rate window (upper) check the values for Capture and Playback. • If the box shows “Native” click on the box and find the numerical value. Make note of the sample rates for both Capture and Playback (the values are probably the same).

  4. Open Check SR program. • Select the correct devices for Input (Recording) and Output (Playback). This is the info you found in step #1.

  5. Select Sample Rate • Enter the sample rate value found in step #2.

  6. ‘Start’ Sound Card SR. • While the program runs you will see changing values displayed in the Sample Rate and Difference windows. • The values will begin to stabilize after several minutes. • You should have values you can use for correction after 3 to 5 minutes.

  7. Enter the Corrections. • Open Fldigi, navigate to Configure – Sound Card – Settings. • Enter the corrections in the boxes in the corrections area – Input value in the RX box, Output in the TX box.

More Related