1 / 6

Draft AASHTO Guide for Geometric Design of Transit Facilities on Highways and Streets

Draft AASHTO Guide for Geometric Design of Transit Facilities on Highways and Streets. Development of Guide. Developed through two Cooperative Research Program (NCHRP and TCRP) projects over the past several years.

ichabod
Download Presentation

Draft AASHTO Guide for Geometric Design of Transit Facilities on Highways and Streets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Draft AASHTO Guide forGeometric Design of Transit Facilitieson Highways and Streets

  2. Development of Guide • Developed through two Cooperative Research Program (NCHRP and TCRP) projects over the past several years. • Resulting research report was reviewed and edited by an ad-hoc working group consisting of reps from: • Technical Committee on Geometric Design • Subcommittee on Design • Standing Committee on Public Transportation

  3. Basis of the Guide • Guidelines are based on a review of AASHTO, TRB, and ITE documents, as well as design reports provided by various transit agencies • Guide also incorporates findings from targeted investigations conducted to fill voids in the assembled information

  4. Purpose • To provide a single, comprehensive reference of current practice in the geometric design and placement of transit facilities on streets and highways • A transit companion to the AASHTO “Green Book” • Targeted toward a wide range of stakeholders • policy makers • highway planners • engineers and designers • traffic engineers • transit service planners • site planners • land developers

  5. Issues Covered • Planning and decision-making guidelines • Bus design parameters and controls, including: • descriptions of vehicle types and characteristics • geometric design controls • highway and transit capacity considerations and guidelines • general transit infrastructure considerations • Bus transit facilities found in controlled-access highway settings (freeways) and along streets • Light rail and streetcar transit operations on streets and roadways • Appendices contain supporting information on: • detailed bus dimensions and turning paths • busways • off-line stations and facilities • pedestrian and bicycle access

  6. Next Steps • Currently out for ballot by: • Subcommittee on Design • Subcommittee on Traffic Engineering • Standing Committee on Public Transportation • Due August 10, 2009 • Review and address comments • Ballot Standing Committee on Highways

More Related