1 / 16

CHE/ME 109 Heat Transfer in Electronics

CHE/ME 109 Heat Transfer in Electronics. LECTURE 16 – EXTERNAL CONVECTION IN SPECIFIC SYSTEMS. FLOW ACROSS CYLINDERS AND SPHERES. FLUID FLOW ACROSS A CYLINDER PASSES THROUGH SEVERAL DIFFERENT FLOW REGIMES. VELOCITY PATTERNS.

hidi
Download Presentation

CHE/ME 109 Heat Transfer in Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHE/ME 109 Heat Transfer in Electronics LECTURE 16 – EXTERNAL CONVECTION IN SPECIFIC SYSTEMS

  2. FLOW ACROSS CYLINDERS AND SPHERES • FLUID FLOW ACROSS A CYLINDER PASSES THROUGH SEVERAL DIFFERENT FLOW REGIMES

  3. VELOCITY PATTERNS • THE VELOCITY AT THE CENTERLINE IS ZERO AT THE FORWARD STAGNATION POINT • A BOUNDARY LAYER FORMS AS THE FLUID ACCELERATES AROUND THE CYLINDER WITH DECREASING PRESSURE • THERE IS A POINT WHERE • AND THE VELOCITY REACHES A MAXIMUM Incropera & DeWitt, Fundamentals of Heat and Mass Transfer, 4th Edition, Wiley, 1996

  4. VELOCITY PATTERNS • BEYOND THIS POINT, THERE IS A REVERSAL OF THE PRESSURE AND THE MATERIAL SEPARATES FROM THE BOUNDARY LAYER • VORTICES ARE FORMED AND THE WAKE DEVELOPS SEPARATION POINTS • FOR LAMINAR FLOW (Re < 2x10^5) THE SEPARATION OCCURS AT ~ 80◦ FROM THE STAGNATION POINT • AS Re INCREASES TO HIGHER LEVELS, THE SEPARATION POINT MOVES AROUND TO A MAXIMUM OF ~ 140∘ • THE SIZE OF THE WAKE IS INVERSELY PROPORTIONAL TO THE FORM DRAG

  5. SURFACE ROUGHNESS EFFECTS ON DRAG • BREAKING UP THE BOUNDARY LAYER (USING DIMPLES ON GOLF BALLS OR SPOILERS ON HIGH SPEED VEHICLES) WILL REDUCE THE PRESSURE DRAG. • THE DRAG COEFFICIENT CAN BE REDUCED BY INDUCING TURBULENCE AT A LOWER REYNOLD’S NUMBER

  6. CFD SIMULATIONS OF VELOCITY PROFILES • LAMINAR FLOW • TURBULENT FLOW http://www.math.rug.nl/~veldman/figures/dns-zoom.jpg

  7. FLOW PARALLEL TO THE CYLINDER AXIS • MOMENTUM AND HEAT TRANSFER IS MODELED USING THE FLAT PLATE CORRELATIONS • FOR SPHERES THE SAME EFFECTS ARE PRESENT IN THREE DIMENSIONS • PRESSURE DROP CORRELATIONS ARE SHOWN IN FIGURE 7-17

  8. HEAT TRANSFER COEFFICIENTS • HEAT TRANSFER COEFFICIENTS FOR CYLINDERS AND SPHERES ARE OF THE FORM: • EXAMPLES ARE (7-35) AND (7-36) • PROPERTIES ARE EVALUATED AT FILM TEMPERATURES, EXCEPT FOR THE WALL VISCOSITY • THESE CORRELATIONS INCLUDE A LAMINAR AND A TURBULENT PORTION

  9. FLOW ACROSS A RANGE OF EXTERNAL FORMS • A MORE GENERAL FORM IS Nu = CRemPrn • VALUES FOR FLOW ACROSS A RANGE OF EXTERNAL FORMS ARE SHOWN IN TABLE 7-1 • ALL FLUID PROPERTIES ARE BASED ON THE FILM TEMPERATURE • A VARIATION OF THIS EXPRESSION IS: • FOR THIS VERSION ALL PROPERTIES EXCEPT THE PrSurf ARE EVALUATED AT THE MEAN STREAM TEMPERATURE

  10. LIMITATIONS FOR CORRELATIONS • THESE CORRELATIONS ARE ALL BASED ON: • A SPECIFIC FLUID • SPECIFIC FLOW REGIMES • SPECIFIC SURFACE ROUGHNESS • SPECIFIC RANGES OF Pr AND Re • EXPECTED ACCURACY IS + 20%

  11. FLOW ACROSS TUBE BANKS • EXTERNAL FLOWS OVER BANKS OF TUBES ARE INFLUENCED BY THE RELATIVE POSITIONS OF THE TUBES • THERE CAN BE SHADOWING - WHERE THE WAKE OF AN UPSTREAM TUBE AFFECTS THE BOUNDARY LAYER FORMATION ON A DOWNSTREAM TUBE • THERE CAN BE ADDITIONAL MOMENTUM INTERACTIONS BETWEEN ADJACENT TUBES

  12. FLOW ACROSS TUBE BANKS • TUBE PATTERNS • TUBES CAN BE INSTALLED WITH ALIGNED OR STAGGERED LAYOUTS (SEE FIGURE 7-25) • LOCATIONS ARE CHARACTERIZED IN TERMS OF PITCH (SEE FIGURE 7-26) OR DISTANCE BETWEEN TUBE CENTERS • TRANSVERSE PITCH, ST, IS THE DISTANCE BETWEEN TUBES NORMAL TO FLOW • LONGITUDINAL PITCH, SL, IS THE DISTANCE • DIAGONAL PITCH, SD, IS BASED ON THE DISTANCE BETWEEN TUBE CENTERS IN ALTERNATE ROWS FOR STAGGERED CONFIGURATIONS

  13. CROSS TUBE HEAT TRANSFER CORRELATIONS • THE CORRELATIONS ARE BASED ON THE MAXIMUM FLUID VELOCITY IN THE TUBE BUNDLE, WHICH IS USED TO CALCULATE Re FOR THE FLUID • THIS CAN BE RELATED TO THE FREE STREAM VELOCITY AS FOR ALIGNED LAYOUTS AS: • FOR STAGGERED LAYOUTS • THE SAME EXPRESSION APPLIES WHEN 2(SD - D)>(ST - D) • FOR 2(SD - D)<(ST - D) THEN THE MAXIMUM IS CALCULATED:

  14. CROSS-TUBE HEAT TRANSFER CORRELATIONS • THE GENERAL FORM OF THE CORRELATION IS • FLUID PROPERTIES ARE CALCULATED AT THE MEAN TEMPERATURE WHICH IS THE AVERAGE BETWEEN THE ENTRY AND EXIT OVER THE TUBE BANK • RECOMMENDED EQUATIONS ARE SHOWN IN TABLE 7-2

  15. CROSS-TUBE PRESSURE DROP CORRELATIONS • CONSIDER TUBE CONFIGURATION AS WELL AS Re NUMBER • THESE GRAPHS ALSO USE THE MAXIMUM VELOCITY TO CALCULATE THE Re

  16. HEAT TRANSFER IN ELECTRONICS COOLING • SIGNIFICANCE OF PRINTED CIRCUIT BOARDS ARE EXAMPLES OF FLAT PLATE INSTALLATIONS • IN HIGH HEAT LOAD SERVICES, THE HEAT TRANSFER MAY INCLUDE PASSING COOLING AIR OVER TUBE BUNDLES TO REDUCE TEMPERATURE http://www.flir.com.hk/images/SPLi_ir_PCboard_108.jpg

More Related