510 likes | 659 Views
What is the hydrologic cycle?. A process water follows through the atmosphere, biosphere, geosphere and hydrosphere. What are the 3 main parts of the hydrologic cycle?. P recipitation: liquid water falling from atmosphere onto geosphere or hydrosphere
E N D
A process water follows through the atmosphere, biosphere, geosphere and hydrosphere.
Precipitation: liquid water falling from atmosphere onto geosphere or hydrosphere Condensation: gaseous water that enters the atmosphere and is converted to liquid water Evaporation: liquid water from the geosphere or hydrosphere that is converted to gaseous water in the atmosphere
Local water budget: not in balance (evap. vs. precip) Global water budget: balanced
Small rivulets of water gather together to form mountain streams. These will gather together to create a larger stream called a river.
Describethe differences between a youthful and old-age river.
Dissolved load – particles too small to see Suspended load – particles of small sediment, can be seen as cloudy water Bed load – larger particles such as small pebbles or rocks that are carried along the bottom
A river that has a new steeper gradient as a result of faulting or folding. (returns to a youthful stream)
A place where the river deposits its sediment load into a larger body of water.
Where a stream deposits its load onto land as that stream comes out of a mountainous area and onto flatter land.
When rain waters exceed the ability of the land to absorb the excess water.
Where along a meander is the greatest erosion? Where is the greatest deposition?
Greatest erosion: outside edge of curve Greatest deposition: inside edge of curve
Oxbow lake – part of the meander that gets cut off from the rest of the stream by erosion
Water that is stored below ground in the pore spaces between rocks and sediments.
Refers to how much water that sediment can hold in its pore spaces (the spaces between the particles)
This refers to the ability of water to flow through the rock layers & sediments
The area underground where the pore spaces are filled with air.
The area below ground where the pore spaces are filled/saturated with water.
Water that is contained in the uppermost region of the zone of saturation
Well – water is pumped from the ground Spring – water naturally flows from below ground onto the surface (formed when the water table intersects with the surface of the land)
What is the difference between an ordinary well and an artesian well?
Ordinary well – water must be pumped from the water table to the surface Artesian well – water is held under pressure (cap rock above) and once that pressure is released (with a well), the water flows freely up to the surface
The small funnel shape caused by the rapid withdrawal of water from the water table