1 / 9

Lean On

Lean On. Luke Lindsey, Chuck Lampp, Jeremy Spivack, Matt Hinssen, Thomas Burke, Brady Doudna, and Adam McNally. Remember…. Design. Jig Material : Sanitary Machinability Cost Toughness Withstand 4’ drop UHMWPE Custom Socket Material: Wear Resistant Stiff Delrin or SS 303

hien
Download Presentation

Lean On

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lean On Luke Lindsey, Chuck Lampp, Jeremy Spivack, Matt Hinssen, Thomas Burke, Brady Doudna, and Adam McNally

  2. Remember…

  3. Design • Jig Material: • Sanitary • Machinability • Cost • Toughness • Withstand 4’ drop UHMWPE • Custom Socket Material: • Wear Resistant • Stiff Delrin or SS 303 • T-Bar Material: UHMWPE Torque Wrench Jig Custom Socket T-Bar

  4. Custom Socket Standard Size Hex Tight Tolerances

  5. Assembly Jig *Tight Tolerances * * * * *

  6. Estimated Cost • Note: Torque Wrench = $61

  7. Beckman Machine Quote • With Delrin Socket • 1  $429 • 6  $272 • 12  $242 • With SS 303 Socket • 1  $504 • 6  $315 • 12 $285 • Cost Comparison Est. Cost (Delrin) = $229.60 Est. Cost (SS 303)= $259.90 • Note: Torque Wrench = $61

  8. Potential Cost Improvements • Transition from UHMWPE to HDPE • Also FDA compliant and wear resistant • Decreases total material cost for one jig by $5 • Maybe insignificant • Eliminating T-Slot • Total Cost Decrease ≈ $50 • Will design new way for table attachment • Potentially Velcro  cost per jig ≈ $1 • With Improvements • Total Jig Estimated Cost (w/wrench) ≈ $242

More Related