1 / 20

RL/M SERIES

RL/M SERIES. RL MODULATING SERIES WORKING FIELD. mbar. Kg/h. SUITABLE NOZZLES FOR RL/M SERIES (without pin ). COMBUSTION HEAD SETTING. notches N°. kg/h. Nozzle output (input pressure 20 bar). return pressure [bar]. kg/h. Nozzle output (input pressure 20 bar). return pressure [mbar ].

hope-klein
Download Presentation

RL/M SERIES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RL/M SERIES

  2. RL MODULATING SERIES WORKING FIELD mbar Kg/h

  3. SUITABLE NOZZLES FOR RL/M SERIES (without pin)

  4. COMBUSTION HEAD SETTING notches N° kg/h

  5. Nozzle output(input pressure 20 bar) return pressure [bar] kg/h

  6. Nozzle output(input pressure 20 bar) return pressure [mbar] kg/h

  7. Min oil pressure switch on FS2 models (18bar) P P HYDRAULIC SCHEME nozzle output valves servomotor: 28-50 => SQN90.560A2793 70-190 => SQN 31.402A2700 return pressure regulator return valves (two on 130 and 190 type and FS2 mode operation) pump regulator pressure range: from 20 to 24 bar return manometer M type: RL 28 => AL 75 C RL 38 - 50 => AL 95 C RL 70-100-130 => J7C RL 190 => TA 3 air damper pump by Suntec return pressure switch (4bar) manometer by-pass screw bar return suction return

  8. P BURNER STARTING: 0” both the motor and the control box start to run RL 70-190/M M bar return suction return

  9. P BURNER STARTING: 0”- 5” RL 70-190/M M bar return suction return

  10. P BURNER STARTING: 0”- 5” RL 70-190/M M 20 bar bar return suction return

  11. P BURNER STARTING: 0”- 5” RL 70-190/M M 20 bar bar return suction return

  12. P BURNER STARTING: 5”- 47” the servomotor opens to max (130°) RL 70-190/M M 20 bar bar return suction return

  13. P BURNER STARTING: 47”-69” pre-purge at 130° RL 70-190/M M 20 bar bar return suction return

  14. P BURNER STARTING: 69”-106” the servomotor goes to 30° RL 70-190/M M 20 bar bar return suction return

  15. P BURNER STARTING: 108” the transformer is ON RL 70-190/M M 20 bar bar return suction return

  16. P BURNER STARTING: 111” all the oil valves are supplied RL 70-190/M M 20 bar bar return suction return

  17. P BURNER STARTING: 111” all the oil valves are supplied RL 70-190/M M 20 bar bar return suction return

  18. P BURNER STARTING: 111” all the oil valves are supplied; ignition (max 5”) RL 70-190/M M 3 bar 20 bar bar return suction return

  19. P BURNER STARTING: 111” - 126” 1st stage RL 70-190/M M 3 bar 20 bar bar return suction return

  20. P BURNER STARTING: after 116” second stage available RL 70-190/M M 17 bar 20 bar bar return suction return

More Related