1 / 3

The technology of heat removal using "cylindrical heat exchangers" (Boiler TOM-1)

The technology of heat removal using "cylindrical heat exchangers" (Boiler TOM-1). Applicant : « МЕЭНТЕХ » LLP. Author : Voronov Е. Contacts : tel . +7 (701) 988 86 87, +7 7212 44 55 55. Description :

hubert
Download Presentation

The technology of heat removal using "cylindrical heat exchangers" (Boiler TOM-1)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The technology of heat removal using "cylindrical heat exchangers"(Boiler TOM-1) Applicant: «МЕЭНТЕХ» LLP Author: VoronovЕ. Contacts: tel. +7 (701) 988 86 87, +7 7212 44 55 55

  2. Description: The boiler with a fundamentally new technology of heat removal using "cylindrical heat exchangers" - tubular heating units with water of collectors in the form of "water jacket".With little change in the circuit design, labor, and capital investments -boiler can be used as heating, water-heating or steam; - may increase or decrease the capacity of the boiler Advantages: -fuel economy by 40-50 % in comparison with any kind of " fire-tube , Flue gas " heat exchangers operating on solid fuels ; -fuel savings of at least 20-25 % in comparison with any kind of "water-tube" structures; - can function without additional sources of energy; -low cost and relatively short production of finished products; -ease of assembly and installation of equipment; -ease of operation of the equipment and maintainability; -no need for constant monitoring of its operation (loading of coal is done 2 times a day).

  3. Currentstatus: -Already received the services of technological business incubation on industrial production of the heatexchangemodule through the Technopark "Sary-Arka“. -The amount of funding 6 089.4 thousand tenge.-Established all stages of the manufacturing process.-By the end of 2012 was produced and installed 12 boilers TOM-1

More Related