250 likes | 449 Views
CE 3231 - Introduction to Environmental Engineering and Science. Readings for This Class: 5.5-5.6. O hio N orthern U niversity. Chemistry, Microbiology & Material Balance. Introduction. Water & Air Pollution. Env Risk Management. Atmospheric Dispersion (Modeling)
E N D
CE 3231 - Introduction to Environmental Engineering and Science Readings for This Class: 5.5-5.6 Ohio Northern University Chemistry, Microbiology & Material Balance Introduction Water & Air Pollution Env Risk Management Atmospheric Dispersion (Modeling) The atmosphere is a complex and dynamic system. Under certain conditions, the atmosphere can trap pollution at the Earth surface and lead to adverse health effects. Understanding near surface atmospheric conditions and their effect on pollution dispersion is the point of this lecture.
Air Quality II Topics Covered Include: Adiabatic Lapse Rate Atmospheric Stability Inversions Plume Shapes and Dynamics Gaussian Plume Modeling Simplified Model to Predict Downwind Ground Level Pollution
Adiabatic Lapse Rate • Temperature drops as you increase in altitude Γdry= 9.76 or 5.4 Γsaturated= 6 in tropopause
Atmospheric Stability • Stable Air • Air mass remains at set altitude • Problematic for pollution • Unstable Air • Air mass changes altitude • Favors mixing and pollution dispersion
Temperature Inversions • Stable atmosphere • Nocturnal cooling • Earth cools rapidly, traps colder air on bottom • Pollution can get trapped near surface • Daytime sunlight radiates ground and breaks inversion http://www.metoffice.gov.uk/education/secondary/students/smog.html
Gaussian Plume Modeling where: C (x,y) = downwind conc. at ground level(z=0), g/m3 Q = emission rate of pollutants, g/s sy, sz = plume standard deviation, m uH= wind speed, m/s x,y, and z = distance, m H = stack height
Simplified Plume Modeling (Downwind Ground-Level Concentration)
Gaussian Plume Modeling where: C (x,0) = downwind conc. at ground level (z=0, y=0), g/m3 Q = emission rate of pollutants, g/s sy, sz= plume standard deviation, m uH= wind speed, m/s x,y, z and H = distance, m
Dispersion Constants A – very unstable; B – moderately unstable; C- slightly unstable, D – neutral, E – slightly stable; F – stable
Gaussian Plume Modeling A new power plant releases SO2 at a legally allowable rate of 6.5x108mg SO2 /sec. The stack has an effective height of 300 m. An anemometer on a 10 m pole measures 2.5 m/s of wind, and it is a cloudy summer day. Predict the ground-level concentration of SO2 4 km directly downwind.
Gaussian Plume Modeling Q = 6.5x108mg SO2 /sec H = 300 m. U = 2.5 m/s @ 10 m X= 4 km Atmospheric condition = ? uH = ? sy, sz = ?
Finding the Atmospheric Condition Atmospheric Condition A – very unstable, sunny day with wind speed < 3 m/s B – moderately unstable, sunny day clear night with winds between 3 – 5 m/s C- slightly unstable, sunny day with winds > 5 m/s D – neutralcloudy or overcast day; cloudy night winds > 3 m/s; clear night winds > 5 m/s E – slightly stable cloudy or overcast night winds < 3 m/s F – stable clear night winds < 5 m/s
Finding uH Atmospheric Condition (p value) A – (0.15) B – (0.15) C- (0.2) D – (0.25) E – (0.4) F – (0.6)
Finding sy, sz D – neutral@ 4 km sy= 250 m and sz= 80 m
Gaussian Plume Modeling Q = 6.5x108mg SO2 /sec H = 300 m. U = 2.5 m/s @ 10 m X= 4 km Atmospheric condition = D uH = 5.85 m/s sy= 250 m sz = 80 m
Gaussian Plume Modeling A new power plant releases SO2 at a legally allowable rate of 6.5x108mg SO2 /sec. The stack has an effective height of 300 m. An anemometer on a 10-mile pole measures 2.5 m/s of wind, and it is a cloudy summer day. Predict the ground-level concentration of SO2 4 km directly downwind.