180 likes | 195 Views
Transportation of Radioactive Material in the United States. Earl P. Easton. Focus of Today’s Presentation. Regulatory Roles and Responsibilities Approval Process for Transportation Packages Transportation Package Designs Your Questions. Regulatory Roles and Responsibilities.
E N D
Transportation of Radioactive Material in the United States Earl P. Easton
Focus of Today’s Presentation • Regulatory Roles and Responsibilities • Approval Process for Transportation Packages • Transportation Package Designs • Your Questions
Nuclear Regulatory Commission • Licenses the commercial use of Radioactive material, including transportation. • Certification of Shipping Casks • Inspection of Cask Designers, Fabricators • Enforcement of Physical Protection Measures • Emergency Response – assistance to first responders, lead Federal Agency
Department of Transportation • Regulates thetransportation of all hazardousmaterial, including spent fuel. • Hazards communications (marking and labeling of casks, placarding of vehicles, shipping papers, etc.) • Carrier safety (rail and highway safety regulations) • Route selection criteria
Department of Energy • Conducts largest non-commercial transportation of spent fuel and transuranic waste. • Will conduct largest transportation campaign for spent fuel to a Repository • Route selection using DOT selection criteria • Implementation of physical protection measures • Emergency response – assistance to first responders, Coordinating Agency under the National Response Plan • Funding for emergency response training
State and Local Governments • Have lead role in responding to emergencies. • May enact additional safety requirements that are not in conflict with DOT requirements.
Definition of some common terms • Packaging – the actual shipping container • Package – packaging plus approved contents • Cask – a heavily shielded packaging or package
Accident Condition Tests • Apply to all “Type B” packages • Bound (not mimic) the impacts experienced in credible real-life transportation accidents • Impact, puncture and thermal tests are sequential • Are designed to be reproducible and consistent
Acceptance Criteria for Accident Condition Tests • Loss of shielding • Dose rate can not exceed 1 rem/hr at 40 inches • Containment • Release of radioactive material can not exceed an A2 per week. • Criticality Safety • Contents must remain in subcritical configuration
Compliance with Accident Condition Tests • Full scale testing • Pass-fail test • Computer analysis • Computer programs benchmarked against real data • Conservative assumptions • Safety margins • Computer analysis supplemented with: • Full scale component testing • Scale model testing
Certification of Spent Fuel Cask Designs Technical Reviews based on Standard Review Plan. Certification may be based on computer analysis, or full or scale model testing. NRC inspects cask designers, fabricators and shippers to make sure that casks are constructed to approved designs.
NRC approvals for radioactive material shipping packages are published every year. • NUREG – 0383, • Volume 2, Rev. 26 • Available online through ADAMS
Before each shipment a spent fuel cask would be: • leak tested • checked for contamination • surveyed for radiation level