1 / 12

Panasonic TDE100/200 System Overview

Learn about enhanced walking extensions, CTI information, multi-site programming tools, and TDA to TDE conversion procedures for the Panasonic KX-TDE100/200 system.

hildar
Download Presentation

Panasonic TDE100/200 System Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-TDE100/200 System(Version 1.0) Panasonic Communications Co., Ltd. Office Network Company Edition 1.3 4th July, 2007 Chapter 9Other Functions (2)

  2. Chapter 9Other Functions (2) 1. Enhanced Walking Extension 2. CTI Information 3. Multi-Site PC Programming Tool 4. TDA -> TDE Conversion

  3. 1. Enhanced Walking Extension (1/2) In addition to swapping the settings between extensions (Walking Extension), you can change the status of your extension to "Service-in" or "Service-out" (Enhanced Walking Extension). Service-in : An extension is in use (normal status). Service-out : Extension Dial Lock and Do Not Disturb (DND) are activated on an extension, and the extension user cannot make unauthorized outside calls nor receive calls. Click Here-1 Click Here-2

  4. Ext 301 Ext 302 Ext 303 Ext 331 Ext 334 Ext 332 Ext 333 Ext 321 Ext 322 Ext 321 Ext 322 1. Enhanced Walking Extension (2/2) Distributed Support Desk Employee ‘Hot-Desks’ Remote Worker/Office Worker

  5. 2. CTI Information (1/2) NO USB port for 3rd party CTI server 3rd Party CTI server USB CTI Information with TDE100/200 1. The TDE100/200 does not have USB port for connection to a 3rd Party CTI server. 2. PC Phone and PC Console are supported on TDE100/200. 3. SIP extension can only be monitored by through CTI (It is not possible to control). 4. TSP Version is v3.0 (To be released shortly).

  6. TDE programming tool Menu Item 1-1-Physical Slot-IPCMPR-Card Property-Port Number 2. CTI Information (2/2) (Programming) The CTI connection uses the IP address of the IPCMPR card to accept incoming connections. Both the maintenance port number and the CTI port number are configurable

  7. 3. Multi-Site PC Programming Tool (1/2) • You can make Multi-site programming shortcuts • Up to 4 PBX may be programmed at the same time • Download system data, edit it and then paste it to the other sites easily

  8. IP Network 3. Multi-Site PC Programming Tool (2/2) The current implementation of Multi-site Programming is a temporary version. Full Multi-site Programming will be supported in a future version of the TDE PCMC. RS232C, Modem, and T76USB connections are not available for this feature.

  9. TDA System Data File 4. TDA -> TDE Conversion (1/3) Step.1 Save TDA100/200 System Data Condition To use an existing TDA configuration you must first convert the DSys file to MPR v3.xx System Data KX-TDA100/200 MPR-V3.xx PCMC For TDA100/200 Step.2 Install TDE100/200 PCMC WARNING! During DSys conversion certain portions of data will be erased. MPR_Conversion_Guide.pdf details all affected data in section 2.2. Install PCMC Tool For TDE100/200

  10. TDA System Data File TDE System Data File 4. TDA -> TDE Conversion (2/3) Step.3 Converting the TDA data file to a TDE100/200 data file using TDE100/200 PC Programming Tool Use PCMC menu option ‘Tool – System Data Convert’ to perform the conversion. PC Programming For TDE100/200 Step.4 Remove the TDA100/200 MPR card and Install the TDE100/200 IPCMPR card TDA MPR Card Remove • Power Off PBX • Remove TDA MPR card • Insert TDE SD card and fit DSP16/64 card onto TDE100/200 IPCMPR card • Install IPCMPR into TDA MPR slot • Power On • Initialize the PBX DSP Install TDE MPR Card

  11. TDE System Data File 4. TDA -> TDE Conversion (3/3) Step.5 Connect PC Programming Quick Setup System Data KX-TDE100/200 IPCMPR Card PC Programming For TDE100/200 • Connect to PBX on default IP address (192.168.0.101) using TDE PCMC or connect to PBX by RS232C • Quick setup starts • Load initial data for the required country • Skip ‘Quick Wizard’ prompts • Upload converted TDE data file • System reset • Program in same way as TDA100/200

  12. Chapter 9 Other Functions (2) Thank you very much !

More Related